Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs
(27 reviews)
Price: $56.82
In Stock
Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs
Item # BRKH122510
Our Price: $56.82
In Stock
- All Info
- Reviews (27)
- Q & A (0)
- Videos (2)
- Photos
Dexter Accessories and Parts - BRKH122510
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- Bolts
- Dexter
- 10000 - 15000 lbs
- 12-1/4 Inch
Use this hardware kit to mount (2) 12-1/4" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers. For axles with 10,000 lbs to 15,000 lbs capacity.
Features:
- Allows you to install 2 trailer brake assemblies
- Fits 12-1/4" brake assemblies for 10,000-lb to 15,000-lb axles
- Works with electric or hydraulic brakes
- Includes:
- 14 Mounting bolts
- 14 Nuts
- 14 Lockwashers
7-116 Brake Mounting Bolt for 10K, 12K & 15K Brakes
6-17 Nut for Brake Mounting Bolt
5-8 Lockwasher for Brake Mounting Bolt
Video of Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Dexter Brake Assembly Mounting Bolts and Hardware Installation
Speaker 1: Today we're going to be taking a look at the Dexter mounting bolts and hardware for 12 and a quarter inch brake assemblies for 10,000 to 15,000 pounds, part number BRKH122510.Now since our hardware holding our brake assembly on is pretty worn and rusted, you can see that it's covered in rust and half the threads are rolled over, it's really not going to be safe to use those. So we're going to be replacing it with a new hardware kit.So we can just line up the holes on a backing plate and on the axle, and we're going to put our bolts in place, and then we can get the rest of the hardware in.One thing to keep in mind is you want to watch your wires and make sure they're out of the way and they don't get pinched in between the backing plate and the brake assembly.Now just like what came off, we're going to be putting on a lock washer, and then a hex nut to hold the bolts in place. We're just going to get all these on there hand tight so we don't have to worry about the assembly shifting or falling down.With our wire connections made, we can come back and tighten up our seven bolts holding our assembly onto the axle. Again, I'm going to be using a 5/8ths socket to hold the head of the bolt and an 11/16ths wrench to hold the nut on the back side.Just going to go around and snug them all up before I tighten them all the way.And that'll finish up your look at the Dexter mounting bolts and hardware for 12 and a quarter inch brake assemblies for 10,000 to 15,000 pound axles, part number BRKH122510.
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- etrailer mistake
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
Mounting Bolts and Hardware for 12-1/4" Brake Assemblies - 10,000 lbs to 15,000 lbs - BRKH122510
Average Customer Rating: 4.8 out of 5 stars (27 Customer Reviews)
Use this hardware kit to mount (2) 12-1/4" brake assemblies on your trailer. Includes mounting bolts, nuts, and lockwashers. For axles with 10,000 lbs to 15,000 lbs capacity.by: Travis11/14/2017
Great fit , easy to install. Sending before and after pictures
by: Jere09/13/2021
Brake assmblies are the way to go when replacing trailer brakes. Definitely the most economical way to 'do it right'. So easy to install and everything is new.
by: Robert 07/09/2022
Perfect fit and came a day early
by: Robert 10/01/2021
perfect for the job delivered fast
by: Ken 06/01/2021
Awesome. New bolts are always a good id ea
by: Alton02/22/2022
Good product
by: Steve04/10/2022
by: Bryan01/11/2024
by: Matt01/03/2024
by: Scott 11/21/2022
by: Andrey 09/21/2021
by: John 09/26/2023
by: Robert 09/13/2022
by: James 10/17/2023
by: Jimme10/17/2023
by: Susan 09/15/2023
by: Rp08/25/2023
by: Jimmy 05/29/2023
by: Tamara 02/28/2023
by: 06/05/2022
by: Jeffrey 03/22/2023
by: Jason 02/15/2021
by: Kevin 02/22/2023
by: Gregory J07/25/2022
by: Kenny 02/09/2021
25
27
Show More Reviews
See what our Experts say about this Dexter Accessories and Parts
- 12,000 lb Electric Trailer Brakes & Replacement Oil Seal & Bearings For 12k Dexter AxleI was able to find everything you need for your 12,000 lb Dexter axles; the electric brakes, oil cap kit, oil seal, bearings, and races. I verified with Dexter that these are indeed the correct parts for your 12k axles. I'll go ahead and list out each of the parts you need to make it easier to order: - Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Left Hand - 12,000 lbs # AKEBRK-12L - Electric Trailer Brake with Dust Shield - Self-Adjusting - 12-1/4" - Right Hand...
view full answer... - Recommended Brake Assemblies for Tandem Axle Trailer with 12K AxlesThe Electric Trailer Brakes # AKEBRK-12 come as a set for one axle, so you'll receive the left and right brake assembly in each package. If you've got a tandem axle trailer, you'll want 2 sets of them. Since these brake assemblies don't come with mounting hardware you'll also need part # BRKH122510, which is the mounting hardware for brake assemblies this size.
view full answer... - Can Manual Electric Drum Brakes Be Converted to Self-Adjusting By Swapping Brake Adjustment ScrewParts from manual and self-adjusting brakes are not interchangeable. Unfortunately, this means you cannot add the # 048-023-00 to your current brakes to make them self-adjusting. There is more to self-adjusting brakes than the adjuster screw so the best option is to replace the brakes completely. For replacement brakes you can use the Electric Trailer Brake Kit w/ Dust Shields # AKEBRK-10. These 12-1/4" brake assemblies have a 7-bolt brake flange pattern and are rated for 10k axles. If...
view full answer... - Parts Needed To Convert Dexter 10000lb Axles To Electric Over Hydraulic Trailer BrakesI would be happy to recommend everything you will need to convert your Dexter 10000lb axles to electric over hydraulic drum brakes. Starting with the brakes you will need the Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K # 23-410-411. If your current mounting hardware is in bad shape you can use # BRKH122510 for new hardware. For brake lines I recommend the HydraStar Hydraulic Brake Line Kit - Tandem Axle - 25' Long, 3/16" Main Line #...
view full answer... - Difference Between etrailer Electric Trailer Brakes And Dexter Electric Trailer BrakesThe differences between the Electric Trailer Brake Kit w/ Dust Shields # AKEBRK-10 and the Dexter Electric Trailer Brake Assembly # 23-450 are the different manufacturers and that the # AKEBRK-10 have dust shields, and the # 23-450 does not. Also # 23-450 is just the driver side brake assembly, where # AKEBRK-10 includes the driver and passenger side brake assemblies. If you wanted the Dexter Kit you would need the Dexter Electric Brake Kit # 23-450-451 which includes both brake assemblies. Both...
view full answer... - Electric Trailer Brakes for 6,000 lb or 7,200 lb AxleThe only way to know for sure what the capacity is of your axle is to contact the manufacturer with the serial number, but since you said they are 3 inch round axles, you are correct they will almost certainly be either 6,000 lb, 7,000 lb, or 7,200 lb axles. We can actually get you set up with new electric brakes based on the size of your hub and drum. You just need to measure the inside diameter and depth of your drum, as well as know the brake flange mounting bolt pattern to be sure....
view full answer... - Recommended Hub and Brake Assemblies for Dexter 9k Axles w/ Oil Bath Since your trailer was made in 1981 you will need the Dexter Trailer Hub and Drum Assembly item # K08-288-90 you were looking at. This trailer hub is designed for axles made before July of 2009 so unless you have replaced your axle in the last 15 years this is what you want. These are sold individually. You will need two per axle. For a set of brakes you will want the Electric Trailer Brake Kit w/ Dust Shields item # AKEBRK-10. These self adjusting electric brakes are rated for 9,000...
view full answer... - Converting Drum Brakes On A Dexter Military Trailer Axle With 8 On 6-1/2I would be happy to help you choose the correct brake setup for your Dexter Torflex Axle, however there are no manufacturers that currently make electric disc brakes. All disc brakes are powered by a hydraulic cylinder. If you wish to use a disc brake setup controlled by an in-cab brake controller, you will want to consider the HydraStar Electric Over Hydraulic Actuator for Disc Brakes part # HBA16 and an electric brake controller such as the Tekonsha Prodigy P3 Trailer Brake Controller...
view full answer... - Replacement 12 Inch Brake Assemblies for Redline EB01-140 and EB01-145 From Dexter AxleThe EB01-140 and EB01-145 are Redneck Trailer Supply part numbers for a Dexter 12-1/4 x 3-3/8 7-bolt brake assemblies for a 9-10K axle. The proper replacements are available as part # 23-450-451, which includes the left and right self adjusting brake assembly. The mounting hardware is available separately as part # BRKH122510.
view full answer... - Parts Needed to Convert Trailer With Tandem 15k Axles to Electric Over Hydraulic From ElectricWe can get you set up with an electric over hydraulic system for your trailer with 15,000 lb tandem axles. I will say that you will not want to go with the higher pressure 1,6000 psi actuator, which is too high for drum brakes and can potentially blow out the wheel cylinder. What you can do though is go with a 1,200 psi actuator made for drum brakes, which will still give you excellent stopping power. Here is exactly what you will need for your set up: - HydraStar Electric Over Hydraulic...
view full answer... - Converting From Dexter 12K Disc Brakes to Dexter 12K Drum BrakesThe correct Dexter Hydraulic Drum Brake Kit for your Dexter 12K Axle is part # 23-408-409. The Dexter Hydraulic Drum Brake Kit part # 23-406-407 that you referenced is for Dexter 15K Axles and will not work for you. The Dexter Hydraulic Drum Brake Kit uses the same brake mounting flange as your disc brake setup so it will be a direct swap. However, you will still need to obtain the hub and drum. Unfortunately, we do not carry these but the correct part number for the hub is part 8-214-8UC1...
view full answer... - Electric Trailer Brakes for Trailer With 24,000 lb GVWRWe have electric brakes that have the weight capacity for a tandem axle trailer with a nearly 24,000 lb GVWR, and I can tell you how to determine if they will fit, but we don't have any way of knowing the correct brakes for a 1994 Trail King trailer. The electric brakes that do have the capacity you need are the following: - Electric Trailer Brake Kit w/ Dust Shields - Self-Adjusting - 12-1/4" - Left/Right Hand - 12K # AKEBRK-12 These brakes measure 12-1/4" diameter x 5" wide, so in order...
view full answer... - Will etrailer Self-Adjusting Electric Trailer Brake Kit for 10,000 lb Axle Work on Dexter HubsYes, the self-adjusting Electric Trailer Brake Kit w/ Dust Shields # AKEBRK-10 will work on Dexter Axle hub and drums, so long as you have the appropriate 7-bolt brake mounting flange. These brake assemblies are rated for 10,000 lb axles and only require the Mounting Hardware # BRKH122510 to install. I've added a link to a video review for you to check out as well.
view full answer... - Does the 12-1/4" 10K Electric Trailer Brake Kit Come with MagnetsYes, the Electric Trailer Brake Kit part # AKEBRK-10 comes with brake magnets, one for each assembly. The magnets are pre-installed into the assembly. It has everything you need besides the hardware to attach like the Mounting Bolts and Hardware part # BRKH122510.
view full answer... - Is the Electric Trailer Brake Kit for 10K Axles Sold As a PairThe Electric Trailer Brake Kit part # AKEBRK-10 is sold as a pair, so one left and one right. This kit would be sufficient for one axle which is another way of looking at it. If you need new mounting hardware which I do recommend replacing we have this as well, the Mounting Bolts and Hardware for 12-1/4" Brake Assemblies part # BRKH122510 which is again for a pair, therefore one axle.
view full answer... - Electric Brake Kit to Fit with Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb AxlesThe electric brake kit you need to work with the Dexter Trailer Brake Drum for 9,000-lb to 10,000-lb Axles # DX64FR is as follows: - Dexter Nev-R-Adjust Electric Trailer Brakes # 23-450-451 This comes with both the left hand and right hand assemblies, and can be installed using the Mounting Bolts and Hardware # BRKH122510 if your hardware needs to be replaced.
view full answer... - Electric Brake Conversion from Air Brakes on 15,000 lb Axle TrailerThe Dexter Electric Brake Kit w/ Cast Backing - Self-Adjusting - 12-1/4" - Left/Right Hand - 15K # 23-446-447 will fit any 15K axle that have the standard 7 bolt mounting flange. These are self-adjusting brakes so there is no need for manual adjustments after the initial installation. They are labeled left-hand (driver's side) and right-hand (passenger's side) to ensure proper placement. If you need the mounting hardware, I recommend # BRKH122510 for each axle. You will also need...
view full answer... - Electric Trailer Brakes For 12,000 lb Trailer AxleThe electric brakes are something we can set you up with, though we don't have 12k hub and drum options. But the 12,000 lb electric trailer brakes you need are the following: - Dexter Electric Trailer Brake Kit # 23-442-443 The only thing you'll need for your brakes is the mounting hardware, the Mounting Bolts and Hardware # BRKH122510.
view full answer... - Left & Right 10,000 lb Self-Adjusting Dexter Electric Brake Assemblies Yes, the part you mentioned is indeed an electric brake assembly, the 10,000 lb self-adjust Dexter brake assembly. That is the left hand side (driver's side), and the following are the part numbers for the left and right side assemblies: - Left Hand (Driver's) Side: Dexter Electric Trailer Brake Assembly - Self-Adjusting - 10,000 lbs # 23-438 - Right Hand (Passenger's) Side: Dexter Electric Trailer Brake Assembly - Self-Adjusting - 10,000 lbs # 23-439 To mount these you will need the...
view full answer... - Is Dexter Electric Trailer Brake Kit for 7,200 lb Axles for One Axle or TwoThe Dexter Electric Trailer Brake Assembly - 12-1/4" - Left Hand # 23-428 is just one left hand brake assembly; the other side is the Dexter Electric Trailer Brake Assembly - 12-1/4" - Right Hand # 23-429. That is for one axle, and you can order them as a unit with the Dexter Electric Trailer Brake Kit - 12-1/4" - Left and Right Hand Assemblies - 7,200 lbs # 23-428-429. For an adjustment spoon you will need the Brake Adjustment Spoon for Drum Brakes # W80630, and the correct mounting...
view full answer... - Parts Needed to Convert Electric Brakes to Hydraulic Drum Brakes on Kaufman TrailerWe do have everything you need to convert the electric brakes on your trailer to hydraulic drum brake assemblies. I have attached a great article that will walk you through everything that is needed to make this conversion. For the brake assemblies themselves, we do have one kit available in the 12-1/4 x 3-3/8 size you are needing for 10,000 pound axles. The Dexter Hydraulic Drum Brake Kit # 23-410-411 includes both the Left Hand and RIght Hand assemblies and features a 7 bolt mounting...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Jacob T
Video by:
Kathleen M
Installed by:
Cole B
Installed by:
Robert C
Updated by:
Wilson B
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.