Do I grease Bearings Or Just Add Oil After I Have Replaced The Bearings?
Question:
Do you grease wheel bearings of a bigtex 22GN trailer bearing or just add oil when I replaced the bearings
asked by: John D
0
Expert Reply:
Hello Jon, your BigTex 22' Gooseneck trailer uses oil bath hubs correct? If so, you will not add any grease, you will simply add oil after you replace the bearings.
expert reply by:
Jesse M
0
Product Page this Question was Asked From
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 387A
- 25580
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Correct Replacement for Dexter Hub/Drum 8-415
- Article: Trailer Tire Sizing
- Q&A: Difference Between Single, Dual and Free Backing Servo Brake Assemblies
- Q&A: Replacement Brake Magnet Needed for a Hayes M144 or AL-KO K568111 Brake Magnet
- Article: Ram Trailer Tow Prep Package
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Q&A: Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
- Q&A: Spout Diameter of Camco Replacement RV Fresh-Water Spout Item # CAM37102
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)