Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
(109 reviews)
Price: $236.05
In Stock
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2"
Item # 41990-07
Our Price: $236.05
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (109)
- Q & A (0)
- Photos
Draw-Tite Heavy Duty Receiver Hitch - 41990-07
- 2 Inch Hitch
- 16000 lbs GTW
- Weld-On
- 44 Inch Wide
- Class V
- Draw-Tite
- 1600 lbs TW
- 7 Inch Drop
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 7" Tall, weld-on mounting brackets included.
Features:
- Universal-fit trailer hitch lets you tow a trailer with your heavy-duty or commercial vehicle
- Designed for full-size trucks with long wheel bases and heavy-duty suspensions
- Computer-aided steel construction ensures strength and durability
- Oversize safety-chain loops are easy to access
- Tested Tough - safety and reliability criteria exceed industry standards
- Weld-on installation with included side brackets
- Lifetime technical support from the experts at etrailer.com
- Black powder coat finish covers e-coat base for superior rust protection
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
Specs:
- Cross tube dimensions: 44" wide x 3" deep x 3" tall
- Receiver opening: 2" x 2"
- Rating: Class V
- Maximum gross trailer weight: 16,000 lbs
- Maximum tongue weight: 1,600 lbs
- Not for use with weight distribution systems
- Limited lifetime warranty
Draw-Tite Tested Tough
Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.
Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.
In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
41990-07 Draw-Tite Ultra Frame Service Body Receiver with 7" Bracket - Universal - Class V - 2"
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" - 41990-07
Average Customer Rating: 4.8 out of 5 stars (109 Customer Reviews)
Universal-fit trailer hitch fits heavy-duty and commercial vehicles with frames up to 44". Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. 7" Tall, weld-on mounting brackets included.by: Dillon VZ10/09/2017
Hitch came on time and was easy to install being a weld on hitch. Was a good choice for my flatbed as the truck has a frame extension on it from a service box which meant a factory type hitch was not a option. Looking forward to using it more and not having to worry about hitch failure.
by: Scott06/12/2023
The product is awesome, but the order was shipped in complete. I was informed that a similar hitch receiver to what I originally ordered was in stock and ready to ship instead of waiting for the one that was ordered. Only $XX more, no biggie right? I got the brackets in a couple of days but NO cross bar. They shipped it out and by the time I got it, it was basically the same time frame as the original order would have taken and I spent $XX more. Not real happy with the shipping side of things with etrailer.
by: Robbie 10/20/2023
Great universal fit. Weld in was easy and it’s the perfect size for my Freightliner step van. Sturdy, well made product.
by: Andy05/14/2018
etrailer's staff was very helpful in evaluating options for my situation. This hitch works perfectly with my Class C Motor home (RV)
by: Mark R02/19/2012
The hitch is well built. Having 4 wheel drive it gave me the flexablity I needed to mount to the front of my motorhome. I use to carry my cooler rack for surf fishing.
by: Carl 09/05/2023
9 out of 10 times e-trailer gets it 100 percent right.
by: CAPTAIN C03/04/2014
Product was exactly what was needed for our unique application. Required very little modification to fit our fire truck. Thanks
by: Traci 06/16/2020
I purchased a class c motor home and found out after the purchase that the trailer hitch was only for supporting a basket up to 150 lbs. I needed a REAL trailer hitch. Etrailer.com sent me a wonderful hitch - the fabricator that installed it was very pleased with it, it pulls my truck with no worries, it was a reasonable price and came within a week of ordering. I love it, just what I needed - Thank you
by: John 12/22/2019
The trailer hitch from eTrailer arrived quickly. It is a robust hitch with plenty of towing capacity. I have a GMC box truck and will be using it to tow a utility trailer from New York to Arizona. Tow hitches for box trucks are hard to find. This one has a tow capacity of 16,000 lbs. I am pleased with the quality of the unit. I will gladly recommend eTrailer to others.
John
12/23/2020
Excellent
by: Philip 11/30/2021
I like the fact that it is adjustable.
Philip
12/1/2022
outstanding
by: Russ F.11/21/2016
I was looking for a hitch for our Ford E 450 shuttle bus. Not have much luck with local hitch installers.( The problem with the E 450 its frame is wider then the F models) I looked at some blogs and found out about etrailer found the 41990-07 hitch. Put it on had a local shop weld up the ends works great! I would highly recommend etrailer they called me to confirm the order and then when the order was shipped very happy with there products!
Thanks !
by: Q Fuller07/15/2019
This was a good purchase, but it ended up too high. The dimensions on this product were clear, but I couldn't decipher the dimensions on the deeper drop products. This one is fine, but if you want to tow a regular trailer behind a tall truck you should probably get a bigger drop on the hitch.
As it is, I'll have to raise the trailer to use this appropriately.
by: Brandon10/10/2021
Needs a few more details included on the website in regards to dimensions. A few detail drawings would help. Would make it a lot easier when trying to decide which and what plates are needed for your specific set-up. In case there are differences for example maybe I have a truck with a service bed but it was fitted after market and it isn't like it would be from the factory.
Sierra K.
10/18/2021
We do have a diagram on the product page but if there were any measurements that were missing that you needed, please let me know and I will have them added. Here is also an expert answer that gives a visual of the hole spacing on the brackets:
Helpful Links
by: Kerri09/18/2022
Excellent service! Super fast shipping and the product was perfect for our Blue Bird Vision School Bus coversion! Thanks etrailer.com!!
by: BC12/06/2022
Solid product, the installation was straight forward.
by: Carl 06/28/2023
works well
by: Andrew 09/11/2021
Hi
I’ve received the hitch but didn’t have time to get it install. Etrailer was very helpful with all the question I have, there support team was great.
THANK YOU
by: Kevin03/29/2019
Very good place to shop got the hitch I wanted for a great price fast delivery nothing to complain about the hitch is already installed and all the accessories that I was looking for that had them in stock fast shipping I give them an a+
by: Dave R.05/24/2017
I have not installed this yet but it is very stout / well made and installation seems very straight forward. This is not the first thing I have purchased from etrailer and it for sure won't be the last. Great selection of products and OUTSTANDING customer service.
by: Jonny 07/17/2021
Worked perfectly on a 3500 mile cross country trip. No issues at all towing an 87 Bronco.
by: Gary 12/29/2021
Great company to deal with. Product was exactly what I needed for a custom installation, easy to install and works well.
by: Robert08/27/2021
The perfect solution for my 2015 Ford Transit converted mini school bus. FYI, the factory hitch will NOT work on these.
by: Benjamin 07/17/2021
Shiped extremely fast. Got here in time and as ordered. Installed it today no problem.i would recommend it.
by: Emmet06/02/2021
super duty and just want i ordered shipped well.
25
109
Show More Reviews
See what our Experts say about this Draw-Tite Heavy Duty Receiver Hitch
- Availability Of Front Mount Trailer Hitch Receiver For 2011 Chevrolet Express Van 3500I do have a possible option for you, but at this time there is not a custom fit front mount trailer hitch receiver confirmed to fit your 2011 Chevrolet Express Van 3500. Instead the only option would be to have a local fabrication shop install a universal hitch like the Draw-Tite # 41990-07 with 7" mounting brackets or the # 41990-16 with 16" mounting brackets to the frame of your van. Both of these options fit vehicles with frames up to 44" wide so you will need to verify your frame does...
view full answer... - Availability Of Trailer Hitch Receiver For 2006 Isuzu NPR and 2006 Chevrolet W-3500I may have another option for you, but the Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2" # c14006 you mentioned is only confirmed to fit select 2014-2019 GMC/Chevrolet 1500 trucks and will not fit your 2006 Chevrolet W-3500 or 2006 Isuzu NPR flatbed. At this time there is not a trailer hitch receiver confirmed to fit either of the vehicles you mentioned Your best bet is to have a local welder install a universal trailer hitch receiver like the Draw-Tite # 41990-07 with 7" tall...
view full answer... - Front Mount Hitch Option for 2005 Chevy Express 3500We don't offer a custom fit front mounted receiver that's compatible with a 2005 Chevy Express 3500, but a weld-on universal hitch like # 41990-07 which offers a 7 inch drop could work for you, but you might need to make some modifications to the fascia under the front bumper.
view full answer... - Front Receiver Hitch For a 2006 Chevrolet Express 3500 Van Chassis Class C MotorhomeThe Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 would allow for you to have a custom welded on hitch for the front of your 2006 Chevrolet Express 3500 Chassis. This can be custom fitted and welded onto your chassis to give you a 2" front receiver. The cross tube for the receiver is 3"x3" and is 44" wide. The included mounting plates will allow for a 7" drop from the frame. Currently there are not any custom fit front receivers for your Express 3500.
view full answer... - Recommended Trailer Hitch Receiver Compatible with 1997 Winnebago Vectra Grand Touring and WD SystemThe Curt Adjustable Trailer Hitch Receiver - 18"-51" Wide - 2" Drop - Class III - 2" # C13701 is a great option for your 1997 Winnebago Vectra Grand Touring. This is rated for 5000 lbs towing capacity without weight distribution or 6000 lbs with a weight distribution system. Your weight distribution system needs to be in the middle range of the system ideally for the total tongue weight. The total tongue weight is the loaded trailer weight along with any cargo weight behind the rear...
view full answer... - Will Curt 14053 Class IV Hitch Fit 1990 Ford E350 Cutaway Chassis Shuttle BusPossibly. The Curt # 14053 Class IV hitch could fit, but it would depend on the vertical height difference between the underside of the van's frame and the lowest portion of the back bumper, which is also known as the drop. You'll need to measure downward from the underside of the van's frame until you clear the bumper. If this distance is less than 2 inches, the Curt # 14053 would fit. If the drop distance is 2 inches or greater, you'll need to go with a weld-on hitch like the Draw-Tite...
view full answer...
- Hitch Option for a 1960 Ford F100We don't have any custom fit hitches confirmed to fit your 1960 Ford F-100, but a multi-fit hitch like the # 41990-07 could possibly work. I'd recommend using a hitch like this or having one professionally fabricated by a qualified welder.
view full answer... - Trailer Hitch Receiver For a 2006 Ford E-450 Bus ChassisYou will need either the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver with 7" Brackets # 41990-07 or # 41990-16 with 16" tall brackets. There is not a custom fit receiver for the 2006 Ford E-450 bus. These receivers will fit a frame up to 44" wide and the bracket height will depend on how far the receiver must hang below the frame to clear any portion of the rear bumper or bus body that you have. The brackets are able to be bolted on or welded to the frame. The Upgraded Heavy...
view full answer... - Which Class IV or Class V Trailer Hitch Receiver For a 2007 Chevrolet SuburbanThere is currently not a Custom Fit Class IV or Class V trailer hitch receiver option for your 2007 Chevrolet Suburban. The only option would be to use a universal receiver like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver - Weld On - Class V - 2" # 41990-07 and have it welded to your frame. Keep in mind that though the Draw-Tite # 41990-07 has a 1600lb maximum tongue and 16000lb maximum trailer weight capacity, you will still be limited to the maximum trailer weight...
view full answer... - Trailer Hitch for 1973 Jeep J4000 Pickup TruckSince there are no custom fit trailer hitches for your 1973 Jeep J4000 Pickup Truck you will want to look at the selection of weld-on truck hitches such as # 41990-07. You will need to determine the overall width of the Jeep frame from outside to outside and the how much space there is from the bottom of the frame down to clear the lower part of the rear bumper. It is possible that hitch # 41990-07 will work for you. This hitch fits frames that are up to 44 inches wide. The brackets are...
view full answer... - Solution for Trailer Hitch Receiver on 2011 Ford E-450 Shuttle BusIn order to add a hitch to your 2011 Ford E-450 Shuttle Bus you need the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. There are no custom fit hitches for your E-450, so a universal weld-on hitch is the only option. This is a Class V hitch that comes with brackets for a 7" drop. The # 41990-16 is also available and comes with 16" brackets. I recommend taking this to a certified welder for installation.
view full answer... - Trailer Hitch Receiver, Wiring Harness and Brake Controller For Thor Bus On 2006 Ford E-450 CutawayFirst the Draw-Tite Ultra Frame Trailer Hitch Receiver # 41945 is designed for the van chassis and not the cutaway chassis. I have included the measurements for the mounting bolts that you can compare to yours to verify the fitment. You will most likely need the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver with either the 7" tall Brackets # 41990-07 or 16" tall Brackets # 41990-16. This can be welded or bolted to the frame. For the trailer wiring you will need the Universal...
view full answer...
- Trailer Hitch Receiver Options for 1963 Volkswagen BusThere may be an option for a trailer hitch receiver for your 1963 VW bus, but there are no bolt-on hitches that will fit this vehicle. The only potential option is a weld-on hitch that can attach to your frame brackets, with the right one depending on the width between the brackets. These hitches have crosstubes which measure either 44" or 62" and install with weld-on brackets that are either 7" tall or 16" tall. - 44" Crosstube: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver...
view full answer... - Dimensions of Curt Trailer Hitch Receiver Part # C15810I reached out to my contact at Curt and was able to get a dimension sheet for the Curt Trailer Hitch Receiver - Class V # C15810 referenced in your question. I have attached an image of it for your review. This trailer hitch is designed to fit select year Ford pickup trucks so may not be compatible with your 2002 FreightLiner. We do not currently offer any custom fit trailer hitches for your vehicle. Another option may be a Weld-On Class V Trailer Hitch like the Draw-Tite Ultra Frame...
view full answer...
- Recommended Hitch for a 2011 Fleetwood Tioga Ranger 24LWe definitely have a hitch that can install on your 2011 Fleetwood Tioga Ranger 24L, but I do need to mention that not all bike racks are rated for use on an RV. This is primarily caused by two factors, the distance between the rear axle of the RV and the receiver, and the stiffer ride typically experienced in RVs. This causes more shaking and jarring than would be experienced when mounted in the receiver on a passenger vehicle. With that out of the way, the Curt Adjustable Trailer Hitch...
view full answer... - Width of Ultra Frame Weld On Class IV Hitch ReceiverI called the manufacturer and part # 41990, will accommodate up to a 44 inch frame. We also have part # 41990-07 and 41990-16 which are both 44 inches wide with different size mounting brackets if these would fit your application.
view full answer... - Solution for Trailer Hitch Receiver on 2006 Bluebird All American FE School BusSince there are no custom fit hitches for your 2006 Bluebird All American FE School Bus you will need to use a universal hitch. I recommend one of the following: -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 (7" brackets) -Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 (16" brackets) The only difference between the 2 is the size of the mounting brackets. Both have a 2" receiver and the same 16,000 lb max trailer capacity fitting frames up...
view full answer... - Will a Trailer Hitch Fit a 2006 Ford E-350 Van with a Knaphiede KUV BodyIf the utility body on your 2006 Ford E-350 van chassis does not sit any lower relative to the frame than on the regular van models you can install a trailer hitch. For example Curt trailer hitch # 14055 will work as long as the bolt holes on the frame where the hitch installs are 38-5/8 inches apart on center. I have linked a video showing an example installation for you. The same goes for hitch # 41945 and # 41906 and a few other hitches for your year E-350 (see link). If the service...
view full answer... - Trailer Hitch Receiver and Wiring for 1990 Toyota Land CruiserI do have a solution, but there are no custom fit hitches for a 1990 Toyota Land Cruiser. What you can use is a universal hitch like the Draw-Tite # 41990-07. This is a weld-on hitch so you will need to take it to a certified welder for installation. I know you asked for a Class III but it won't hurt to have the higher hitch capacity since you will be limited by your vehicle capacity. You will also need a universal wiring kit for the 4-way. The Curt # C59236 comes with everything you need...
view full answer... - Availability of a Front Mount Trailer Hitch For a 2009 Chevrolet Express VanI do have a potential option for you, but there is not a custom fit front mount trailer hitch confirmed to fit your 2009 Chevrolet Express Van. Instead, the only option would be to have a local fabrication shop install a universal hitch like the Draw-Tite # 41990-07 with 7" mounting brackets or the # 41990-16 with 16" mounting brackets to the frame of your van. Both of these options fit vehicles with frames up to 44" wide, so you will need to verify your frame does not exceed this.
view full answer... - Determining The Correct Adjustable-Fit Trailer Hitch For A 1996 Chevy G-30 RV There are weld-on adjustable-fit options available like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07 which come with a much higher GTW capacity like you're wanting, but we'll first need to know the frame width. The frame width is distance from the inside edge of one frame beam to the other. With the 36041 being an adjustable-fit as well I can't say for certain what your actual width is like I could if you had a custom fit trailer hitch receiver. These adjustable-fit...
view full answer... - Front Mounted Trailer Hitch For A 2014 Ram 3500 Cab And Chassis The Curt # C21067 unfortunately does not fit so the only option we can offer would be an adjustable-fit, weld-on trailer hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This comes with a 7" drop or 16" with part # 41990-16 so that you can clear the front fascia.
view full answer... - Recommended Hitch for a 2003 E-450 Shuttle BusYes, there is! To add a hitch to your 2003 E-450 Shuttle Bus, I recommend the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver item # 41990-07. This is a universal hitch that can either be welded or bolted on to your Ford. There are no custom fit options available but we have had many customers install this hitch on E-450s. The Draw-Tite Hitch Receiver item # 41990-07 is a class V hitch with a 2" receiver. It has a massive 16,000 lbs capacity. This one comes with 7" mounting brackets...
view full answer... - Availability Of Front Mount Trailer Hitch Receiver For 1976 GMC K25 PickupI have an option for you, but there is currently not a custom fit front mount trailer hitch receiver confirmed to fit your 1976 GMC K25 Pickup. The only option to install a front mount trailer hitch receiver on your K25 is to use a universal option like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver with 7" tall brackets # 41990-07 or 16" tall brackets # 41990-16. This will give you a 2" receiver allowing you to mount your snow plow. I included a video of the Draw-Tite...
view full answer...
Do you have a question about this Heavy Duty Receiver Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Traci
6/17/2021
It is a blessing. Very good product. Thank you still