Summer Starts Here - Save up to 70%
7" x 1-3/4" Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Mounting flange has 4-bolt pattern. Fits 10" to 13" wheels.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to take a look at the Dexter 7-inch, right-hand passenger side uni-servo hydraulic trailer brake assembly for 2,500 pound axles. Now, this hydraulic drum brake assembly is a uni-servo design, which is used on trailers with surge-type trailer brake actuators. A uni-servo means it's a single plunger design. This design allows about 20% braking in reverse. The size on this assembly is 7-inches by 1 3/4-inches. This one is a passenger side trailer brake assembly.
The size, where they get that size from, is the 7-inches would be the diameter from this shoe to this shoe. If we put a ruler on it, there's your 7-inches. The 1 3/4-inch size is the width of the pad on the shoe, 1 3/4-inches. Again, this is the right-hand passenger side. The way you can tell that, now on all new assemblies it'll have a sticker that'll say right-hand side.
If the sticker wasn't there, the easiest way to tell is look at the size of the pad on the brake shoe. This pad goes from here to here. This one's from here all the way to here, so this is a longer pad, this is a shorter pad. Shorter pad is your primary shoe and that'll always face the front of the trailer, so that'll tell you that this goes on the passenger side. These brake shoes are aligned with an automotive grade friction material. It is fully bonded, it's not riveted inaudible 00:01:13 for a longer life, more braking torque.
It does require period manual adjustments, right down here is your adjustment gear. The backing plate has a nice e-coating 00:01:23 on it for excellent corrosion resistance. This does include the adjuster plug down here. When you go to adjust your brakes, you pop that plug out and put your adjustment tool in there to adjust it. Then you put this plug back in.
The plug is needed because it helps keep dirt from getting into your brake assembly. This does use 7-inch drums. Does include the mounting hardware, the four nuts right here that you install this with. This assembly is certified by USSA standards and the Canadian CSA standards. That should do it for the review on the Dexter 7-inch, right-hand passenger side uni-servo hydraulic trailer brake assembly for 2,500 pound axles.
Average Customer Rating: 4.9 out of 5 stars (20 Customer Reviews)
7" x 1-3/4" Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Mounting flange has 4-bolt pattern. Fits 10" to 13" wheels.Perfect retro fit for old jaco trailer
Purchased complete backing plate, shoes, cylinder, and hardware as a single assembled unit for both sides of trailer. They fit my Jayco trailer, with Dexter axle, perfect. The shoe mounting and return springs are the same as car drum brakes. The original Atwood spring system is very inferior to this replacement unit. Parts were delivered fast and worked perfect. As always, I can count on this Companies great parts and service. Thanks, Ken, from snowy Minnesota.
Installed easily, quality was good. Doesn't come with the stud nuts, glad I could reuse the old ones. Also doesn't come with new adjustment hole plug. These are standard parts with auto brake assembly kits. I would buy this again.
Drum brake assembly is exactly what I needed to replace some old and really worn brakes on a 1982 tent trailer. I was a bit skeptical as to if they would fit as there is no OEM parts out there but it turns out these were perfect!!
Easy direct bolt on installation. Great warranty service.
I ordered a brake assembly for my dexter axle. It was a perfect match. The shipment was promised In two days and I received it in a day and a half. Thanks again
Perfect fit however it does not come with the adjustment plug. My old one was missing so now I have to try to find one locally. Other than that great communication from etrailer and fast shipping. Thank you.
Cheaper than everyone here in Canada, parts are the same ones sold here in Canada
New brakes for 30-foot long Houseboat trailer
Retro fit well on old trailer
Thanks so much for finding this part for me. I had looked everywhere.
Found what I needed, called in to verify. Quick shipping and most important, as described.
Complete, easy to install
Great !!
Worked just like OEM.
They were an exact fit! Perfect.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.