Availability of Replacement Wheel Cylinder for Atwood Hydraulic Brakes
Question:
Hello, Yes I have a Atwood System which everything as Drums, Springs, Shoes are good. With said the Wheel Cylinders are Shot and Rusted shut. It appears I Think you offer a Wheel Cylinder # RH-54-80-4 which I think is for your 7" which Id like to know if it will mount to my Atwood Back Plate and existing Shoes. As mentioned everything else is fine. Anything you can share would be great before I place a order. Thanks
asked by: Harry E
Expert Reply:
As you probably noticed Atwood is no longer in the actuator and brake assembly business so any spare parts are becoming extremely difficult to find. We do not currently have any replacement wheel cylinders that would work with your existing Atwood assemblies. The Dexter RH Wheel Cylinder # 54-80-4 that you referenced would unfortunately not be compatible.
The only option I can offer, and really your best solution, is to replace the brake assemblies themselves. Even though your current units are in working order (other than the wheel cylinder) doing this will ensure availability of replacement parts down the line, not to mention provide you with brand new assemblies that will work great and last a long time.
For 7" x 1-3/4" hydraulic drum brakes the Dexter # 23-398-399 will work perfectly. This kit includes both the Left Hand and Right Hand assembly and is made right here in the USA. You will just need to make sure that their 4 bolt mounting pattern matches what you currently have.
I have attached a short video review that you can check out as well.
Products Referenced in This Question
Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 7" - Left and Right Hand Assemblies - 2.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Manual Adjust
- Single Servo
- 7 x 1-3/4 Inch Drum
- 2500 lbs Axle
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Replacement Right-Hand Uni-Servo Wheel Cylinder Assembly for 7" Brakes - Qty. 1
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- Wheel Cylinder
- 7 Inch
- Uni-Servo
- Dexter
more information >
Product Page this Question was Asked From
Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Right Hand - 2,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 2500 lbs
- Brake Assembly
- Single Servo
- 7 x 1-3/4 Inch Drum
- Dexter
more information >
Continue Researching
- Video: Dexter Axle Trailer Brakes - Hydraulic Drum Brakes - 23-398-399 Review
- Shop: Dexter Hydraulic Trailer Brake Kit - Uni-Servo - 7" - Left and Right Hand Assemblies - 2.5K
- Q&A: Replacement Hydraulic Brakes for Pop-Up Camper
- Q&A: Replacement Al Ko 10k Brake Calipers and Brake Pad Recommendation
- Q&A: Availability of Brake Line Fitting to go from 1/8 inch Male NPT to 3/16 Female FIF
- Q&A: How to Make Fulton A60 Swinging Coupler Compatible with Disc Brakes
- Article: How to Measure for Trailer Hitch Drop
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Recommended Hitch and Adapters for Ram OEM Puck System on Short and Long Bed Trucks
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Q&A: Correct Replacement for Atwood 7" x 1-3/4" Hydraulic Drum Brakes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: 5 Things to Know About Weight Distribution Hitches