Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace the brake shoes and lining on your 7" diameter x 1-1/4" thick electric trailer brake assembly. Fits brakes designed for 2,000-lb axles. Includes hold-down clips.
Features:
Each shoe is lined with automotive-grade friction material for improved stopping performance and longevity. The friction material is fully bonded onto the surface of the brake shoe. This lining is custom-molded for a perfect fit. The edges are tapered to ensure long-lasting performance. This taper, along with the circular grinding that the lining undergoes, helps to prevent cracking and crumbling. This durability helps to prevent mechanical lockup, which can occur when brake shoes are excessively worn or broken.
The friction material is also SAE-N certified, which means that it is an environmentally safe product that complies with California and Washington regulations regarding the composition of brake pads. As a result, this material not only provides high-performance braking that can endure the test of time, but it is also environmentally friendly and safe for use throughout the United States and Canada.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the replacement electric trailer brake shoes and lining kit for the 7 inch brake assembly on 2,000 pound axles. Now this part is for a quantity of 1 wheel. The part will include everything shown here on the table, the 2 shoes, the 2 hold down clips, now these brake shoes and linings are for electric trailer brakes that are on 2,000 pound axles. Now when these are installed they would measure across 7 inches, and then the width of the pad is 1 1/4 inch. Brake assemblies, when they're listed they're give the size of the brake assemble, and the size basically means that if you measured, once these are installed on your assembly, if you measured straight across the diameter, it would measure 7 1/4 inches when they're installed. Then the width of the pad would be the 1 1/4 inches.
That's how they determine the size of the brake assemblies. Now this does include the primary shoe, and the secondary shoe, and the way you can tell the difference on that, if you look at the size of the pad, you can see this pad is a little bit smaller than this pad. This one is a lot longer. The primary shoe will always point toward the front of the trailer, so when you do install these you want to make sure the primary shoe goes towards the front of the trailer and the secondary shoe, which is the larger, would point toward the rear of the trailer. Now these parts are certified for SAE standards and CSA standards. The CSA standards are the Canadian standards.
When these are installed these are designed to be used with 7 inch drums. That should do it for the review of the replacement electric brake shoe and lining kit for 7 inch brake assembly on 2,000 pound axles.
Average Customer Rating: 4.9 out of 5 stars (14 Customer Reviews)
Replace the brake shoes and lining on your 7" diameter x 1-1/4" thick electric trailer brake assembly. Fits brakes designed for 2,000-lb axles. Includes hold-down clips.
First of all, etrailer is one of the few companies that asks for reviews long after the purchase, presumably to ensure customer satisfaction and get accurate information regarding their parts' longevity. The replacement brake shoes I ordered were to replace the (electrically-operated) shoes that got soaked with grease from the installment of Bearing-Buddy-type automatic grease fittings I installed (thinking I would save time and effort). (DON'T DO IT! It just pushes grease onto the brake shoes, rendering them essentially useless and irreparable.) As for the parts themselves, they fit perfectly and arrived on-time as I remember. While the parts have less than 1k miles on them, there have been no problems with these parts at all. In fact, I've never had issues with any parts from etrailer. Their reputation is quite high in my opinion.
Product was an exact fit, speedy delivery too. Thank you.
These worked great to rebuild the Dexter brakes in my camper. etrailer had the right parts, at the right price, and fast delivery too! Thank you.
Exactly like the ones I took off which had overheated, except the new ones had good shoes! All the right holes in all the right places.
Shoes shipped as promised. I ordered wrong shoes. Returned and received correct shoes for my camper. There whole team excellent. Will always use and recommend etrailer.com
A perfect replacement on an older trailer !
Exact fit the only down side is that one set of brake shoes does one side of the axle so if you have 2 axles you need 4 sets of brake shoes.
good service and product
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gordon
6/15/2023
Still no problems! After several hundred miles, the brake shoes are working as designed. Thanks for asking, eTrailer youre one of the few businesses that ask for reviews long after the purchase.