Hub and Drum and Bearing Kit to go with 7 x 1-3/4 Inch Hydraulic Brake Assembly 23-399
Question:
I was just reading your answer to this same question from another person and was wondering where he got the 1.63 diameter in the middle? I have ordered these to replace my old atwoods and am just making sure I ordered the right thing. My holes are 2 and 7/8 apart but i cant seem to find the 1.63 diameter anywhere. Also, do you guys sell the drums that go over these assemblies? Thank you for the help Also, what bearing kit fits these assemblies. I ordered the b1-150 i think. Thanks
asked by: Scott R
Helpful Expert Reply:
I believe that in the question you are referring to the 1.64 measurement is on the brake mounting flange, # 4-34. The center hole of the brake assembly, # 23-399, is larger than this and that is normal so it doesn't sound like you have anything to worry about for that. The matching left hand brake assembly is # 23-398.
For a hub and drum assembly you can use # 8-276-5 which has a 4 on 4 bolt pattern and you would use bearing kit # BK1-150. For a 5 on 4-1/2 bolt pattern you can use hub and drum # 8-271-7UC3-EZ which includes the bearings, races, and seal.
Products Referenced in This Question
Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Left Hand - 2,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 2500 lbs
- Brake Assembly
- Single Servo
- 7 x 1-3/4 Inch Drum
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for Hydraulic Brakes - 2,000-lb E-Z Lube Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- Dexter
more information >
Trailer 4 on 4 Hub & Drum Assembly - 2,200 lbs. Axles - Hydraulic Brakes
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 7" - Right Hand - 2,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- RH
- 2500 lbs
- Brake Assembly
- Single Servo
- 7 x 1-3/4 Inch Drum
- Dexter
more information >
Continue Researching
- Q&A: Replacement Hub/Drum and Hydraulic Brake Assembly for Boat Trailer With 3,500 lb Axle and 13" Wheels
- Q&A: Availability of Brake Line Fitting to go from 1/8 inch Male NPT to 3/16 Female FIF
- Q&A: How to Make Fulton A60 Swinging Coupler Compatible with Disc Brakes
- Q&A: Can Surge Brake Actuator Rated for Two Brake Axles Work with One Axle
- Q&A: What Is The Bolt Pattern Of The Brake Mounting Bolts On Dexter Brake Kit 23-398-399?
- Q&A: Recommended Hitch and Adapters for Ram OEM Puck System on Short and Long Bed Trucks
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Article: How to Measure for Trailer Hitch Drop
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: 5 Things to Know About Weight Distribution Hitches