Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
10" x 2-1/4" Driver's-side and passenger's-side hydraulic trailer brake assemblies feature a single-plunger design. Mounting flanges have a 4-bolt pattern. Fit 14" to 15" wheels.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Dexter 10" Uni-Servo Hydraulic Trailer Brake Kit. It's a left- and right-hand side assembly for 3500 pound axles. These are hydraulic drum brake assemblies, they're designed for use with surge-type trailer brake actuators. These assemblies are a Uni-Servo which is a single plunger design, and they are manual adjustment brakes so they do require periodic manual adjustment. Right down here is your adjustment gear. Now, it does come with the left-hand driver's side and the right-hand passenger's side brake assembly. The bolts are included to mount it, and the mounting nuts are also included.
And the other nice thing is they include the rubber adjuster plugs right here, and what those do is they cover the access holes here. Those holes are used to adjust your brake gear right here. So when you're done adjusting it you put the plugs back in and it's nice because it will keep any dirt and grime out of your assemblies and off your brake shoes. A few specs on this. The size on these brake assemblies are 10" by 2-1/4", and that measurement, the 10" would be the diameter, which is measured from this shoe to this shoe. So if we put a ruler on that there's your 10" diameter.
And the 2-1/4 would be the width of the pad on the shoe, so there's 2-1/4" wide. And as you can see, this is a four bolt pattern so it does require a brake mounting flange of four bolts. And it does require the use of 10" brake drums. The wheel size used on these is 13", 14" and 15". The axle rating again is 3500 pound axles. And the last thing I just want to mention to you is that when you do receive these brand new they will have a sticker that will say right-hand or left-hand, but just to let you know if the sticker wasn't here the easiest way to tell is just look at the length of the pad on the shoe.
So if you look at this pad it goes from here to here. And on this shoe it goes from here to here. This is the longer pad, this is the shorter pad. The shorter pad is the primary shoe and that always faces the front of the trailer, so that'll tell you that this is for the right-hand passenger side. And if you look at the other one, here's the shorter pad, here's the longer pad, so that's for your left-hand driver's side. But that should do it for the review on the Dexter 10" Uni-Servo Hydraulic Trailer Brake Kit with the left- and right-hand side brake assemblies for 3500 pound axles..
Average Customer Rating: 5.0 out of 5 stars (25 Customer Reviews)
10" x 2-1/4" Driver's-side and passenger's-side hydraulic trailer brake assemblies feature a single-plunger design. Mounting flanges have a 4-bolt pattern. Fit 14" to 15" wheels.I needed to replace my trailer brakes at the lake because I didn't have time to do it before I left. I ordered on a Saturday night, it shipped on Sunday, and I received it on Wednesday. Outstanding shipping service!
Great fitment and great price.
Steven at etrailer hooked me up. They should build a statue of this man!!
Excellent product. Bolted right up, still working fine after 1 year. Easier and cheaper than cleaning and replacing brake shoes and brake cylinders. Brake shoes were pre-adjusted!
Looks like exactly what I wanted. Waiting for the snow to melt so I can install. I didn't need the extra bolts or grease caps because they were included in the backing plate and drum packages. No problem it's good to have spares. Thanks
P.S. The box with the money must have been misplaced!! HaHa
Thanks for all your help Angela
Everything looks great. And even early delivery. The left hand break is missing one of the 4 mounting bolts. It is a pressed in bolt that is missing. I d have all the nuts.
These make changing your trailer brakes a breeze!! Thank you for the quick shipment and very easy transaction!
These brake assembly arrived fast and they're exactly what I needed for my boat trailer. THANKS!
Great products and support is excellent. Complete purchasing process was excellent!
The correct parts and pieces, arrived ready to install. It gets no simpler!
Made in USA and great quality!
Went together perfectly! Couldn’t have asked for any better.
fast shipping good product
Works fine!
Product worked perfectly
Quick delivery ! Love it !!!
Exactly What I wanted
Fast shipping.
well packed and fast shipping
Do you have a question about this Trailer Brake?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina B.
4/8/2022
I have sent this over to our customer service department to better assist you.