Videos
for Vision X
Help Articles
for Vision X
Expert Answers
for Vision X
This light bar is designed to attach to the included mounting bracket, which attaches to existing holes in your vehicle. The Putco High Power Luminix Off-Road Light Bar w License Plate Mount is intended to be installed either way, with the light…
view full answer...By other dimensions I assume you are referencing the wheel bolt pattern for your 15 inch trailer wheel, and I have added a link below to a help article on how to find the correct bolt pattern. For a 15 inch wheel you likely have either a 5 on…
view full answer...The side camera (or any of your cameras) can be paired with more than one monitor but not at the same time. You cannot pair your camera(s) to both your 7 inch and your 5 inch monitors. It's basically the same concept as trying to pair two…
view full answer...With the 1/2 inch diameter wheel studs on your etrailer.com Idler Hub Assemblies #AKIHUB-545-35-K and the 15 inch steel wheels from the Loadstar Tire and Wheel #AM3S640DX, you are looking at a torque spec of 90-120 ft.-lbs for the lug nuts. I have…
view full answer...The marker and clearance lights you have now ground with a single wire hence why you have two wires total, one for power and one for ground. If the marker or clearance light only has one wire then this wire is for power and the light grounds though…
view full answer...The Pack'em Ladder Rack #PK-28WL2-BMH towers are made of a heavier steel due to it having limited mounting points to fit on a utility trailer. This is why the steel is heavier to better support the weight of the accessories being carried. This…
view full answer...You can use the Yakima TopGrip Paddle, Shovel, or Axe Holder Brackets for Roof Rack Crossbars - Universal Mount #Y04086 to attach your paddles to the crossbars on your Malone MicroSport Trailer with J-Style Carriers for 4 Kayaks - 800 lbs #MPG462G2.…
view full answer...The clamps for the old Thule XT fairings have been discontinued, and there are no adapters that are designed to work with your Malone AirFlow2 Roof Rack #MPG216 with 58" crossbars, so the best option really is a new wind fairing. I recommend…
view full answer...The trailer wiring would have to be either a 5-way or 7-way as those are common styles that have the reverse light circuit available. It would just be a matter of running that circuit from the trailer wiring connector to the power wire of the light…
view full answer...The Vision X Utility Market Floodlight #XIL-UF32 that you referenced is waterproof and puts out 500 lumens so it would do an excellent job as a reverse light.
view full answer...From the center of the pipe mount to the top of the etrailer jack #TJP-2002-Z measures 4-1/4 inches.
view full answer...When the Pipe Mount Swivel Style Trailer Jack with Foot - Topwind - 15" Travel - 2,000 lbs. #DL22682 is fully extended the distance from the center of the weld-on spud to the foot is 29-3/4 inches. When this is fully retracted the distance is…
view full answer...
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."