Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
4-1/8" x 1-1/4" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Surface mount with bracket. Single wire grounds through mounting hardware. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Surface-mount trailer lights install using a flange or bracket with mounting holes. These lights lay flat against the trailer surface and only require a small, often pre-existing hole, for wiring. Mounting hardware is used to secure the light to the trailer.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (1363 Customer Reviews)
4-1/8" x 1-1/4" Rectangle. Waterproof, LED trailer light serves as either a side marker light or clearance light. Durable polycarbonate housing and lens. Surface mount with bracket. Single wire grounds through mounting hardware. P2 rated.These were a great replacement for my old fluorescents on the sides of my boat trailer while I was pulling new wires and replacing rear lights as well. They are plenty bright and easy install.
Perfect!! Holes lined up exactly as specified which was VERY important for my application. I didn't have to drill any holes and they work exactly as expected.
These lights went in nicely and have proven to be reliable. Thank you.
Wish this was the 2 wire variety. Still works, but keeping them grounded is a pain.
They worked out perfect as a replacement to my old lights. Had to do a little bit of customization to fit them to my trailer but I expected that I would. They look great and give off some nice light. I would for sure buy them again.
Robert B.
3/28/2022
After a year of solid use my lights are still looking great on my trailer! Would certainly buy them again and definitely reccomend them to everyone!
Folks, I decided to completely revitalize/upgrade my 20 year old bass boat trailer and found that not only could i find all the updated parts i needed, (led lights and urethane bow rollers, etc), at one location, additionally itrailer.com has a video for just about each part, where they share different measurements etc that may not be on the standard part description. These videos provided me with all the information i needed while configuring my retrofit. Additionally, when I placed my order, I received a personal email from the guy who packed my shipment., confirming that all the parts i ordered where in stock and now on the way. I typically never write these type of endorsements, but I felt compelled to write this one. Great service and all the parts I purchased have met my expectations. I'll be back when I need additional trailer parts.
I prefer lights that don't need an additional grounding wire. These have a metal bracket on them so when you mount them with your bolt or screw, it grounds the light. Pretty bright light, zero complaints. However I will say i was surprised they don't come with any bolt/nuts or screws. For me that was no big deal since i have both on hand, ended up using some self tapping pan head screws that were zinc plated. To lazy to get the drill set out.. I cut the tip of the connector off and ended up using a heat shrink crimp connector.
Again a perfect fit for our Haulmark cargo trailer. These are the OEM equivalent with LED lighting. I installed a white 14 gauge pig-tail wire for extra grounding purposes and they work great. I would buy them again, so thanks again etrailer......
This is a good replacement for my boat trailer markers...didn't even have to drill new holes.
Brian R.
2/26/2020
still working
Great price and worked good. Wished could have found the light cheaper without black adapter. Rest of trailer is gray.
Laura E.
12/7/2016
Thanks for the review, Phil! I have a solution for you! You can replace the black bracket with the Optronics chrome bracket A67CB, or the gray bracket A66pb. This part would better match your trailer. Hope this helps!
Phil S.
1/2/2018
Working great. As stated wish could have found just the light. Black adapter not being utilized.
I recently replaced my trailer lights with the thinline LED's. I like that they are completely sealed and they're very bright for the size.
Replaced DZ part # 77-825 with these new led lights on my 1981 Avion camper. Looks and works great! Video of product mounting was very helpful in choosing these lights. One of the best websites I’ve ever come across. Thanks for the help from your team!
Going to be a good replacement for the light I had on my trailer.
Dave
5/29/2022
Working as it should happy I found it:
Easy install, just 2 #10 x 3/4" bolts. It's self grounding. Well made, bright, and a simple snap in lens if it should burn out or get cracked.
I would suggest cutting the wire off your existing light and splice it to the black wire. The black wire is a bit short if you are trying to splice directly to your main wiring. I know from experience.
I replaced all my original bulbs with these LED. Trailer lights up real nice at night now..
Easy to install, bright LED's, great replacement for my old incandescent fixtures.
Jw
11/10/2019
Slill working flawlessly after one year
wish pig tail on light was a little longer had to use a jumper wire to make connection to trailer wire. Other then that their going to work.
I needed a replacement running light for a trailer. This one worked great as a replacement.
It works lime its supposed to. Ga e it a lower rating because the housing on 3 out of 7 were cracked when I opened them. Didn't have to time go through all the BS with return and waiting for new ones, they all work bit for how long Idk.
I ordered replacement LED lights for a trailer I have . The web site was clear and easy to navigate prices are fair and delivery was prompt. What more can I say?
Great service The LEDS look better than old lights. Easy install
These are very good led lights. Highly visible at night and during the day. Replaced the missing light perfectly.
Have had these lights on my trailer for a year now. Still working good. Using the trailer about once a week now. Really show up at night.
Excellent customer service, lights look to be great quality, and you cannot beat the price. Will shop here again.
Great product but even better customer service. etrailer is now my go to spot for all my trailer needs.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Eric
6/6/2023
Same opinion. Never worked out the wiring and just called it good.