Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - Rectangle - Amber Lens
(204 reviews)
Price: $3.22
In Stock
Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - Rectangle - Amber Lens
Item # MC44AB
Retail:$13.51
Our Price: $3.22
You Save: 76%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (204)
- Q & A (0)
- Photos
Optronics Trailer Lights - MC44AB
- Clearance Lights
- Rectangle
- Incandescent Light
- Amber
- 4L x 1-1/2W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Optronics
4" x 1-1/2". Incandescent trailer light serves as either a side marker light or clearance light when properly mounted. Built-in reflex reflector. Snap-on lens. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.
Features:
- Incandescent trailer light functions as a clearance light or side marker light when properly mounted
- Built-in reflex reflector removes the need for a separate reflector
- Incandescent bulb can be easily replaced
- Durable ABS housing with snap-on lens
- Amber lens over incandescent bulb
- Compatible with 12V DC systems
- Surface mount to trailer - hardware not included
- 2-Wire design includes power lead and ground wire
- P2 rated
Specs:
- Dimensions: 4" wide x 1-1/2" tall x 15/16" thick
- Distance between mounting holes (center on center): 3"
- Bulb type: 194
- Power draw at 12.8V: 0.4 amps
- 3-Year warranty
Manufacturer Cross Reference
Light will work as an exact replacement for:
Bargman # 30-99-002
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MC44AB Optronics Clearance or Side Marker Trailer Light w/ Reflector - Incandescent - Rectangle - Red Lens - P2 Rated - 2 Wire
Alternate part number: MC-44AB
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
Customer Reviews
Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - Rectangle - Amber Lens - MC44AB
Average Customer Rating: 4.8 out of 5 stars (203 Customer Reviews)
4" x 1-1/2". Incandescent trailer light serves as either a side marker light or clearance light when properly mounted. Built-in reflex reflector. Snap-on lens. Surface mount to trailer - hardware not included. 2-Wire design. P2 rated.by: Jim09/22/2023
I needed these as a replacement for a marker lens on my motorhome after having a moment in an eternal construction zone. The words say incandescent, but I can see the LEDs that replaced it. I am glad for that as it's better than I expected, but you need to update your description. I've attached a photo of the marker light. Thanks, there is no complaint here, just info.
by: Michael 02/03/2024
These were an exact replacement for our 2004 Winnebago class A Motorhome. Perfect fit and look awesome
by: Richard 04/21/2024
Easy and quick delivery and install. Just what I needed. Description on website was accurate.
by: Michael09/25/2023
Told sales person the vehicle i was working on and wrong marker lights were shipped to me. When i made an effort to return and replace was told i ordered it that way. Not worth the return but still had to purchase the right ones. Poor customer relationship. Will defiantly consider other options in the future. You should have made it right.
by: Jerry F.06/12/2018
I recently purchased clearance light assemblies for my 2006 Winnebago Class "A" Motorhome. Winnebago parts handlers that I contacted told me that they were obsolete, and couldn't be purchased anymore. I then contacted eTrailer as I have done business with them in the past when looking for Motorhome parts. They had the exact replacement parts that I was looking for, and at a reasonable price. They shipped my product within a day of ordering and kept me updated on the delivery of it. From now on, eTrailer will be my first go to when I need parts.
by: Kerry 07/18/2023
The clearance light are made well but the ones I received the lens were extremely hard to remove. I actually cracked one lens trying to remove it from the base. I ended up using a plastic trim remover to separate the lens from the base which was better than a flat tip screwdriver. I will definitely buy again when I need to.
by: Guy03/23/2024
Fit and function were great
by: Lisa 04/16/2024
Just as ordered ,packed well.
by: Leo 02/13/2024
the right product and the a price. Fast delivery, too.
by: Taco10/28/2023
Just what the trailer ordered :)
by: Rick 02/10/2024
very bright, easy to install, fast ship ping.
by: Lyn 03/23/2024
Looks like they should work. Thank you.
by: Kurt 08/18/2023
Thanks for sending these marker lights. They are just what I ordered and perfectly match the other ones I have.
by: Hans 02/03/2024
Great Lights.
by: Mike B09/18/2017
These were exact replacement for the running lights on my 1994 Winnebago.
by: Magdalena11/11/2023
They were exactly what I needed. Easy to install. I will be ordering more to replace other old lights.
by: Richard 12/08/2023
The item was exactly what I needed Thank you
by: James07/07/2023
It has a ground wire attached which I n eeded.
by: Robert07/21/2023
They shipped two lenses instead of two light assemblies.
Jenny N.
7/25/2023
Sometimes we do make a mistake. I am sorry that the wrong part was sent. I will have our Customer Service team reach out to you.
by: Pete from Massachusetts09/20/2015
Needed to replace marker lights on my enclosed trailer. New lights fit perfect and were easy to install. Great quality and very well priced. Thanks etrailer.
Pete M.
9/21/2016
Performing and holding up great.
by: Daniel11/30/2022
It is not incandescent, it is led. It is also not the advertised dimensions. But, it will probably work
Jenny N.
12/1/2022
This is definitely meant to be an incandescent light. Customer Service will be in touch to help.
by: Buck06/18/2014
To install these Lights I needed to do it a little different than how the old lights were wired but after the installation these lights work very well.
IE: I needed to use butt connectors instead of simply taking my existing wires and sliping them into the light, which took more time for the installation part.
My trailer now has ALL functioning running lights once again, at a good price.
by: Charlie01/13/2017
Found this company on the website, They had just what I was looking for and a Whole lot more, I wanted to add more lighting to my trailer and wanted to keep all the lights the same, I did my shopping on line which was very easy to do, I placed my order, received an email with tracking information, Received my parts very quickly, would definitely recommend them to anyone. They have a Great selection of parts for just about anything, and the Prices are very reasonable. Looking forward to doing business again, Thank you etrailer!
by: Bobby 05/30/2023
Perfect fit and easy to install
25
203
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Replacement Housings For The GloLight 118a And 117r Trailer Clearance LightsWe have both the replacement lens and assemblies for the GloLight 118a and GloLight 117r trailer clearance lights. They are available in both an incandescent part # MC44AB and an LED part # MCL44AB1 bulb for the amber lights. For the red lights, you will need part # MC44RB for the incandescent bulbs and part # MCL44RB for the LED version. The replacement lens assemblies for the amber housings is part # A44AB whereas the replacement lens for the red housings is part # A44RB.
view full answer... - Replacement Marker and Clearance Lights For Globrite 118A/117R On a 2004 Haulmark TrailerYou are going to have to replace your running lights on your 200 Haulmark Trailer as I do not see that there are any replacement lenses available for your Globrite 118A/117R clearance/marker lights. The Optronics Trailer Clearance or Side Marker Light w/ Reflex Reflector Red # MC44RB and Amber # MC44AB appear to be the same size as the Globrite lights. These are 4" long X 1-1/2" wide. We do carry the Replacement Bulb # A194B, Red Lens # A44RB and Amber Lens # A44AB for these lights...
view full answer... - Replacement Trailer Clearance Light Lens Recommendation for J. Odell Enclosed TrailerThe great thing about trailer lighting is that most brands all make the same versions of the same lights. So if what you have looks like a # MC44AB and the dimensions match (4" W x 1-1/2" H), this would be what you have. Then for a replacement lens you'd want the part # A44AB.
view full answer... - Mounting Hole Spacing For Side Marker/Clearance Lights MC68 and MC44The Optronics Clearance or Side Marker Trailer Light # MC68AB and # MC68RB have a mounting hole spacing of 2-3/4" for the hole centers and are centered horizontally and vertically in the mounting plate. The Trailer Clearance or Side Marker Light w/ Reflector # MC44AB and # MC44RB have a mounting hole spacing of 3" for the hole centers and are centered horizontally and vertically in the mounting plate.
view full answer...
- What is Difference Between Optronics Clearance Lights MC44AB and MC44ASThey are totally different designs. The clearance light part # MC44AB has more of a round face and the other light which we don't carry has a flat face.
view full answer... - Amber Trailer Side Marker Running Light that Measures 4 L by 1-1/2 W by 15/16 DYou sure can. The amber side market light that matches the red, part # MC44RB, is part # MC44AB. They're both 4 by 1-1/2 inches with 3 inch, on center, mounting holes. We also just carry the amber lens, part # A44AB.
view full answer... - Replacement Lenses and Light Assemblies for Glo-Brite 118A/117R The Glo-Brite 118A is the amber light and for the lens you need # A44AB while the light assemblies are the Optronics # MC44AB. For a Glo-Brite 117R, which is the red light, you need replacement lens # A44RB and light # MC44RB. We do not carry Glo-Brite products so while Optronics has previously confirmed for us the lenses will snap into the Glo-Brite light housing the light assemblies themselves are 2-wire lights and not 3-wire lights like Glo-Brite.
view full answer... - Replacement Amber Lens for 4 Inch Wide Trailer Clearance LightsIf you can provide me with a photo that lists the length, width, and height of the replacement lens you are looking for I would be able to offer a better recommendation for you but based off of the above information, we have part # A32AB which is an oval amber replacement lens or part # A44AB which is a rectangular amber replacement lens. Both of the above lens measure 4" wide. The oval amber lens is designed for part # MC32AB and the rectangular lens is designed for part # MC44AB.
view full answer... - Replacement Bulb For A Bargman #99 Clearance Light I have just the replacement bulb for your Bargman #99 clearance lights! The Replacement Side Marker Light Bulb # 194 # A194B. These lights are sold individually so make sure to adjust the number of bulbs you will need for your trailer. I attached a review video link below.
view full answer... - Recommended Replacement for Glo Brite 126R/126Y Side Marker LightsThe Optronics Trailer Clearance or Side Marker Light part # MC44RB for red or part # MC44AB for amber work great to replace the old discontinued Glo Brite 126R/126Y. They are not the exact same but very similar in design and dimensions. They feature a very simple two wire install.
view full answer... - Glo Brite 118A/117R LED Bulb ReplacementThe bulb type of the Glo Brite 118A/117R you have is a 194 so for an LED you'd just want the # DI88VR.
view full answer... - Recommended Replacement Lens or Light Assembly for GloBrite 126R/126Y Amber Marker LightI may have a solution for you, but Glo-Brite has since gone out of business, so replacement lenses that are guaranteed to fit are no longer available. With that said it certainly looks like your Glo-Brite 126y is very similar in shape and size (4"x1-1/2") to the Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - Rectangle - Amber Lens # MC44AB and the replacement lens for that light is the Replacement Amber Lens for MC44 Series and BA44 Series Trailer Lights # A44AB. I...
view full answer...
- Availability of Incandescent Version of Optronics # MCL44AB1 LED Trailer Clearance/Side Marker LampThe incandescent version of the # MCL44AB1 lamp you mentioned is part # MC44AB. The lamp measures 4 by 1-1/2 inches and mounts on 3 inch centers. The lamp is a two wire design, one wire for power, the other for ground. This differs a bit from the LED version that grounds through its mounting hardware.
view full answer... - Recommended Replacement Side Marker Lights For 2004 Winnebago Itasca SunovaWe do have replacement lights for the Glo Bright 118A and 117R lights you have on your Winnebago Itasca. If the lights you have use incandescent bulbs, the replacement light you need for the amber light 118A, is part # MC44AB. This light measures 4 inches long and 1-1/2 inches wide and is 15/16 inches tall, and the mounting holes are spaced 3 inches center to center. The replacement bulb for this light is part # A194B. For the 117R light replacement is part # MC44RB. It has the same...
view full answer... - Replacement Trailer Clearance Lights for Bargman 99 SeriesThe correct replacement trailer clearance light for a Bargman 99 Series is the Optronics Trailer Clearance or Side Marker Light part # MC44RB for red or part # MC44AB or amber. The mounting holes for this light are spaced 3" apart on center. It features a simple two wire installation, one for power and one for ground. In order to remove the old lights it would be easiest to just drill out the rivets with a small drill bit. The drilled holes would then make good pilots for the self tapping...
view full answer... - Recommended 44 Series Clearance Trailer Lights We do have the lights you are looking for. I have attached a link to our product page for the 44 series lights we carry. If you are looking for a Red clearance light you can use part # MC44RB. This light measures 4 inches long, 1-1/2 inches wide, and 15/16 inches deep. The mounting holes are spaced 3 inches apart. For an Amber 44 series clearance light you can use part # MC44AB.
view full answer... - Replacement Amber Light for Broken Lens on Old Horse TrailerUnfortunately we don't have anything in that particular size. I recommend replacing the light with the Trailer Clearance or Side Marker Light w/ Reflector - Incandescent - Rectangle - Amber Lens # MC44AB which is slightly bigger at 4 by 1-1/2 so you won't have any exposed holes. The mounting holes are 3 inches on center.
view full answer... - Replacement Lenses and Lights for Glo-Brite 118A/117RFor your Glo-Brite 118A amber light the replacement lens that will fit is the Optronics # A44AB; the lights themselves are the Optronics # MC44AB. The Glo-Brite 117R can use replacement lens # A44RB while the light is # MC44RB. I've added links to video reviews of the lights for you to check out as well.
view full answer... - Do fenders Come with Cutouts for Amber Marker LightsThe fenders that we sell, like the Fulton Single Axle Trailer Fender with Top and Side Steps # F008574 you're looking at, are shipped out as-is and don't have pre-made cutouts for the lights. Instead of making a whole cutout in the fender you can pick up a surface-mount side marker light, like part # MC44AB, and just cut provisions for the wiring and mounting hardware.
view full answer... - Replacement 4 Long Amber Clearance Light for Cargo TrailerIt looks like you will need the Trailer Clearance or Side Marker Light w/ Reflector part # MC44AB which comes with a new base, bulb, and lens. You'll want a new assembly so you can be sure you have the correct fit but swapping the lights is very easy, just a few screws and wires.
view full answer...
- Availability of Replacement Trailer Light for Glo Brite Lights 118aFor the same size light, we have the Rectangular Trailer Clearance, Side Marker Light with Reflector, 2 Wire - Amber # MC44AB or the LED version with 6 diodes # MCL44AB. These will both be 4 inches long by 1-1/2 inches wide with 3 inch on center mounting holes. For red you'd need the part # MC44RB.
view full answer... - Correct Replacement for Glo Brite Marker Lights 118A and 117RThe correct replacements we offer for the Glo Brite Marker Lights 118A and 117R is the Trailer Clearance or Side Marker Light part # MC44AB for amber and part # MC44RB for red.
view full answer... - Replacement Amber Light For Brite Glo 118A/117RFor the same size light, we have the Rectangular Trailer Clearance, Side Marker Light with Reflector, 2 Wire - Amber # MC44AB or the LED version with 6 diodes # MCL44AB. These will both be 4 inches long by 1-1/2 inches wide with 3 inch on center mounting holes.
view full answer... - Is Optronics Trailer Clearance Light # MC44AB Same as Winnebago 111102-02-000Yes, the Optronics trailer clearance light part # MC44AB is the same as the Winnebago 111102-02-000 clearance light.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Installed by:
Kathleen M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
9/30/2023
It looks like you have received part # MCL44AB by mistake. I am glad you are happy with it! If you want to swap for the incandescent please feel free to let us know.