Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-1/2" x 1-1/8". Waterproof, LED trailer light serves as either a side marker light or a clearance light. Built-in miro-flex reflector. Durable polycarbonate lens and housing. Surface mount. Accepts standard 1-wire or 2-wire plug.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the internal components.
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1715 Customer Reviews)
2-1/2" x 1-1/8". Waterproof, LED trailer light serves as either a side marker light or a clearance light. Built-in miro-flex reflector. Durable polycarbonate lens and housing. Surface mount. Accepts standard 1-wire or 2-wire plug.Nice light, but didn't know I had to buy a mount and plug to fit the back of the light when I bought it.
The lights look and work great! Super customer support from George too! What a nice change from my old bulb lights.
Here are some day and night pics. I have a short vid of a turn light blinking, but the site won't let me upload vids.
Fit exactly as expected. These are quite robust and bright. NOTE, this is only the lens and not the frame.
Bright light, easy to attach with the recommended pigtail connectors.
The lights and brackets arrived nicely-packed, and worked on my boat trailer as intended as intended. Check the original mounting holes. The mounting holes for the new light bar were located in different positions, than the damaged light bar I replaced, so a drill and bits, and zinc spray paint might be necessary. I also used stainless steel screws, instead of the supplied screws.
I found those to be junk and didn’t use them as lights. I made due with my old ones and glued the reflector lens of your marker lights to the side of the trailer as reflectors.
I like the light, I just wish you prompted me to buy the grommet which is why i deducted a star. I had to place a second order and now I have to wait again to install. Overall it was a good experience. Would have been perfect if I was promoted though
I am happy with the product and the shipping was awesome it arrived a day early thank you etrailer. I was so excited that I told my friends my package arrived early thank you..
Very nice light. Really bright goes well with the red clearance lights and tail lights with the same style led
Very bright lights and look ten times better than the old incandescent lights I had on my boat trailer. Excellent service from etrailer as always.
I had a couple a91 lights out on my trailer. These were a direct fit replacement. The al191 is much brighter.
Lights were installed easily and are much brighter than the original lights.
I purchased these to replace some older LED marker lights that had started to corrode on the back side. These are much brighter than the set they are replacing. They look great.
super bright side marker lights great improvement over old bulbs
Products delivered exactly as promised and advertised. Excellent support and service. Will be installing lights in the next few days.
great side marker light. easy to instal l.
I like LED’s that are bright! With 3 LED’s vs. most competitors having 1 per light, these are my favorite.
Did not get to use. Wife through them away by accident.
As always the employees at etrailer answered all my questions and even offered a better solution to my issue that was less money. everything arrived on time and as promised. it is a pleasure doing business with them
Everything went very smoothly. Website very user friendly. The dimensions of lights on the website very helpful with matching my old lights for new LED ones. Fast shipping as well.
The lights were exactly as described. Katie found the right matching pair and at a much better price than found elsewhere. Shipping was fast.
The lights fit in the holes that were already there and the lights work as advertised.
Exact fit where older ones were bright lights great product
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
10/19/2021
I apologize for the confusion. The grommets you are referring to are located in the related parts tab on the product description, item #A91GB.
Helpful Links
Accessories-and-PartsOptronicsA91GB.html