Does Optronics Mini Thin Line LED Marker/Clearance Light # AL191AB Use Grommet # A91GB

Question

Question:

do this lights fit into grommet a91 gb thanks in advance

asked by: Patrick K

0

Expert Reply:

Yes, the Optronics Mini Thin Line LED Marker/Clearance Light # AL191AB can be flush-mounted using the Optronics Flush Mount Grommet # A91GB. This PVC grommet will provide a degree of shock protection for the installed light and its rear opening allows easy access for wiring.

If you prefer a surface-mount installation, you can instead use self-grounding mounting bracket # A91BB.

The marker light # AL191AB has a 2-prong input on the back; you can use 6-inch pigtail plug # A46PB, or if you need longer leads, part # A86PB, which is 18-inches long.

For your reference I have linked a product review video for this light fixture.

expert reply by: Adam R

0

Answer 1

Typically 4-way wiring consists of 18 and 16 gauge wires. For a 4-way that has all 16 gauge wire you would want the Wesbar 4-Pole Flat Connector #W787264. The part #HM38138 uses 18 gauge for all wires but the white that uses 16 gauge.

view full answer...

Answer 2

I will be happy to help you find the right LED replacement lights for your horse trailer. Based on the information you have provided the amber LED replacement is #MCL76AB. The red version is #MCL76RB. Another option is to use Peterson lights #M353A…

view full answer...

Answer 3

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...

Answer 4

The distance between the mounting holes on the back of the Buyers Products 5-Position Channel with Gussets #337B8979 that you referenced is 10 inches.

view full answer...

Answer 5

We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4" hitch on your 2016 Nissan Altima. I recommend the adapter #e43YR. This is 6-1/2" long and will go in to your 1-1/4" hitch and give you a 2"…

view full answer...

Answer 6

To get the best braking power for your boat trailer you would want to have disc brakes on both axles. If you happen to be limited to one axle then you would want the rear outfitted. With a 5,000lb boat you likely have two 3,500lb torsion axles. The…

view full answer...

Answer 7

Send me the pictures you have and I'll see if it's something we can get.

view full answer...

Answer 8

We do have the Peterson Piranha LED Clearance or Side Marker Light M170R #PET88FR. This is the same as the Amber #M170A you found but with the red lens you are looking for as well.

view full answer...

Does Optronics Mini Thin Line LED Marker/Clearance Light # AL191AB Use Grommet # A91GB

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching