LED Clearance or Side Marker Light w/ Reflector - Submersible - 4 Diode - Rectangle - Amber Lens
(41 reviews)
Price: $20.49
In Stock
LED Clearance or Side Marker Light w/ Reflector - Submersible - 4 Diode - Rectangle - Amber Lens
Item # MCL76AB
Our Price: $20.49
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (41)
- Q & A (0)
- Photos
Optronics Trailer Lights - MCL76AB
- Clearance Lights
- Rectangle
- LED Light
- Amber
- 6L x 2W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Submersible Lights
- Optronics
5-13/16" x 2". Waterproof, LED trailer light serves as a side marker light or a clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design. P2 rated.
Features:
- Rectangular trailer light functions as both a clearance light and a side marker light when properly mounted
- Built-in reflex reflector eliminates the need for a separate reflector
- Sonically sealed, waterproof housing and lens unit is submersible
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Amber polycarbonate lens with white LEDs
- Surface mount with built-in flange - hardware not included
- 2-Wire design includes power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 5-13/16" long x 2" tall x 1-3/16" deep
- Distance between mounting holes (center on center): 4-13/16"
- Diodes: 4
- Power draw at 12.8V: 0.063 amps
- Input voltage: 12V
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Surface-Mount Light
Surface-mount lights install flat against the surface of the trailer, so a hole does not need to be cut into the trailer for the light. This type of light is installed using a flange or bracket that has mounting holes. And mounting hardware is used to secure the light to the trailer.
P2-Rated Lights
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MCL76AB Optronics LED Clearance or Side Marker Light w/ Reflex Reflector - Submersible - 4 Diode - Rectangle - Amber Lens
Alternate part number: MCL-76AB
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
LED Clearance or Side Marker Light w/ Reflector - Submersible - 4 Diode - Rectangle - Amber Lens - MCL76AB
Average Customer Rating: 4.8 out of 5 stars (41 Customer Reviews)
5-13/16" x 2". Waterproof, LED trailer light serves as a side marker light or a clearance light. Built-in reflex reflector. Durable polycarbonate lens and housing. Surface mount - hardware not included. 2-Wire design. P2 rated.by: Steven 03/27/2024
Just installed them. Really brite. Being sealed and waterproof will solve problem of them getting wet in saltwater
by: Nick M11/17/2020
Easy install, mounting hole dimensions matched exactly the incandescent amber OEM Peterson marker lights on our 2004 Lakota 2 horse gooseneck. They bright, low amperage draw.
by: Joe12/13/2023
These lights work great! Much brighter than my incandescent ones did.
by: Tony 01/10/2023
Great price great product looks and works great on nitro boat trailer.
by: Al05/31/2016
Three years ago I replaced all my boat trailer lights and installed
the led lights and they are really bright lights for traveling at night.
I have four of the red led on the back of the trailer and you can see
these for a great distance. Makes the trailer very visible at night.
These led lights are the best.
Best Regards
Al
by: David04/04/2018
I received product in a timely manner when I first ordered it,and now it's been a year of fishing with me launching the boat in and out of salt water. The lights have held up great with no issues.
David
4/4/2019
Still working
by: Easy Bins11/07/2014
I guess I didn't really read the description well enough, but these things are HUGE... in comparison to the regular amber marker lights I get. If space is a problem, then triple check the dimensions for your application. Other than that, I'm sure they'll glow beautifully, and I love that it's a one piece unit.
by: Mary09/21/2022
All was good on the order except on red running light didn’t work. One had hairline crack.
by: Matthew12/07/2019
This LED unit was a perfect replacement in terms of size and mounting hole spacing for the side marker incandescent unit on a 2006 Trailex model 7541 open car trailer that needed upgrading. The grounding wire with grommet made for a easy installation when replacing the single wire unit.
by: Mark G.07/01/2018
These LED clearance side marker lights were easy to install and light up nice and bright on my trailer. Thanks!
by: Steve 11/11/2019
Great service with prompt shipping. Great follow-up to see if I was satisfied with the entire process, which I was.
I relighted our entire horse trailer with the above clearance/running lights last year. The only reason I've ordered more is someone has stolen several of the light off the trailer!
by: Darryl05/17/2018
These marker lights are sharp looking and easy to install. The LED's put out ample light and are very modular in design. Thank you again etrailer for solving my boat trailer re-build.
by: kevin j01/22/2016
Will use as side turn signal light.
Only 4 LED, not super bright, but very clear and distinct sharp light points, catches attention.
Has 2 pin disconnect on back with plug and two wires.
by: Douglas01/20/2021
After an order mixup, customer service made everything right. Very pleasant rep and fast service. Highly recommend. New led lights look excellent and are a direct fit replacement on my Prevost Motorhome. Will buy from them again. Price was BETTER than Amazon.
by: Jc08/09/2020
Marker light was exact match. Good qual ity.
Jc
8/11/2021
The lights are working perfect. Bright and clearly visible. No problems since installation.
by: Lenora01/07/2019
I am answering for my husband, and as his wife I can tell you he is very happy with his lights. They are already installed.
Anything for his boat/trailer is like jewelry for me (LOL!)
by: Richard07/20/2018
I ordered these lights to replace the old incandescent lights that corroded from water and dirt infiltration. These lights are much more brilliant than the original incandescent lights they replaced. Hopefully they will also last much longer.
by: Kyle10/20/2020
These are very nice lights a little bigger than my factory lights. But they covered up the holes perfectly.
by: Sean C.01/04/2018
They are sturdy and bright! Makes my boat trailer look great!
by: O. G. Va.09/19/2016
Easy installation and excellent visibility.
Well made.
by: Andrew P.04/03/2017
Everything went very smoothly. Website very user friendly. The dimensions of lights on the website very helpful with matching my old lights for new LED ones. Fast shipping as well.
by: Cliff04/01/2013
Professionally made. Good product.
Cliff
4/1/2014
The Lights are professionally made and still holding up great after a year.. Installed on a Twin Seadoo Trailer.
by: Melinda 08/31/2022
Great lights.
by: Lenora01/06/2019
I am very happy with these lights. Easy to install and look and work great.
Good service from this company and I would recommend them.
by: JC07/07/2017
The lights were a perfect match to my existing ones,quick shipping. Great job guys ! !
25
41
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- What Light Is Similar To the Peterson PM130The closest replacement to the Peterson PM130 is the red lens # MCL76RB and the yellow lens being # MCL76AB. Both lights will use the existing mounting holes, so you don't have to drill additional holes. You can also get the foam gasket to prevent water from getting into the back of the light # A76GB. Below are review videos on the product.
view full answer... - How Does the Clearance Light MCL76AB Normally Wire Into Running Light CircuitSince the clearance light part # MCL76AB that you are interested in is LED it could easily be wired into the running light circuit of your trailer and not cause any problems. What you would need to do is splice the black wire into the running light circuit and then ground the white wire and it would function well for you.
view full answer... - Dimensions of Sealed, Rectangular LED Trailer Clearance and Side Marker Light MCL49ABThe dimensions of the Sealed, Rectangular LED Trailer Clearance and Side Marker Light, # MCL49AB, are 3-7/8 inches long, 2 inches wide, and 1 inch deep. The closest lights we have that fit those dimensions are the Sealed, Miro-Flex, Star LED Marker/Clearance/ID Light, Chrome Cover, 2 Wire, 4 Diode - Amber, # MCL19AB, and the Rectangular LED Trailer Clearance, Side Marker Light, 4 Diode - Amber, # MCL76AB. Neither are exactly 5 inch by 2 inch but they are both very close.
view full answer... - Replacement Amber And Red Marker Lights For 2001 Covered TrailerThe side marker lights we offer that are closest to the dimension you gave are 5-13/16 inches long and have mounting holes that are 4-13/16 inches center to center. The amber lights are part # MCL76AB or part # MC76AB and the red marker light with the same dimensions is part # MCL76RB. The # MCL76RB and # MCL76AB are LED lights and do not have replaceable components. The # MC76AB light uses 2 incandescent bulbs and the light bulbs and lens are replaceable.
view full answer... - Recommended LED Lights To Replace Peterson PM130To replace your Peterson PM130 side marker lights you'll want to use the LED # MCL76RB for red, and # MCL76AB for amber. However I wasn't able to find any pictures of your monarch 5134 lights, so if you can send me a picture of them with some measurements I'd be happy to go over the best LED replacement for those.
view full answer... - Is the LED Clearance or Side Marker Light w/ Reflector item # MCL76AB12 Volt or 120 Volt?The LED Clearance or Side Marker Light w/ Reflector item # MCL76AB is a 12 volt light.
view full answer... - Replacement 6 x 2 LED Trailer LightsPeterson has two of their lights which will work perfect for your application. The Red Piranha LED # M353R, and the Amber Piranha LED # M353A both measure 1-9/16 inches tall, 6 inches long, and 2 inches wide. The mounting holes measure 4-3/4 inches center-on-center. A more economic option is offered by Optronics. Rectangular LED - Red # MCL76RB, and Rectangular LED - Amber # MCL76AB. These LED lights have mounting holes which are 4-13/16 inches center-on-center (which is very similar),...
view full answer... - LED Trailer Clearance Light Recommendation to Replace Peterson PM-130 Our best option for LED lights to replace your Peterson 130 style lights is the Rectangular LED Trailer Clearance Light, # MCL76AB for amber and # MCL76RB for red. These lights measure 5-13/16 inches long, 2 inches wide, 1-3/16 inches deep, and mounts on 4-13/16 inch centers. As for the ground wire, you will just need to run the ground wire on the light to a clean metal surface. Your current lights are designed to ground through the mounting hardware whereas these are not.
view full answer... - What Is Wire Size For Parts And Recommended ConnectorsI called the manufacturers to confirm wire sizes. The Optronics lights, Item # STL9RB and Item # MCL76AB, will have 20-18 gauge wires. The Electric Trailer Brake Kit, Item # AKEBRK-35, will have 12-10 gauge wires. I recommend using the Deka Heat Shrink Butt Connectors. For the 20-18 gauge wires this will be Item # DW05743-10 and for the 12-10 gauge wires it will be Item # DW05745-10. If you need additional wire for your project, Item # 10-1-1 and Item # 10-2-1 are available. I...
view full answer... - Replacement Clearance Lights for Arctic Snowmobile TrailerIf you want replacement LED lights, I recommend the Rectangular LED Trailer Clearance, Side Marker Light, 4 Diode - Amber # MCL76AB and the red # MCL76RB. If you want replacement incandescent lights, I recommend the Rectangular Side Marker or Clearance Light w/ Reflectorized Lens, 2 Wire - Amber # MC70AB and the red # MC70RB
view full answer... - LED Trailer Clearance Light Recommendation to Replace Peterson PM-130Our best option for LED lights to replace your Peterson 130 style lights is the Rectangular LED Trailer Clearance Light, # MCL76AB for amber and # MCL76RB for red. These lights measure 5-13/16 inches long, 2 inches wide, 1-3/16 inches deep, and mounts on 4-13/16 inch centers.
view full answer... - Replacing Peterson PM130 Incandescent Trailer Lights with LED VersionsI will be happy to help you find the right LED replacement lights for your horse trailer. Based on the information you have provided the amber LED replacement is # MCL76AB. The red version is # MCL76RB. Another option is to use Peterson lights # M353A and # M353R. Since lights can sometimes go through design changes the new lights may not have the exact same dimensions as the old lights so that would be why you see slight differences in the measurements between your old lights and these lights.
view full answer... - Reflective Lens Amber Clearance Or Sidemarker Lights For Truck Or Trailer ApplicationThe Rectangular LED Trailer Clearance, Side Marker Light, 4 Diode - Amber, # MCL76AB, is a great light. It measures 5-13/16 inches long x 2 inches wide x 1-3/16 inches deep. It can be used as clearance or side marker light. The reflectorized lens is DOT compliant, eliminating need for separate reflector. The two-wire design includes lead and ground wire for mounting to any surface. The light draws 0.063 amps at 12.8 volts. These are sonically sealed, waterproof lens and housing in...
view full answer... - Replacement LED Marker/Clearance Lamps for Peterson PM130 on 1998 4Star Horse TrailerWe offer a very similar LED clearance/marker lamp that has the same 4-13/16 inch bolt hole spread as the Peterson PM130 lamps you have. For the Red lens, use # MCL76RB or for an amber lens, use # MCL76AB. Both lamps will use the existing mounting holes, so you won't need to drill additional holes. Also recommended is the # A76GB foam gasket to prevent water from getting to the rear of the lamp.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Installed by:
Joe V
Installed by:
Cole B
Video Edited:
Patrick B
Video Edited:
Dustin K
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Nick M.
11/18/2021
So far lights have performed well.