2-1/2" x 1-1/4". Waterproof, LED trailer light functions as a clearance or side marker light when properly mounted. Durable polycarbonate housing and lens. Flush mount with grommet. Accepts standard 1-prong and 2-prong plugs. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Optronics mini thin line sealed LED marker and clearance light. This amber light provides a marker or clearance light for your trailer, it is sonically sealed so it's completely waterproof. The two prong connector on the back will accept a standard two prong plug, a two prong plug is sold separately and available at etrailer.com.This unit contains one LED or one diode. Now LEDs are great replacements for incandescent lights, they last longer, they burn brighter, and they're much more efficient. You don't have to worry about replacing bulbs or worry about brittle filaments. The polycarbonate lens is very strong and durable, it's SAE and Department of Transportation compliant.This light is designed to be mounted using a mounting bracket or a mounting grommet, those items are sold separately and available at etrailer.com but I do have some examples to show you what it would look like.
This right here would be our mounting grommet, the light simply fits into the grommet and it gives it a really nice finished look so this is an option, it's available at etrailer.com. The other option would be a bracket like this where the light would actually snap into so it'd snap into place and the bracket would hold it and then here on the back instead of requiring a two prong connector it would only require a one prong plug because the other prong . actually it'll go this way. The other prong would engage this hole here which has a bridge that goes over to one of the mount holes so it would ground through mounting hardware.It's a really nice design. Taking a look at the measurements real quick, measures about two and a half inches long by an inch and a quarter wide by one inch deep.
We're gonna go and hook it up to our power source that way you can see what it looks like with power running to it. We can also turn off our overhead lights so you can see that it sends out a very bright, consistent signal. Again one LED or one diode design, the power draw at 12.8 volts is 0.023 amps and Optronics puts a lifetime warranty on the LED.That's gonna do it for today's look at the Optronics mini thin line sealed LED marker clearance light.
Average Customer Rating: 4.8 out of 5 stars (1689 Customer Reviews)
2-1/2" x 1-1/4". Waterproof, LED trailer light functions as a clearance or side marker light when properly mounted. Durable polycarbonate housing and lens. Flush mount with grommet. Accepts standard 1-prong and 2-prong plugs. P2 rated.
Trailer marker lights were great quality & look good. Installation was quick and easy. They have endured a lot of rough terrain bouncing with no problems. Ordering & delivery was quick easy.
I was looking for replacement lights for a used jetski trailer i bought.
I found exact replacement LED's.
The email updates were extremely nice and the shipping was super fast.
I will be ordering again from this company.
These marker lights are great and easily mounted and wired into my Shorelander trailer.
Perfect match for my boat trailer side light. 2 minutes to install great price conpared to manufacturers price.
Good inventory, excellent customer service. Definitely my place to go for trailer parts.
Product was easily installed on our boat trailer.
Thanks
Exactly what I needed for my trailer these lights are hard to fine
Great products. They were shipped and here in 2 days. Installed them yesterday and everything works fine. Will definitely keep etrailer on my preferred vendor list.
The parts we're good quality and came in a timely manner I'M glad I Ordered from etrailer I'LL use them again for sure.
Fits perfectly
easy replacement
Works great. Single led is perfect
They are great just what I wanted
Fast delivery, good price, item as described, and exactly what I needed.
Excellent service.
Arrived quickly and it fit as expected.
Excellent product excellent service
Great product and Price
Very quick service. Great communication.
fit great, bright, easy to install.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.