Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs
(119 reviews)
Price: $111.47
In Stock
Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs
Item # BD178203
Retail:$171.49
Our Price: $111.47
You Save: $60.02
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (119)
- Q & A (0)
- Photos
Bulldog Trailer Jack - BD178203
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 4001 - 5000 lbs
- Sidewind Jack
- Swivel Jack
- Pipe Mount
- Weld-On
- Leveling Jacks
- Tongue Jacks
- 15 Inch Lift
- With Rectangle Foot
- Steel
- Bulldog
Footplate and 5/8" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle.
Features:
- Dependable jack is recognized as industry standard for agricultural and commercial applications
- ASABE compliant
- Tubular swivel design lets you swing jack up for travel, down for use
- Included pull pin holds jack in place
- Precision-fitted parts provide exceptional stability and reliability
- Sidewind handle has smooth, ergonomic design for easy cranking
- Outer tube is gray-paint finished
- Inner tube is zinc plated
- Weld-on pipe mount and standard footplate included
Specs:
- Bracket height:
- 15-3/8" Retracted
- 30-3/8" Extended
- Lift: 15"
- Clearance: 6-3/8" from mounting bracket to top of jack
- Inner tube diameter: 2"
- Outer tube diameter: 2-1/4"
- Handle radius: 5-13/16"
- Pull pin diameter: 5/8"
- Lift capacity: 5,000 lbs
- Limited 5-year warranty
178203 Bulldog Round Tubular Swivel Jack, Sidewind, 15" Travel, 5,000 lbs - SWL 178 DTSF w/ P & C
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Arrived Damaged
Customer Reviews
Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs - BD178203
Average Customer Rating: 4.8 out of 5 stars (118 Customer Reviews)
Footplate and 5/8" diameter pin are included with this round, swivel-mount jack. Ideal for agricultural and commercial uses. Jack has 15-3/8" retracted height and measures 6-3/8" from mounting bracket to top, excluding handle.by: Bernard11/03/2022
Busted clean off where the main lift cylinder is welded to the bracket. The weld did not penetrate the lift cylinder at all, on either side. The whole weldment remained attached to the bracket. The cylinder didn't receive enough heat to melt during the weld. Instead, the weld puddle just lay across the cylinder.
by: Etienne Jack04/09/2024
Very nice to deal with these guys.
by: Jeff G.05/25/2017
Welded them to trailer for stability during rear loading, also good for changing out wheels
by: Wesley02/11/2019
Received product in 2 days, excellent communication on order status and follow up once order was received. Installed these on a 20’ utility trailer to stabilize the rear when I load my skid steer. Thank you.
by: Frank 07/15/2023
Great product and the sidewind was a nice upgrade to what I currently have!
by: Frank 12/05/2023
Excellent product! I purchased one not to long ago for try it out and quickly came back to buy another. Solid product, highly recommend.
by: Mike N04/20/2020
Ordered the Bulldog jack , service was fast and accurate. Gave the product to a friend to replace the Bulldog jack on his trailer since I had broken the jack on his trailer when I borrowed it.
by: 09/10/2023
Product was as described and received in a timely manner.
by: Rick 10/03/2023
Fair price Quick shipment AAA +++
by: Blair 12/16/2022
this particular jack is easier to use that the top winding handle and has lasted much better than top winders
by: EdR07/28/2017
I had this side handle trailer jack installed by a welder on my light weight utility trailer. It is easy to crank up or down and very sturdy. I replaced an old wheeled jack with the pull and spin option for moving the jack out of the way. This one is much easier and faster to use. I would highly recommend this.
by: Bill D06/09/2017
I recently purchased a hitch set up for my Toyota Tundra. I installed the towing kit without having to drill any holes. It arrived in a timely manner and I am very pleased with cost and the product!
I plan to pull a trailer withe towing package. I also purchased a bulldog lift for a work related piece of equipment that also worked very well.
by: Charlie K05/03/2020
I’ve had my trailer Jack I purchased from etrailer.com for a year now. It’s attached to a 10’ pull behind Bush Hog shredder and It has served me well, no issues whatsoever and the buying experience was great.
by: Gary 08/02/2020
great product and etrailer went above and beyond to help me get my jacks. they were sent and for some reason i didn't get them, called etrailer they got them right back out and i have them Thanks!
by: Russell11/06/2020
We are an OEM and had a customer spec a trailer jack from another website. When we couldnt procure that trailer jack anymore, etrailer helped cross to this one. Pricing was in line and the customer liked the new product.
by: Don 05/11/2021
Fantastic Jack. Works better than any jacks I have ever used on my trailers. Highly recommend them to anyone needing to replace a jack or if you are building a new trailer.
by: Sean 09/27/2022
Very smooth when lifting the trailer. Would recommend to a friend.
by: Mike 10/11/2019
Good quality product and good service from etrailer. I replaced a 2K jack with a 5K of the same make. It’s mounted on a 1815 bushhog and the 2K jack was just not enough jack to lift it.
by: James05/03/2019
This jack showed up faster than expected, fit right on my already welded pipe tube and lifted the trailer with little effort. IT is much nicer than the one it replaced.
by: Luis pozuelo03/16/2018
Just like the original.
Smooth operation and weight of trailer is lifted easily.
Only thing missing is a grease port to grease internal gears.
by: Shelby 11/04/2022
Great to do business with etrailer very satisfied with product fast delivery
by: ABSS04/11/2019
Great replacement jack, very heave duty, after a year of use still working perfectly
Thank you etrailer
by: Mike07/11/2018
These Bulldog jacks are perfect for my trailer. Very well built.
etrailer always delivers quickly and makes it a good experience.
by: Richard05/09/2019
These jacks are built tough. Surprised by their weight. They will be welded on the back of a flatbed trailer used to haul light farm equipment. We will take the trailer to town soon to have the welding shop work on it.
by: Ray11/06/2020
Nice jack. We sell lots of these bulldog jacks. They're very reliable.
25
119
Show More Reviews
See what our Experts say about this Bulldog Trailer Jack
- Mounting Ring Diameter for the BullDog Round, Pipe-Mount Swivel Jack # BD198250The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
view full answer...
- Recommendations for Side-wind Pipe-Mount Weld-On Swivel Jacks Rated for 5000-8000 LbsWe offer the Bulldog Round Pipe-Mount Swivel Jack rated for 5000 lbs, part # BD178203. This includes the 2-inch weld-on coupler pipe (and retaining pin and clip) and the foot plate. This jack offers 15 inches of lift. Please refer to the video link provided. We also offer the Bulldog Square Swivel Jack, part # BD190758, which also provides 15 inches of lift, includes the 2-inch weld-on coupler pipe, pin and clip, and footplate. This jack is rated for 8000 lbs static capacity and also offers...
view full answer... - Is the Bulldog BD178203 Compatible with the Fastway Flip FootI have a solution for you, but the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs # BD178203 is not compatible with the Fastway Flip Foot # FA88-00-4500 since the leg and inner tube are a single piece. Instead, you'd need to use a jack that had a removable foot on the drop leg like the Pro Series Square Jack with Footplate - Drop Leg - Topwind - 28-5/8" Lift - 5,000 lbs # PS1400800383 or the Bulldog Square Jack w/ Footplate - Drop Leg - Sidewind - 28-1/2" Lift...
view full answer... - Replacement Bulldog Jack Recommendation to Fit Trailer with Round Pipe MountThe Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
view full answer... - Weld-On Jack Pipe Mount Recommendation for a12,000 lb Equipment TrailerI went out into our warehouse and pulled a Bulldog Round, Pipe-Mount Swivel Jack, part # BD178203, that has the same 2 inch inner diameter and 2.5 inch outer diameter pipe mount swivel jack as yours. I then test fit a Bulldog 2-1/2 inch Long, Weld-On Jack Pipe Mount for 2-1/2 inch, part # BD005024, and a Bulldog 2-1/4 inch Long, Weld-On Jack Pipe Mount for 2-1/2 inch, part # BD015279. I found that either will work dimensionally, the # BD015279 will fit on the inside and the # BD005024...
view full answer...
- Trailer Jack Pipe Mount Upgrade From 3,000 lb Bulldog Swivel JackThank you for the pictures and info! Since you had a Bulldog winch I recommend sticking with that brand because they are reliable and you can be confident that the pipe mount will match up exactly. To upgrade from a 3K we have the 5K # BD178203 or 7K # BD198250 depending on how much extra capacity you'd like. They both have a 15" lift and they are backed by a limited 5-year warranty so either one will fit your needs just fine.
view full answer...
- Is 5,000 lb Bulldog Topwind Jack Stronger or Easier to Use than Bulldog Sidewind JackThe sidewind and top wind 5,000 lb Bulldog pipe-mounted trailer jacks you asked about have the steel construction with a zinc-plated inner tube and 5,000 lb capacity, so they are equal in strength. We also have a similar version by Pro Series. They also have the same ease in regard to cranking, though this can be based on personal preference. Some people would rather crank vertically (sidewind) as opposed to horizontally (topwind) and clearance is also another consideration if there's...
view full answer... - What Size Pipe Does Pro Series Swivel Trailer Jack, # PS1401440303, Fit OnI spoke with my contact at Pro Series about the Swivel Jack, # PS1401440303. He stated that the mount will fit on a 2 inch diameter pipe on the trailer. The pin is a 5/8 diameter pin. It does also come with a pipe of its own that you can weld to the trailer should you need to. The mount diameter is the same for Bulldog Round, Pipe-Mount Swivel Jack, # BD178203.
view full answer... - How To Fix Topwind Jack From Hitting Toolbox On Trailer FrameThe best option we have to give you clearance for the handle would be a side wind jack, the Bulldog Round, Pipe-Mount Swivel Jack part # BD178203 which I can't imagine would hit the toolbox. That said, this would really be the only option as there isn't another choice aside from topwind and sidewind.
view full answer... - What Tubular Swivel Trailer Jack Is Available To Replace A Bulldog 170 SeriesThe Bulldog Trailer Jack, # BD195304, you have referenced is a direct weld jack. A similar jack to the # BD195304 in a tubular swivel mount with a round mount would be the Bulldog Round, Pipe-Mount Swivel Jack - Topwind, # BD178151. It has a 5,000 lbs. support capacity, 15 inches lift and is a topwind. The Bulldog Round, Pipe-Mount Swivel Jack - Sidewind, # BD178203, is a tubular swivel mount with a round mount and it also has a 5,000 lbs. capacity, 15 inches of lift, but it is a sidewind.
view full answer... - Can I Exchange my A-frame Trailer Jack for a Side Mount Jack so Tailgate Can Be Lowered?I can certainly understand how you would like to lower your truck tailgate while hitched to a trailer. Yes, you can switch from an A-frame jack to the Bulldog # BD178203 side mounted swivel jack. You will need to weld on the pipe mount of course. With your current jack, adjust the jack height until the trailer is level, then measure from the top of the coupler to the ground. From that measurement add 4" and that is the height you need. If 15" is long enough, then the BD178203 is good...
view full answer... - Replacement Mounting Ring Pipe for Bulldog Swivel Jack BD178203It looks like the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 5,000 lbs, item # BD178203 has a 2 inch outside diameter male receiver with a 5/8" pin hole that welds to the trailer frame, so you can use the Weld-On 2" Diameter Pipe Mount Tube for Pipe Mounted Trailer Jacks # DL22670. I do recommend you check the diameter of that outer pipe to confirm this will fit. If you find you've got a different outer diameter on that mounting pipe, just let me know and I can get...
view full answer... - Bulldog Round Side Mount # 178203 Overall HeightThe overall height of the Bulldog trailer jack part # BD178203 when it's retracted is 21-3/4 inches overall.
view full answer... - What Pipe Mount Could Pro Series Trailer Jack # PS1401140303 FitThe Pro Series trailer jack part # PS1401140303 that you referenced is designed to fit on a pipe mount diameter of 2 inches so if that's the size you have now (it looks like you do) then yes, this would easily fit on the same mount for an easy install. If you have a different diameter let me know and I'll see what might fit.
view full answer... - 1,000 lb Jack Recommendation for Boat Trailer with 2 inch Pipe MountThe Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15 inch Lift - 7,000 lbs, item # BD198250, has a male pipe on the jack and a female receiver that welds to the trailer. This female receiver has an inside diameter of just over 2-1/2 inches to fit on the 2-1/2 inch male pipe welded to the jack. This jack utilizes a 5/8 inch pin to secure the jack to the trailer. For a jack with a 2 inch outside diameter male receiver that welds to the trailer frame and has a capacity of 5,000 pounds,...
view full answer... - Recommended Trailer Jack To Clear Tailgate With A-Frame TrailerI do have an option for you but the tongue jack only needs to be rated for the tongue weight of your trailer which will only be around 10-15% of its loaded weight. Therefore, you are likely only going to need around a 700-1,000 lb weight capacity. The higher rated you go, the better off you will be but an 8,000 lb option would be far too much. In order to clear your tailgate while the trailer is attached you are likely going to need a side mount, swivel option. I recommend the Bulldog Round...
view full answer... - Pipe Mount Trailer JackIn your case the setup is designed for the jack to fit inside of the pipe mount rather than outside the Bulldog Round, Pipe-Mount Swivel Jack part # BD178203 is designed to fit a pipe mount that has a 2-1/2 inch outer diameter and a 2 inch inner diameter. As long as the pin hole on your pipe mount is 5/8 inch in diameter this jack would work well for you. I attached a review video for you to check out as well.
view full answer... - Recommendation for Replacement Bulldog Trailer JackI would need the model number of your jack to find the exact match. We do have several Bulldog side crank jacks that are a possible fit. I have included a link below to our Bulldog swivel jacks, pipe mount with 15" lift. There are round and square jacks with weight capacities from 2,000 to 8,000 lbs.
view full answer... - What Type Of Trailer Jack Will Fit a Trailer With a 8" Tall Frame? Typically trailers with an 8" tall frame will have mounting for a A-Frame type Jack # 3370091265. This is mainly because jacks like the # ARK57FR can only fit up to a 6" tall frame. You do an option to add a Pipe-Mount Swivel Jack # BD178203 by either welding the pipe mount to the frame or creating a bolt on bracket you will be able to attach to the side of the frame with the included pipe. This jack has 15" of total lift with a height of 15-3/8" from the mounting bracket to the bottom...
view full answer... - Replacement Handle for Bulldog 5K Sidewind Swivel Trailer Jacks with Round TubesFor Bulldog trailer jack # BD178203 the correct replacement handle is # BD500105.
view full answer... - Jack Recommendation for a Trailer that has a Pipe Mount that Is 2-3/8 Inch OD and 2 inch IDThe Bulldog Round, Pipe-Mount Swivel Jack # BD178203 is designed to fit a pipe mount that has a 2-1/2 inch outer diameter and a 2 inch inner diameter which is very close to what you have on your trailer. As long as the pin hole on your pipe mount is 5/8 inch in diameter this jack would work well for you. I attached a review video for you to check out as well. This is a 5,000 lb jack that should work well for you.
view full answer... - What is the Difference Between Bulldog and Pro Series Pipe-Mount Swivel JacksThe differences between the two jacks is minimal. The main feature difference is that the Bulldog # BD178203 has the ASABE (American Society of Agricultural and Biological Engineers) compliancy certification whereas the ProSeries # PS1401440303 does not. Bulldog uses this compliancy certification to test durability and longevity whereas the Pro Series jacks do not use this process. The other main difference is the Bulldog has a 5 year warranty and the ProSeries has a 1 year warranty. The...
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Written by:
Lindsey S
Installed by:
Patrick B
Installed by:
Adam E
Installed by:
Aidan B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alexander C
Video by:
Jonathan Y
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
11/8/2022
This jack does have a limited 5 year warranty. Customer service will be in contact with you.