Bulldog Round Side Mount # 178203 Overall Height

Question

Question:

How long is the outer tube

asked by: Russell K

0

Expert Reply:

The overall height of the Bulldog trailer jack part # BD178203 when it's retracted is 21-3/4 inches overall.

expert reply by: Jameson C

0

Answer 1

The Bulldog jack part #BD195356 that you referenced weighs 19 lbs.

view full answer...

Answer 2

Thank you for the pictures and info! Since you had a Bulldog winch I recommend sticking with that brand because they are reliable and you can be confident that the pipe mount will match up exactly. To upgrade from a 3K we have the 5K #BD178203 or…

view full answer...

Answer 3

I have added a photo detailing the wiring connections for the Pollack Heavy-Duty, 7-Pole, Round Pin conncetor, #PK11700, see link. This is a SAE J560 compliant connector. The wiring diagram for the vehicle side connector, #PK11720, is pictured…

view full answer...

Answer 4

Bracket height is the height of the jack from the center of the mounting bracket to the bottom of the jack when retracted and extended. In this case this jack #BD195356 is 15-1/8" Retracted and 30-1/8" Extended. From the top of the…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 9

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 12

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Bulldog Round Side Mount # 178203 Overall Height

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching