Mounting Bolts and Hardware for 12" Single Brake Assembly

See what our Experts say about this Redline Accessories and Parts

• Availability of Left Hand etrailer Brand 12 x 2 Self-Adjusting Electric Trailer Brake Assembly
  Absolutely! The left hand 12 x 2 self adjusting brake assembly is part # AKEBRK-7L-SA. If you need mounting hardware we offer it as part # BRKH12S.
  view full answer...
• Replacement Brake Assemblies for Axle Tek B12EA-24
  I was able to cross reference the B12EA-24 and AxleTek 12-GG numbers you gave me and found the exact replacement you're looking for. For the Left Assembly you will want part # AKEBRK-7L-SA and for the Right Hand assembly you will want part # AKEBRK-7R-SA. These brake assemblies are made by AxleTek and measure 12 x 2 inches. These assemblies come in a quantity of 1 so if this is a tandem axle trailer you would need to order 2 of each of these assemblies. Since these do not come with mounting...
  view full answer...
• Replacement Electric Brake Assemblies for Dexter Brakes 23-358 and 23-357
  Yes it will! The Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs # AKEBRK-7R-SA will replace your 23-358 assembly from Dexter. If you need the left hand as well that is part # AKEBRK-7L-SA. You will also need mounting hardware with this brake assembly: - 1 Brake Assembly: Mounting Bolts and Hardware for 12" Single Brake Assembly # BRKH12S - 2 Brake Assemblies: Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12 I have added links...
  view full answer...
  
• Correct Replacement Electric Drum Brakes for 12 Inch Axle Tek Hubs on 2010 Dutchmen Aerolite
  It sounds like you're looking for electric brake assemblies to fit your 12 inch Axle Tek hubs. If so, the Electric Trailer Brake Kit # AKEBRK-6 would be the correct kit. This includes a left and a right hand side manual adjusting brake assembly, so for two axles, you'd just need two kits. We also have part # AKEBRK-7-SA, if you're looking for self-adjusting brakes. And for the mounting hardware (nuts, bolts and lock-washers) you can use part # BRKH12S.
  view full answer...
• Replacement Self Adjusting Brakes for B12E-01 Axletek-12-GG Electric Brake Assembly
  You can use the # AKEBRK-7-SA to replace your existing Axletek brakes and they'll work well for you. This is a self adjusting set of brakes and will fit on your existing hubs; you'll also need brake mounting hardware, which is available with part # BRKH12S. If you wanted to go with the Dexter Nev-R-Adjust brakes, those are available with parts # 23-465 (RH) and # 23-464 (LH). I've linked a short review video of these brakes for you to have a look at.
  view full answer...
• Replacement Electric Trailer Brake Assembly for Axletek Hub BD-655
  From that number you supplied, it appears you have axles that are 5,200-lb to 6,000-lb with a 12" - 6 on 5-1/2 bolt pattern. For brake assemblies I recommend # AKEBRK-7R-SA for the right hand side and # AKEBRK-7L-SA for the left. This is a self-adjusting 12' brake assembly, mounting bolts and hardware, # BRKH12S sold separately. If you do decide you need to replace the hub and drum assembly, I recommend, # AKHD-655-6-K. This is an etrailer replacement hub and drum assembly supplied...
  view full answer...
• Trailer Brakes for 12 Inch Hub and Drum
  The Electric Trailer Brake with Dust Shield - Self-Adjusting # AKEBRK-8R have an 8,000 lb capacity and measure 12-1/4 inches in diameter and 3-3/8 inches wide so that is the dimension your drum would need to be. These fit a 4-bolt mounting flange such as # 4-50 and would require Mounting Hardware # BRKH122508. If you have 12 inch drums there are options for that, the Electric Trailer Brake Assembly - Self-Adjusting # AKEBRK-7L-SA (Left) and # AKEBRK-7R-SA (Right) which are 12 inches in...
  view full answer...
• Replacement Brakes and Hub/Drum Assembly for Dexter Axle 5.2K - 7K E-Z Lube Axles
  Thank you for all of the pictures! From the pictures I can tell you that you need replacement brakes # AKEBRK-7R-SA (right hand) and # AKEBRK-7L-SA (left hand), as well as the Dexter Trailer Hub and Drum Assembly # 8-219-4UC3-EZ. You might also be in need of replacement hardware for 12" brake assemblies which you can find as part # BRKH12S. I have attached some sample installation videos for you to reference. Let me know if you have any other questions!
  view full answer...
  
• 5,200 Lb Timbren Axle-Less System With Compatible Hub, Drum and Electric Brakes
  The Warner-style brake assemblies are no longer made and replacement parts are essentially non-existent at this point, so really your best option is going to be replacing your hub and drum as well as brake assemblies. You may also need to weld on a new brake mounting flange, which will be determined by the diameter of your axle. In order to find the correct replacement hubs for your trailer you need to know the weight rating of your axle, and also what bearings your current hub has. You...
  view full answer...
• Is There a Difference Between Brake Assembly Replacement for Dexter Nev-R-Adjust 23-459
  The only difference between those parts is the part number - they are the exact same brake assembly. The Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand # AKEBRK-7R-SA would be a perfect replacement for the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 12" - Right Hand # 23-459. To install it you only need the Mounting Bolts and Hardware for 12" Single Brake Assembly # BRKH12S. If you are looking for the left side at any point, that would be the Electric Trailer...
  view full answer...
• Replacement Brake Assembly For B12EA-22 on Forest River 27DTSS Travel Trailer
  We offer a compatible replacement brake assembly. You'll need # AKEBRK-7R-SA for the right replacement brake assembly and # AKEBRK-7L-SA for the left. Both assemblies are self adjusting. If you need replacement mounting hardware, use # BRKH12S, which provides hardware for one brake assembly. In order to recommend a replacement brake drum, I'll need to know the reference numbers off of your inner and outer wheel bearings and the bolt pattern of your current hubs.
  view full answer...
• Can Timbren 5200 lb Axle-Less Suspension Be Installed on I-Beam Trailer Frame
  The Timbren # TASR5200S03 can absolutely be used on a trailer with an I-beam frame, but you'll need to weld a piece of steel plate onto the outboard side of the I-beam to box off the frame so the Timbren system can attach properly. Timbren doesn't offer the 5200 lb system complete with hubs and brake assemblies but I'd be happy to recommend hub/drums and brake assemblies for you. For hub drums, our house brand # AKHD-655-6-EZ-K with a 6 on 5-1/2 inch bolt pattern would be fully compatible...
  view full answer...
• Dexter 7,000 lb 12 Inch Hydraulic Drum Trailer Brakes w/ Parking Brake to Replace Tex Trail 6400070
  We do! I did some research and the Tex Trail 6400070 is the right hand Dexter 12 inch, 7,000 lb hydraulic drum brake with parking brake lever, and our part number for that brake is the following: - Dexter Uni-Servo Hydraulic Trailer Brake Assembly w/ Parking Brake Lever - 12" - Right Hand # T2351200 This is the same as 6400070, and to mount it you will need the Mounting Bolts and Hardware for 12" Single Brake Assembly # BRKH12S. Just to be thorough, if you did want to replace both the...
  view full answer...
• Will Dexter Electric Brakes for 6,000 lb Axle Work With 7,500 lb Axles
  The Dexter Electric Brake Kit for 4 Bolt or 5 Bolt Flange # 23-105-106-09 will work so long as your hub and drum is 12" diameter x 2" wide, you have a AL-KO/Hayes 4-bolt or standard 5-bolt brake flange and 14-1/2", 15" or 16" wheels. So long as you meet all those requirements you can use these brakes and be just fine. To mount three of these assemblies you will also need three of the Mounting Bolts and Hardware for 12" Single Brake Assembly # BRKH12S. I have added a link to a video review...
  view full answer...
• Recommended Mounting Bolts and Hardware for 12" Brake Assemblies
  Yes, we do! They are the Mounting Bolts and Hardware for 12" Single Brake Assembly item # BRKH12S if you're just replacing one brake or item # BRKH12 if you are doing both sides. The Electric Trailer Brake Assembly item # AKEBRK-7L-SA is just the left side assembly. You'll need item # AKEBRK-7R-SA if you are changing the right side as well. If you want help finding the correct hubs I would just need to know what size bearings are currently on your trailer and your lug pattern. Feel...
  view full answer...
• 12 Inch Trailer Braking Assemblies And Mounting Hardware For A Dexter 6K Axle
  The mounting bolts used with 12" braking assemblies, like the: -Dexter Electric Trailer Brake Assembly # 23-105 for the left side, and # 23-106 for the right side, is 1-1/4" Long x 3/8" diameter mounting bolts with the corresponding 3/8"-24 nuts. If you need a full set, you can use the Mounting Bolts and Hardware for 12" Single Brake Assembly # BRKH12S, which contains 5 mounting bolts, 5 nuts, and 5 lock washers.
  view full answer...
• Recommended Drum Brake Assemblies for Home Built Trailer with 4 Hole Brake Flange and 6 Lug Hub
  For the 6 lug hubs, the brake assemblies compatible with your 4 hole flange are the Dexter Electric Brake Assembly for 4 Bolt or 5 Bolt Flange - 12" - Left Hand - 6,000 lbs # 23-105-09 and the Right Hand # 23-106-09. For your hardware I recommend the Mounting Bolts and Hardware for 12" Single Brake Assembly # BRKH12S. The Trailer Hub and Drum Assembly - 5.2K and 6K E-Z Lube Axles - 12" - 6 on 5-1/2 - Pre-Greased # AKHD-655-6-EZ-K will work well for this assembly if you need replacement...
  view full answer...
• Which Brake Assemblies to Replace Rockwell 4074L and 4074R
  The Rockwell 4704L and 4704R are standard 12x2 electric brake assemblies. I'd recommend using # AKEBRK-6L for the left and # AKEBRK-6R for the right. Install hardware is available separately as # BRKH12S. When you get the hub/drum pulled off, be sure to inspect the inside armature surface of the drum that the brake magnet rides against. If it's pitted or grooved, you'll want to replace the brake drums as well. For a 6-bolt, use # 42866UC3-EZ or # 8-201-9UC3-EZ for an 8-bolt. The hub/drums...
  view full answer...
• Replacement 12 Inch Manual Adjusting Electric Drum Brakes for 5,200 Pound Dexter Axle
  Part # 23-106 is a 12 inch manual adjusting brake that fits your drums. Even though it's listed for 6,000 pound axles it's still what you need on your 5,200 pound axles. It's the right hand side, like you mentioned and part # 23-105 is the left, or you can get the kit of them together with part # 23-105-106. Since you need three (whch I admit is a little strange since you should replae them in pairs) you could get the kit for tow of them and then an extra left hand assembly. Everything...
  view full answer...
• Should Lock Washer be Used for Factory 12x2 Brake Assemblies
  Not necessarily. Some brake assemblies have Loctite like part # LT37423 on the bolts while other assemblies, like part # AKEBRK-7L-SA, require mounting hardware that includes lock nuts like what you would find in the kit # BRKH12S. If your brakes have Loctite on the mounting bolts then you don't really have to worry about the lock nuts on them.
  view full answer...

Do you have a question about this Accessories and Part?