CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
(24 reviews)
Price: $57.82
In Stock
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
Item # CE13109
Retail:$71.99
Our Price: $57.82
You Save: 20%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (24)
- Q & A (0)
- Photos
CE Smith Trailer Hubs and Drums - CE13109
- 4 on 4 Inch
- For 2700 lbs Axles
- Hub
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Pre-Greased
- Standard
- 1/2 Inch Stud
- L44649
- L44649
- CE Smith
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.
Features:
- Kit lets you replace 1 hub assembly on your trailer
- Includes bearings, races, grease seal, grease cap, lug nuts, and cotter pin
- Perfect for storing onboard your trailer in case of an emergency
- Pre-greased with heavy-duty, marine-grade lubricant
- Ideal for boat trailers
- Strong, cast iron hub is painted black
- Double-lip grease seal helps keep moisture out and grease in
- Zinc plating on lug nuts, cotter pin, and grease cap helps to limit corrosion
- Carrying case with handle keeps all the parts in one place
- Made in the USA
Specs:
- Application: 2,700-lb axles
- Maximum wheel diameter: 12"
- Bolt pattern: 4 on 4"
- Wheel studs: 1/2" diameter x 1-7/8" long
- Hub inner diameter: 1.98"
- Hub flange outer diameter: 5-9/16"
- Weight capacity: 1,350 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner and outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner and outer race: L44610
- Grease seal (included): 12192TB
- Inner diameter: 1.249"
- Outer diameter: 1.983"
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
13109 C.E. Smith Trailer Hub Kit - Straight Spindle - 4 x 4 Stud Pattern - 1,350-lb Capacity
California residents: click here
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Package not accepted
- Did not fit
Customer Reviews
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased - CE13109
Average Customer Rating: 4.7 out of 5 stars (24 Customer Reviews)
Everything you need to replace 1 hub on your trailer fits inside of this handy carrying case. Inner and outer bearings (L44649) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade grease.by: Peter 11/06/2021
Great assistance identifying the correct model for replacement hub.
They also expedited delivery. Product fits perfectly and repair is completed at much less cost than my local trailer parts retailer. I'll be back!
by: Fleet Management03/27/2023
Easy to instal. Helped bring new life to an old boat trailer.
by: Greg12/28/2021
Both of the plastic casings are broke but, hubs are fine. Could be better packing since UPS kills packages.
Sierra K.
12/29/2021
Customer Service will reach out to you.
by: Andy S.05/16/2022
These hubs claim to be pre-greased.There was certainly some grease on the bearings but woefully inadequate and required me to pull out the roller bearings and properly pack them with grease. Mine definitely weren't ready for prime time. Check the bearings and pack them properly with grease before you rely on these for an emergency. Also, they come with 1.25" inner grease seal. Didn't fit my axle that required a 1.50" ID seal. Swapped seals and all was good!!!
by: George11/10/2021
Listed as in stock, shipped as two separate packages. Second package arrived without nuts, split pin, and dust cap. Probably because it was package carelessly. Kind of like my wrong size chrome caps that were just thrown, uncovered, in a giant box with my trailer tires on my previous order. I am sure Joshua will sort it out because he takes pride in in job and is a professional, but with two jacked up orders in a row, I’m done with etrailer.com.
by: Jeffrey G04/25/2020
I order all of my trailer accessories from your company. Fast shipping professional customer service and the parts always fit
by: Henry.11/10/2021
Stacy of etrailer was fantastic. I did not know much about trailer repair parts but Stacy walked me through explaining the parts names and usage for the items I needed and when I checked other sites they did not have my products nor did they ship for free. Great experience!
by: Dave05/08/2022
A great kit to replace the bearings and hub. Simple and easy to use on my 1995 popup.
by: Randy L.10/14/2016
So far so good .no complaints .im happy enough that I ordered tires and wheels from this site today. Very easy to navigate site.
by: Tom K07/31/2017
Great wheel bearing. It's holding up very well.
by: John 02/20/2023
Gwendolyn‘s customer service was second to none. Thanks again!
by: john b03/30/2017
This product fit perfect.
The real credit goes to Etrailer.com and their service. I have used them many times. As always, A+ product and service. I will use them again I am Sure of that! John B
by: Mark10/04/2017
Chelsea was helpful and pleasant while assisting me with acquiring the right parts. That;s my story and Im sticking to it.
by: Daniel 01/22/2023
Right fit and fast delivery.
by: Jeff 10/01/2022
Worked perfectly. Tried others without luck. These are great.
by: Jerry Lee08/12/2017
Good product. Excellent service. Quick shipping
by: Paul 04/24/2021
Great product
by: Brent08/02/2015
Great Product!
by: Jeffrey 10/21/2021
Excellent service as always
by: Eric 03/08/2024
by: Michael 09/29/2023
by: Billy 11/04/2023
by: Gary 09/27/2021
by: Stephen 08/09/2023
24
24
See what our Experts say about this CE Smith Trailer Hubs and Drums
- Replacement Hub for Dexter Torflex 2,200 AxleFor your Dexter Torflex 2,200 lb trailer axle the correct hub replacement is the # CE13109 which has a 4 on 4 inch bolt pattern like you need and also the correct bearing numbers of L44649. This is also pre-greased which means you have a super easy install that's not overly messy as well.
view full answer... - Availability of a 3500 lb Hub with a 4 on 4 Bolt PatternThe highest weight rated idler hub we offer with a 4 on 4 bolt pattern would be the # CE13109 which has a 2700 lb capacity and uses a # L44649 inner and outer wheel bearing and a 12192TB grease seal which has a 1.249 inner and a 1.983 outer diameter. If your existing hub uses this bearing set and grease seal, this hub would work, but you'd be limited to the 2700 lb stated capacity. The hub includes the inner and outer bearings, races, grease seal, dust cap and cotter pin. The bearings are...
view full answer... - Replacement Hubs for 2,700 lb AxleBased on your photo it looks like you have 2,700 lb axles, and we do have hubs for that size axle. However, you will need to confirm the bearings your current hub has. You will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper to measure your spindle to the thousandths of an inch where the bearings...
view full answer...
- Will CE Smith 57-1/2" Long 1.8k Axle Work With 4 on 4 Inch Hubs On Harbor Freight TrailerYes, you are able to mount a 4 on 4 inch bolt pattern hub on the CE Smith Trailer Axle # CE33201GA. I recommend the CE Smith Trailer Hub Assembly # CE13109 to pair with this axle. To ensure this axle will fit on your Harbor Freight trailer, I recommend taking a hub face and spring center measurement of your current axle. There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face...
view full answer...
- Solution for 60 Inch Replacement Axle For Hubs With L44643 BearingsThe CE Smith # CE13110 is designed for 2,500 lb axles with # L44643 bearings. All of our available 60" axles use # L44649 bearings. The only solution would be to switch to hubs with the same bolt patter that use # L44649 bearings. The Dexter Trailer Idler Axle w/ Idler Hubs # 20440I-EZ-60 that you looked at would work as a replacement assuming you only need a 2,000 lb capacity. For a 2,200 lb axle we have the # T20BTR-EZ-6048. Since this doesn't come with hubs you will also need # CE13109...
view full answer... - Replacement Trailer Hub Assemblies For A 1976 Valley Forge I do have options for you however, in order to recommend the correct hub assemblies for your 1976 Valley Forge, I would need to know the inner and outer bearing numbers located on the inside edge of the bearing or if these are not visible, I would need you to use a digital caliper such as the Carbon Fiber Digital Caliper part # PTW80157 to measure both the inner and outer bearing seats on your spindle. I have attached a video that will further explain this process. If your current hubs...
view full answer... - Recommended Replacement Idler Hub for Karavan Boat Trailer with L44649 BearingsIf you're just looking for an idler hub, the CE Smith Trailer Hub Assembly with Carrying Case part # CE13109 for 4 on 4" or part # CE13311 for 5 on 4-1/2" are a great pre-greased option with carry case so you can keep one nearby when ready to use.
view full answer... - Recommended Pre-Greased Hub With 1-1/16" Inner And Outer Bearings And 4 On 4 Bolt PatternThe CE Smith Trailer Hub Assembly w/ Carrying Case # CE13110 uses the # L44643 bearings which are designed to be used with a 1" spindle. As you have a 1-1/16" spindle, it will not fit properly. What you will need is the CE Smith Trailer Hub Assembly w/ Carrying Case # CE13109. This uses the # L44649 bearings and will fit much better.
view full answer... - Replacement Hub Assembly for 1987 Calkin Boat TrailerIt sounds like you currently have # L44649 bearings with an inner diameter of 1.063" and a grease seal like the # 34823 with an inner diameter of 1.249". For a hub that matches these, along with the 4 on 4 bolt pattern, we have the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased # CE13109. This hub has a weight capacity of 1,350 lbs (for 2,700 lb axles) and fits wheels up to 12" in diameter. It is pre-greased with heavy-duty marine-grade lubricant...
view full answer... - Hub Recommendation for Trailer with 2,700 lb Axle CapacityI would agree you are going to have a much easier time finding wheels with a 4 on 4 inch bolt pattern than 5 on 5-1/2 inch as that's not a very common size. Most likely the hub part # CE13109 that you referenced is a confirmed fit but you might want to verify the bearing numbers of your current hub to be sure. If your bearing numbers are both L44649 or have an inner diameter of 1.06 this will fit and work well.
view full answer... - Compatible Hub for TRU44FR BTR SpindleThe # TRU44FR spindle you'd looked at is compatible with an L44649 inner and outer bearing, like what's used by the # CE13109. The hub includes the inner and outer bearing and race, the grease seal, the dust cap and the lug nuts. The hub has a 4 on 4 bolt pattern. For a 5 on 4-1/2 inch bolt pattern, use # AKIHUB-545-2-LFEZ-2K.
view full answer... - Trailer Hubs for a 2500 Pound AxleIt sounds like you might have a BTR spindle such as # TRU44FR as an example. It takes bearing L44649 for the inner and outer bearing. We have a couple of hubs that you could use. As a bonus they are pre-greased and ready to go! We have # CE13109 with a 4 on 4 bolt pattern. And we have # CE13311 for a 5 on 4-1/2 bolt pattern. These are the only option rated high enough for a 2500 pound axle. There are no galvanized options at that weight capacity. There are some in the 2200 pound axle...
view full answer... - Replacement Hub and Wheel For Unitized Hub on 2000-lbs Axles with Inner Bearing L44649I have a solution for you on this, but we do not have any unitized assemblies available, so you would need to get a new hub and wheel for your trailer. I'll also mention that the # AKIHUB-440-2-2K won't work for you since the grease seal does not match up with the 1.250" ID of the National seal you mentioned. However, you can use the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased # CE13109 which use # L44649 inner and outer bearings and have a grease...
view full answer...
- Replacement Hub for Starcraft Pop-Up Trailer Thank you for providing that helpful information. The replacement will depend on the bolt pattern you are looking for. If you need a 5 on 4-1/2 bolt pattern we have the Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-LF-2K. If you need a 4 on 4 bolt pattern then we have the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased # CE13109.
view full answer... - Washer and Nut to Use with CE Smith Trailer Hub # CE13109The CE Smith Trailer Hub Assembly part # CE13109 does not come with a spindle nut or washer so if you needed that as well you'd need the # RG05-100 which is a it for both sides of the axle that includes washers and nuts.
view full answer... - Correct CE Smith Trailer Hub Assembly for BTR E-Z Lube Spindle 2,500 Lb AxleThe BTR E-Z Lube Spindle part # TRU27FR uses L44649 bearings so the CE Smith Trailer Hub Assembly part # CE13109 would be correct.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Peter
11/7/2022
Replacement Hubs and Bearings installed without trouble and have been working fine over the past year. Much easier as a DIYer to replace the entire assembly with pre-greased bearings.Good fit, good performance.