Compatible Hub for TRU44FR BTR Spindle
Question:
Ok I ordered the wrong spindles. Do they make an easy lube for that hub?
asked by: Brad B
Expert Reply:
The # TRU44FR spindle you'd looked at is compatible with an L44649 inner and outer bearing, like what's used by the # CE13109. The hub includes the inner and outer bearing and race, the grease seal, the dust cap and the lug nuts. The hub has a 4 on 4 bolt pattern. For a 5 on 4-1/2 inch bolt pattern, use # AKIHUB-545-2-LFEZ-2K.
Products Referenced in This Question
Easy Grease Trailer Idler Hub for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2500 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
BT8 Spindle for 2,000-lb Trailer Axles - 1-3/8" Diameter
- Trailer Spindles
- Standard Spindle
- 8-1/4 Inch Long
- 1-3/8 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-1/4 Inch Diameter
- Round
- For 2000 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: Most Popular Wheel Bearings
- Q&A: Where to Find Serial Number of Truxedo Tonneau for Replacement Tarp
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: Weight Capacity of Dexter P-12 SLR SN: D5287869 Axle
- Q&A: Replacement Hub and Spindle for Dexter 69-46 Axle
- Q&A: Which Grease Seal for Trailstar Boat Trailer
- Q&A: Recommended Grease Seal w/ a 1.25 ID and a 1.98 OD
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Maintenance Schedule
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Rust Prevention
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
Brad B.
2/3/2022
I have 17-170 I bought from e-trailer will these work with those spindles? I believe that is the bearing it has in it? I added a photo