Replacement Hub for Starcraft Pop-Up Trailer
Question:
Hi I have an older Starcraft pop-up trailer. I need a new wheel hub and bearing assembly. Could you recommend a pre-greased hub for a bt16 spindle. Additional specs: Uses inner bearing # 44649 - 1 1/16 inch inner diameter. - Uses outer bearing # 44649 - 1 1/16 inch inner diameter. - Grease Seal - 1.5 inch inner diameter.
asked by: Scott A
Expert Reply:
Thank you for providing that helpful information. The replacement will depend on the bolt pattern you are looking for. If you need a 5 on 4-1/2 bolt pattern we have the Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-LF-2K. If you need a 4 on 4 bolt pattern then we have the CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased # CE13109.
Products Referenced in This Question
CE Smith Trailer Hub Assembly w/ Carrying Case for 2,700-lb Axles - 4 on 4 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- CE Smith
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 13" to 15" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Tire Sizing
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Q&A: What is Maxx Coat on DeeMaxx Disc Brake Kit and Why is There a Mix of That and Stainless Steel
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Trailer Idler Hubs With L44649 Inner and Outer Bearings And 1-1/4 Grease Seal
- Q&A: Is There a 5-Lug Idler Hub for Trailer with Two L44649 Bearings
- Q&A: Replacement Hubs/Bearings for 2000 Kendon Folding Trailer With 1-1/16 Inch Diameter Spindle
- Q&A: Replacement Hubs for a 1998 Tracker TrailStar Boat Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure a Trailer Axle
- Article: Trailer Wiring Diagrams