Summer Starts Here - Save up to 70%
Install this shock-absorbing, adjustable mount to get 6 stacked 2-1/2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. 2" Ball, 2-5/16" ball, pintle hook and stabilizer kit included.
Features:
Specs:
This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 6 stacked 2-1/2" receivers. This lets you easily adjust the height of the included ball mount, or any other accessory you choose to use. This mount also has built-in shock absorption to ensure a safe, smooth towing experience. Using technology similar to that found in torsion trailer axles, the Gen-Y mount absorbs road shock, isolating any rough jarring or chucking at the connection point. This prevents the rough motion from transferring from the vehicle to the trailer and vice versa.
Driving over bumps, potholes, and uneven terrain causes road shock, which can result in a rough, bumpy ride and even potentially damage your vehicle or trailer. This Gen-Y Hitch torsion mount is designed to absorb road shock at the connection point to create a safe, smooth ride. This is thanks to the internal construction of the mount, which is similar to that of a torsion axle.
Pivot points are built into the Gen-Y mount. This allows for movement between the base, which slides into your vehicle's trailer hitch, and the stacked receivers, which provide the connection point for your trailer. When your trailer hits a bump, the stacked receiver portion of the mount will move up or down accordingly.
Built into the Gen-Y mount are tubes with inner bars that are surrounded by rubber cords. As the receivers rise or fall, these inner bars twist inside of the tubes, attempting to follow the receivers' motion. But the rubber cords prevent the bars from twisting too far. And as each bar turns, these cords compress to absorb the shock. This means that any shock experienced by your truck can be absorbed before it reaches your trailer, and the shock experienced by your trailer won't get transferred to your truck.
This type of shock-absorption system is easy to maintain. Just regularly apply grease to the built-in zerk to keep the components in working condition. No airbags to fill. No small parts to repair or replace. No hassle.
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 6 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.
With the 6 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. This heavy-duty mount is built with a 2,400-lb tongue weight, so you can even use multiple hitch accessories at the same time, as long as there are no clearance issues.
Because this mount has such a significant drop, a stabilizer kit is included to prevent any wobble and to keep the mount stable and sturdy as you tow. Simply bolt or weld the brackets onto your truck's frame, and connect the stabilizer bars to the back of the Gen-Y mount. The stabilizer bars can easily be adjusted to span the distance between your vehicle's frame and the Gen-Y ball mount.
If you remove the mount from your hitch, the stabilizer bars can be disconnected from the brackets using the included pins and clips so that you can remove the bars from your vehicle as well.
Note: Because of how the stabilizers install on the ball mount, this mount should only be used in the drop position.
This mount features a built-in mechanical tongue weight scale. The red section on the top of the scale indicates your maximum tongue weight (2,400 lbs). The red section on the bottom of the scale indicates no tongue weight (0 lbs). A tongue weight of at least 1,600 lbs is recommended for the built-in shock absorption to function effectively. This means that the scale's white indicator marker should be in the green section when you hook up your trailer to tow.
Average Customer Rating: 4.7 out of 5 stars (51 Customer Reviews)
Install this shock-absorbing, adjustable mount to get 6 stacked 2-1/2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. 2" Ball, 2-5/16" ball, pintle hook and stabilizer kit included.anyways thus far it's a #5 I haven't really used it but I will sooner than later. Your hitch is on this bad boy!! Thank you for considering my 2020 Ford Velocity Blue F350 Lariat Special addition!!!
The order process was smooth. But, when trying to find out about the the lifetime warranty offered by Gen Y on the rubber components in the hitch Nicole could not answer my question.
I asked if I was able to purchase through you and if not could I purchase from Gen Y even though I bought the hitch from you.
This is something customer service should know the answer too.
You would have gotten five stars but it was ruined by lack of knowledge by your staff.
Awesome hitch, the tongue weight scale is the cheesiest thing I've ever seen on a product with this price point- a sticker that was peeling up when I received it and a little white paint mark that wiped away when I used an alcohol wipe to clean it before covering with super glue to try and make it hold up past the first rain event. Come on Gen Y your engineers can surely come up with something better that will actually last for years. You got the hitch down, now just focus on the details.
First impression massive, heavy Built Stout. My truck is always hooked to a trailer so I figured I would try a nicer set up I was using the B&W which is great for the average Joe that just needs to pull a trailer every now and then but this is a whole new world first trailer I pulled with It I could feel the difference right away it was smoother the vibrations and harsh thump feelings that I would normally get when pulling the trailers when I hit rough roads or bumps was not as bad or gone. It definitely made a huge difference super easy to move height if needed and an added bonus I didn’t think of is that it pushes the trailer back further so you can get a little tighter turning when backing up if needed and i can open the tailgate and it won’t hit the jack on the trailer. On top of that when people see it it’s a conversation starter There are not many of these out there so they are intrigued by the size and how it works. Bottom line in my opinion if you’re towing all the time it is worth the investment. I would invest in another.
It is a strong hitch. If you leave it in your receiver plan on it rusting even with the coating that it has on it. The coating on the ball with most cases need to be scraped off before your hitch will even fit over it so that will rust right away as they normally do. Was hoping the rest of it would look a little better after one year.
Would definitely order parts from your company again...thank you
Solid 6” drop hitch that is extremely heavy but well made. Very smooth with bigger loads. Required some modification to my Fab Four bumper for proper fit. I gave it four stars because my hitch didn’t have the set screw option as advertised.
03 Duramax 2500hd with six inch lift, 35” tires
16000lb Curtis receiver (well made five stars)
Built like a brick s@%thouse. Works great! Keep in mind I use this for pulling same trailer loaded same way every day. I could figure out optimal hitch weight and keep it there
Worth the money if you are pulling heavy loads.fit and finish it top quality.
Quality product. Very Robust. I bought this hoping to dampen some of the shock my truck, which is about 15,000 lbs, transmits to my boat, which is about 8500 lbs, thinking it may help with the boat's longevity. It helps with big shocks for sure, but the hitch needs to be in the top 2/3rds of its rated capacity to noticeably dampen the shock between your trailer and tow rig. It works wonders on my loaded dump trailer.
This thing is built like a tank. I have towed a few items that have been reasonably heavy (although not at 21,000lbs). I can say that it does a good job at limiting the aftershock of terrible roads that I have been on. It does a good job and is easily versatile to use with the adjustments available. The hitch should endure travels towing for quite a long time considering how well it is built.
Best hitch ever... performs above and beyond as advertised. Will never use straight or drop hitch again. We pull our bobcat up the 4wd drive beaches of North Carolina which are often bumpy. This hitch separated the trailer movement from the truck. Well worth the money. Do it once and never do it again!
Very nice, well built hitch, but the torsion part of it only works well when towing near the upper load limit of the hitch. Buy the same hitch without the torsion if you are not going to be pulling heavy loads near hitch capacity. You'll save lots!
My brother and my son recommended this to me. I got to ride along with my son as he hauled a 10,000 lb. camper. Wow! I couldn’t believe the difference it made in the ride! The ride was so much smoother not to mention the wear and tear it saves on the tow vehicle! I’m impressed with the service from etrailer also. The package arrived in great condition, everything was there, and it even came a day earlier than expected! I highly recommend them!!!
Great product
Takes away the jerking sensations of speed bumps and the occasional pothole.
When you do hit a bump at speed it takes a while for the flexing to settle back into a smooth ride. I equate the feeling like being in a boat. Now that I’m used to it it’s hardly noticeable.
Great hitch. Just makes my safety chains to short.
Great service. I made a mistake and ordered the wrong item. I was bummed there was a restocking fee but it was my mistake so I cant be to mad. They were very responsive on correcting the order. Hitch definitely seems super well built.
I received my torsion hitch as promised from etrailer. The hitch is built with quality
And very simple to install. I will be using it for the first time in a coupe of days.
Excellent Quality, better driving while you with trailer and Made in USA.
I love it
Thanks to the company
works great, heavy duty, good investment
Haven't installed it yet, but this things a beast. For the manufacturer, you should put a couple of heavy stickers on it for the delivery guys,lol. Looks well built and can't wait to see how it acts with my camper.
EASY AND SIMPLE PURCHASE THIS HITCH IS BADASS VERY STRONGLY BUILT
Seems to be an impressive product. But even more impressed with the purchase experience. Great price, great freight policy, it was packed protectively and arrived way ahead of schedule. I’ll be looking for more products to buy from this etrailer.
Solid product! etrailer sent this heavy item very quickly and I will look to do business with them again.
Very Fast service, exactly what was ordered, will shop with these folks again
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.