Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2-1/2" or 3" hitch receiver. Included twist clip secures pin and is easy to install and remove. Usable length is 4". Zinc finish resists corrosion.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Colin: Hey guys, Colin here at Etrailer. Today I'm going to take some time and show you guys this hitch pin from Gen Y. This is for 2-1/2 inch and three inch hitch receivers. This is going to be a direct replacement for your hitch pin. It's going to allow you to get matching pins for your hitch pin, as well as the pins that are on your Gen Y ball mount. But it isn't just limited to your Gen Y ball mount.
If you've got to take this out and maybe put a cargo carrier in, you can use it for that as well.As you can see, it's the exact same design as the pins that are for our ball mount. The difference being the pins for our ball mount are a little bit thicker in diameter. The one for our hitch pin is going to be 5/8 inches in diameter. There other one's going to be a little bit bigger so that it can fit your ball mount accessories for your Gen Y. And what's nice is that it does have the twisting hitch pin right there, the clips I should say, so that when we insert it, you can see it's good for 2-1/2 inch and three inch receivers.In my opinion, these clips are much easier to use.
So personally, I'd go with that over just the standard clips that come right off. We've all been there, where just is a little bit rusted and then you just feel like you have to just yank as hard as you can. And when you finally get it off your arm flies back with it. It's not really ideal, but the twisting action, it just makes it much easier to get it on and off.The pin itself is going to be a really sturdy steel construction. It's going to be just as strong as the pins that come on your Gen Y ball mount.
We'll go ahead and take the clip off real quick. Now it's also going to have a zinc coating that's going to help it resist rust and corrosion. And for usable space, so from the bottom edge of our hole down to the base of the head of our pin, we're going to have about four inches of usable length. The overall length is going to be 5-5/8 inch.So like I said, it's going to be good for your 2-1/2 inch and three inch hitch receivers. And as we talked about, we do have that 5/8 inch diameter.
Now I really liked the Gen Y made a pin for my hitch receiver so that it can get it matching, and looking better with all of my other pins for my Gen Y ball mount. Now something I do want to advise, is that if you plan on leaving your really nice Gen Y ball mounts in your hitch receiver for long periods of time, I'd recommend just going ahead and getting a locking pin.We have plenty of those available and plenty of different manufacturers of them here on our website. We have our own brand, the Etrailer brand. We also have Infinite Rule and other locking pins available. So check out our website if that's something of interested in. But personally, I don't like leaving my ball mount in my hitch receiver when I'm not using it. So I just take it out when I'm done and put it in my truck. And because I don't leave it unattended for long periods of time, I'm good to go with this hitch pin right here. I don't have to make that investment into a lock.Well, thank you all for watching and I hope this information helped you out. That'll do it in front of it for our look at the Gen Y hitch pin for 2-1/2 inch and three inch hitch receivers.
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
Use this durable hitch pin to secure your ball mount or hitch-mounted accessory to your 2-1/2" or 3" hitch receiver. Included twist clip secures pin and is easy to install and remove. Usable length is 4". Zinc finish resists corrosion.Smoothly machined. Fits in Clevis hitch it was purchased for. This picture shows two holes, the one I received only has one hole.
I purchase all my trailer supplies from you. Great products. Thank You
Great product. I needed the extra length. The pin and clip are excellent. No rust and holding up well for my boat, dump trailer and utility trailer. Good customer service. I would recommend etrailer any time.
I bought two of these hitch pins about a year ago for our 2021 F250 with OEM 2.5" hitch receiver. We pull a 39' 10,000 lbs. toy hauler and use the pins with a weigh safe true tow hitch. The pins have held up well and have not rusted. I like the quarter turn locking pin engagement or disengagement. I would recommend this product from etrailer.
Excellent inventory and fast shipping. The items I ordered exceeded my expectations.
The Gen-Y 4" hitch pin provides extra length when trying to put your hitch on your receiver. The knob end makes it easier to position for clip placement, sometimes the angle end is in the way and won't rotate enough. The hitch pin is very strong and durable, have used on a solid hitch with a 2 5/16" ball. No wear, continues to fit into hitch and receiver easily.
Great hitch. I was just a dummy and lost a pin. I could have put any pin in there but I wanted the quality one that came with the hitch
Long enough for my new super duty truck with 2.5” receiver hitch with adapter.
The box was shipped with a heavy item in the bottom and 8 marker lights loose in the box with nothing to protect them, very unusual for etrailer, I’m surprised nothing was broken . I’m very satisfied otherwise with the service and speed of delivery.
Great pin. doesn't have the bent handle which an be a problem in some hitch applications. Well made great shoulder size on the head end. Thanks!
Ordered these and package came ripped open without pins inside. Contacted etrailer and they sent me new ones no questions asked. Gotta love a company that’s easy to work with and you can talk to without any hoops to jump through. I will buy all my stuff through them going forward.
Had them for a year and still working great. I highly recommend etrailer. They’re a great company to work with. they actually care about the customer.
The pin looks great and is very functional in summer time conditions. Unfortunately the salt in the NY winter really rusted the pin much quicker than I anticipated. My truck is babied in the winter and not driven that much in the snow and wintry conditions so the fact that the pin rusted so quickly indicates that the coating is not very good for corrosive environments.
Timely and as ordered
I use e trailer a lot and always have received quick service.Great company to deal with.
Works well. Definitely like the extra length needed for the larger hitches. Twist clip works much easier than the push clips.
Purchasing experience was outstanding. Order placed on Monday March 26 and received on March 27. Noah was very helpful and great to work with. Shipment came in 2 packages and was complete. I would highly recommend etrailer.com for purchasing your towing needs. This was the second time I have ordered from etrailer.com and both times they have exceeded expectations.
Nice innovative alternative to cotter p in.
Good for my current applications
The order was shipped when promised and arrived on time.
The items served the purpose.
Works great.
great product!
works great, the pin it super easy to get on and off
They work great and look nice.
Very heavy duty, worth the investment. Fast shipping, easy website to navigate.
Do you have a question about this Hitch Pins and Clip?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Gwyn
3/28/2024
Very good.