RV Propane Gas Detector - 12 Volt - 2 Wire - White
(182 reviews)
Price: $59.11
In Stock
RV Propane Gas Detector - 12 Volt - 2 Wire - White
Item # RS64FR
Retail:$72.99
Our Price: $59.11
You Save: 19%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (182)
- Q & A (0)
- Photos
RV Safe RV Gas Detectors - RS64FR
- Propane
- White
- RV Safe
- Indicator Lights
Sleep soundly in your RV knowing that your family will be better protected with this accurate propane detector. When gas is detected, an LED and a loud horn immediately alert you so you can get to safety more quickly. Can replace almost any alarm.
Features:
- Detector quickly warns you of hazardous levels of propane inside your RV or camper
- Helps keep your family safe and out of harm's way
- Uses less power than other detectors
- Highly selective sensor reduces the number of false alarms from non-threatening gases
- Solid red LED light and continuous horn alert you to propane gas
- Button on the front lets you test the detector to make sure it's working properly
- Also can silence the alarm up to 5 minutes for non-urgent situations
- Compact, slim design helps save wall space in your RV
- Durable polycarbonate construction in white
- Easy installation onto the wall - 2 wires hook up to your battery
- Can replace 90% of all detectors with universal mounting brackets
- Mounts 4" - 18" above the floor
- Does not include flat 1/2" self-tapping screws
- ETL and cETL listed, and exceeds UL 2034 and 1484 and CSA 6.19.01 requirements
Specs:
- Alarm dimensions: 4-1/4" long x 2-5/8" wide x 1/2" thick
- Mounting bracket dimensions:
- Larger bracket: 7-1/4" long x 3-3/8" wide
- Smaller bracket: 5-3/4" long x 4-1/4" wide
- Mounting hole spacing (center on center):
- Alarm: 3-5/8"
- Larger bracket: 6"
- Smaller bracket: 5-1/4"
- RV voltage requirement: 8V-15 V DC
- LP sensitivity: as low as 4200 ppm
- Current draw: 17 mA at 13.5V
- Alarm intensity: 85 dB
- Lifespan: 5 years
- Operational temperature range: -40 degrees F to 150 degrees F (-40 degrees C to 66 degrees C)
- 1-Year limited warranty
Having a propane gas leak in your RV is a scary situation that you don't want to even think about let alone experience. But this detector will give you peace of mind knowing that if there are dangerous levels of propane, it'll quickly and accurately warn you and your family so you can get out of the RV and into fresh air.
Hard-to-Miss Visual and Audible Cues
When propane gas is detected, the red LED will come on, and the horn will be constant. And because the sensor is highly selective, it's designed to only sound the alarm for lethal propane gas, reducing the number of false alarms that occur in non-threatening scenarios.
It'll also alert you when the battery is low or when the detector has reached the end of its life and needs to be replaced, so you never have to be without protection.
Easy to Test and Silence
To double check that the detector is operating normally, you can easily use the button on the front to test the propane sensor and battery voltage. You should test your detector every time it's taken out of storage and before it's taken out for each camping trip. This button also lets you silence the horn up to 5 minutes during non-life-threatening situations. So, you can turn off that annoying racket in the middle of the night while you're trying to hunt for a new battery.
Surface-Mount, Bolt-On Installation
The 2 included universal mounting brackets allow this detector to replace 90 percent of all OEM surface-mount and flush-mount detectors. This detector can replace most Atwood and Dometic branded detectors, as well as Safe-T-Alert 20 series, 25 series, 30 series, 35 series, 40 series, 45 series, and 65 series detectors.
Because propane gas is heavier than air, it'll settle near the floor, so this detector should be installed 4" to 18" from the floor to accurately detect the presence of gas. Also make sure that the detector is located in an area that isn't near a window or door, behind furniture or drapes, or in a closet. It also shouldn't be installed with 24" near a stove, oven, fridge, or furnace.
RVLP-2W RV Safe RV Propane Detector for Motorhomes - White
Installation Details
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Defective
- Product did not meet expectations
- Wrong item was ordered
Customer Reviews
RV Propane Gas Detector - 12 Volt - 2 Wire - White - RS64FR
Average Customer Rating: 4.8 out of 5 stars (182 Customer Reviews)
Sleep soundly in your RV knowing that your family will be better protected with this accurate propane detector. When gas is detected, an LED and a loud horn immediately alert you so you can get to safety more quickly. Can replace almost any alarm.by: Charles 03/30/2024
The original LPG Detector in our motorhome sat in what I would call the vertical position and was discontinued therefore no longer available. Etrailer showed this detector as a direct replacement even though it mounts in the horizontal position but the unit comes with two different mounting plates which allowed the original hole to be completely covered when the new unit was installed.
by: Christopher02/10/2024
Doesn't work. It is not working at all. Connected wires at install, no green light. By the way, there was no "in-line" fuse as is typically described with this install.
by: Robert 03/21/2024
Very simple installation and it easily covered the hole where the previous propane detector was factory mounted.
by: Veronica 03/25/2024
Ordered this as a replacement for a discontinued model. Live chat was very helpful in locating the right replacement. I will not be installing it until May 3rd when camp opens.
by: Rick02/12/2024
Product was a replacement for another brand that had recently failed. It covered the existing hole and was easy to install.
by: Kathleen 02/03/2024
Very fast service which is important when you’re dealing with trailer issues. You know, it always something! Good to have service you can depend on. Thank you
by: Chris09/15/2022
Easy to install, and low profile. The holes didn't match up with the old Safe T alarm so I just drilled one new one, but it does come with 2 different back plates to cover any larger hole if you need to. Just connect red and black wires on unit to existing camper wires with wire nuts, or whatever connections you prefer. I tested the alarm with a lighter and it worked. Time will tell how long it lasts, before it needs replaced. My original one lasted about 3 years before it started going off in the middle of the night for no reason. It was a safe T brand. Overall, this one was priced right and is doing the job so far.
by: Tracy03/02/2024
Fast processing and quick delivery!
Product fit without having to use the different brackets!
by: Al02/12/2024
Great replacement part. Thanks
by: James 08/25/2023
Easy to install. Mounting plate covered old outlet opening. It tested appropriately.
by: John 03/15/2024
The unit installed very easily. Works g reat.
by: Gary 07/14/2023
We received it within 4 days. It was the only one we could find that fit our needs. Great customer service! Our current gas detector needs replacement.
by: Ron 05/04/2023
A direct replacement for the 2006 Atwood Lp Gas detector that was in my Safari Airstream Trailer.
by: Gary 09/01/2023
Quick delivery and easy installation using one of the two provided wall plates.
by: Tom 06/10/2023
Delivery was within a few days, it arrived two days before my next trip. I installed it today and it covered the hole left by the OEM detector perfectly.
Thanks for the easy installation.
by: Richard 04/22/2023
Although not a like for like replacement, there was no difficulty performing the swap out. The choice of bezels made a good clean finish to the mounting.
by: Dylan04/20/2023
Replaced an outdated detector. This was a great replacement.
by: R05/15/2023
Easy to use web site. Easy to find the correct part and place3e an order. Received the correct part 3 days before ETA. Certainly will use etrailer again.
R
by: Greg 09/13/2023
fits in perfect
by: Dan 08/19/2023
Easy to install works as it should
by: John04/26/2022
Well made and easy to install
John
4/27/2023
Still working, a year later.
by: Carolyn 06/12/2023
Quick service, good product
by: Richard 10/06/2022
This detector works fine. I liked the fact that it has two different size mounting brackets which covered the hole the old one left.
by: Jerry 05/08/2023
Fast shipping and is just what I needed to replace a old one.
by: Anthony 05/15/2023
good product fair price fast ship.
25
181
Show More Reviews
See what our Experts say about this RV Safe RV Gas Detectors
- Recommended Replacement For An Atwood 31013 RV LP Detector Since the Atwood 31013 LP Detector has been discontinued you can replace it with the RV Propane Gas Detector - 12 Volt - 2 Wire - Black # RS44FR. This detector is a surface mount design and can easily swap out your old unit in just a few minutes.
view full answer... - Does RVPropane Gas Detector # RS64FR ExpireYes, the propane detectors like the # RS64FR that you referenced do eventually expire. This specific one has a lifespan of 5 years so you are due for a new one based on the age of yours.
view full answer... - Dimensions Of The RV Propane Gas Detector # RS64FRThe RV Propane Gas Detector # RS64FR itself is 4-1/4" long x 2-5/8" wide x 1/2" thick. It also includes two trim plates to cover up the old cutout hole from previous detectors: Larger trim plate: 7-1/4" long x 3-3/8" wide Smaller trim plate: 5-3/4" long x 4-1/4" wide
view full answer... - Replacement LP Gas Detector for a CCI 7770.2 / Pre Tell 22 Detector We do have some LP gas detectors available, but none would be a direct replacement for your CCI 7770.2 / Pre Tell 22. From what I could find on your CCI 7770.2 / Pre Tell 22, it has dimensions of 6.25" wide x 3.9" tall. The RV Propane Gas Detector # RS44FR (black) and # RS64FR (white) measure 4-1/4" long x 2-5/8" tall but have two different bracket sizes to fit what you need. Large bracket - 7-1/4" long x 3-3/8" tall Small bracket - 5-3/4" long x 4-1/4" tall
view full answer... - White Propane Detector for 2016 Outdoors RV Blackstone AmaviWe don't carry that exact propane detector but we do have the part # RS64FR which is an all white propane detector that would work great on your 2016 Outdoors RV Blackstone Amavi.
view full answer... - Replacement LP Gas Detector Recommendation For Older Protechtor 2001 Series LP Gas DetectorI wasn't able to find the Atwood 36720 RV Propane Gas Detector you mention, however I was still able to find the RV Propane Gas Detector # RS64FR in white, or # RS44FR in black to work as a replacement for your Protechtor Series 2001 LP Gas Detector. This replacement will work with virtually any alarm, so it is likely to work with yours as well, and features the same two wire design as your current Protechtor Series 2001.
view full answer...
- Best Replacement for Atwood RV Propane Gas Detector 31013The RV Propane Gas Detector part # RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a super clean install when finished. You'd just need to use some butt connector like part # DW05744-5 to attach the wires and you're good. We don't carry any parts with the product number 31014 unfortunately.
view full answer... - Option For Replacing A Protechtor LP Gas DetectorThe Atwood RV Carbon Monoxide and Propane Gas Detector part # AT36681 will be an excellent replacement for the ProTECHtor LP Gas Detector. This is going to be the closest option that we currently offer to the Protechtor's size. It requires a 3-9/16" long x 3-7/16" wide x 1" deep cutout hole and has a 3-wire installation. This detector has a 7 year lifespan, which is pretty standard, and will alert you when it's time for replacement.
view full answer... - Where is The Measurement For the Trim Panels On RV Propane Gas Detector # RS64FR Taken? The dimensions for the trim plates included with the RV Propane Gas Detector # RS64FR are taken at the longest and widest points of each cover so the larger bracket is 7-1/4" long and 3-3/8" wide at the furthest points. The same for the size of the smaller bracket at 5-3/4" long and 4-1/4" wide.
view full answer... - Troubleshooting Propane Detector Beeping When Battery Is Switched Off and Generator Not StartingIt sounds like your PROtechTOR 2001 propane detector is in need of replacement. Typically a Propane Detector # RS64FR will only have a 5 year lifespan before it should be replaced. Do note that even with a battery switched off by a Disconnect # 277-000403 the propane, carbon dioxide and smoke detectors are still required to have power. This is a safety regulation and the only way to cut them off is by disconnecting the battery cables and any backup batteries in the unit. As for your battery...
view full answer... - Replacement Options For An Atwood 33636E Propane Gas Detector Atwood propane detectors have been on and off available since the Atwood brand was bought out and slowly killed off by Dometic so you'd be hard pressed to find one at this point. We currently only offer the RV Safe brand which has either just propane gas detection or models with propane gas and carbon monoxide detection. Each of these come with trim plates that are a surface mount design to cover up any gaps left behind by the old unit. The small trim measures 5-3/4" long x 4-1/4" wide...
view full answer... - Recommended Replacement for Atwood RV Propane Gas Detector 31013The RV Propane Gas Detector part # RS64FR is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a super clean install when finished. You'd just need to use some butt connector like part # DW05744-5 to attach the wires and you're good.
view full answer... - Replacement Propane Gas Detector for an Atwood 31013 Propane DetectorYou can use the RV Propane Gas Detector # RS64FR to replace your current Atwood 31013 propane gas detector. This will also use a 12v, 2-wire installation like your current detector.
view full answer...
- My Atwood Propane Alarm Keeps Going Off - How Do I Turn It Off?Hello there Mike. There should be a reset/test button on your Atwood propane alarm. Pushing this button will reset the alarm and stop it from going off. If the alarm keeps going off it is either detecting gas, or it is in need of replacement. It sounds like it is still going off with the gas off so this would lead me to assume that it is in need of replacement. For a new detector I suggest the following: - Atwood RV Carbon Monoxide and Propane Gas Detector - 12 Volt - White # AT36681
view full answer... - Replacement For An Atwood 31013 RV Propane Detector The closest option to your Atwood 31013 is going to be the Atwood RV Carbon Monoxide and Propane Gas Detector # AT36681. This propane detector requires a 3-9/16" long x 3-7/16" wide x 1" deep cutout hole in order to fit and has a three wire design.
view full answer... - Recommended Replacement For An Atwood Propane Gas Detector # 31014Atwood is no longer in business so you'd have to switch over to a new brand in order to get what you need. We currently only carry the RV Propane Gas # RS44FR (white # RS64FR) which comes with two different trims (large: 7-1/4" long x 3-3/8" wide and small: 5-3/4" long x 4-1/4" wide) to help cover up the old cutout hole and mounting screw holes.
view full answer... - Replacement Gas Detector for an Atwood Series 2001 LP Gas DetectorI tried finding information on the blinking green light on your Atwood Series 2001 LP Gas Detector but was unable to find anything that mentioned a blinking green light. The Atwood Series 2001 LP Gas Detector you have is no longer available which is likely why it was difficult to find information. The Atwood Series 2001 LP Gas Detector does have a life cycle of 7 years +/- 128 days. This starts once the detector is first started up. If you believe you are close to or passed that 7 year...
view full answer... - Replacement For Atwood 36720 Propane Gas DetectorFor a replacement you could use the RV Propane Gas Detector # RS64FR (white) or # RS44FR (black). These are made in the USA with imported parts. If you want the version that also detects CO we have the # RS34FR or # RS54FR as well.
view full answer... - What Propane Gas Detector Replaces The CL0380651 Our best option for a Propane Gas Detector is the RV Safe RV Propane Detector which is available in black # RS44FR and in white # RS64FR. I was not able to find any information or references for the part number CL0380651 that you provided, but the RV Safe detector is basically a universal replacement. The alarm itself measures 4-1/4" long x 2-5/8" wide and it comes with two different size mounting brackets which allow it to fit in pretty much any space.
view full answer... - What Propane Gas Leak Detector do You Recommend for My RV?For a propane gas leak detector, I recommend using the RV Propane Gas Detector - 12 Volt - 2 Wire # RS64FR (white) or # RS54FR (black). This detector requires 8V-15V of DC power and has overall dimensions of 4-1/4" long x 2-5/8" wide x 1/2" thick. It also comes with a large and small mounting bracket for your application. It is important to note that these detectors do not include the required flat 1/2" self-tapping screws.
view full answer... - Recommended Replacement For An Atwood Propane Gas Detector 31013 The RV Propane Gas Detector # RS64FR is a surface mount design so you would only need a tiny hole for the wires to pass through the cabinet so you shouldn't need to cut any new holes. This detector comes with two trim brackets (Larger bracket: 7-1/4" long x 3-3/8" wide - Smaller bracket: 5-3/4" long x 4-1/4" wide) to help cover up to old cutout hole.
view full answer... - Recommended Replacement for Black Atwood RV Propane Gas Detector 31013The RV Propane Gas Detector part # RS64FR for white or part # RS44FR for black is what I recommend using to replace the the Atwood RV Propane Gas Detector part 31013 (Discontinued). The mounting plate for this new detector will cover up any holes you had for the previous so it will be a super clean install when finished. You'd just need to use some butt connector like part # DW05744-5 to attach the wires and you're good.
view full answer... - Replacement RV Propane Detector Trim Plate DimensionsMost of the old Atwood propane or carbon monoxide detectors have been discontinued and sold out so options are pretty limited. Since I don't know the model of your detector or size of your cutout hole I can't say for certain that the RV Propane Gas Detector # RS64FR will cover the existing hole, but I can say that it comes with two trim pieces with the following dimensions to help cover the old cutout: The long plate measures 7-1/4" wide, 3-3/8" tall and hole to hole measurements of 6"...
view full answer... - Mounting Orientation of RV Propane Gas Detector RS64FRThe RV Propane Gas Detector, # RS64FR should be installed in the horizontal orientation. This comes with two mounting bracket options to help cover over holes such as you describe. These options are 7-1/4" long x 3-3/8" wide or the second option of 5-3/4" long x 4-1/4" wide.
view full answer...
Do you have a question about this RV Gas Detector?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Mary K
Edited by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
2/19/2024
It sounds like you covered all the basics. I do not have anything to add, however I can send the warranty details for a replacement. Let me know.