Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs
(92 reviews)
Price: $676.99
In Stock
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs
Item # 325-GH-1024
Retail:$721.13
Our Price: $676.99
You Save: $44.14
In Stock
- All Info
- Reviews (92)
- Q & A (0)
- Photos
Gen-Y Hitch Trailer Hitch Ball Mount - 325-GH-1024
- Fits 2 Inch Hitch
- Adjustable Ball Mount
- Drop - 5 Inch
- Rise - 5 Inch
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- 10000 lbs GTW
- Class IV
- Gen-Y Hitch
- Stacked Receivers
- Shock Absorbing
- Steel Shank - Gray
- Steel Ball
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if the load needs to be adjusted. 2" Ball, 2-5/16" ball, and pintle hook included.
Features:
- Adjustable ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into hitch receiver on your vehicle
- 2" Ball, 2-5/16" ball, or ball paired with pintle lock provides connection point for trailer coupler
- 4 Stacked receivers accept included ball mount and pintle lock, as well as other hitch-mounted accessories
- Shock-absorbing design ensures a smooth, steady ride
- Technology functions like a torsion axle to limit transfer of road shock from trailer to vehicle and vice versa
- No airbags to maintain and fewer moving parts to repair or replace than with other shock-absorbing solutions
- Adjustable height lets you tow trailers of different heights with the same vehicle
- Drop ball mount lower or raise it higher to match your application
- Tongue weight scale is built in to help you balance your trailer
- Meter lets you know if your load needs to be adjusted before you tow
- Heavy-duty steel construction
- Zinc primer and powder coat finishes resist corrosion
- Hitch pin and clip or hitch lock for securing to hitch receiver sold separately
- SAE J684 certified
- Made in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Built-in receiver size: 2" x 2"
- Maximum drop: 5"
- Maximum rise: 5"
- Gross towing weight: 10,000 lbs
- Tongue weight: 500 lbs - 1,100 lbs
- Ball sizes: 2" and 2-5/16"
- Hitch pin hole diameter: 5/8"
- Accessory pin hole diameter: 5/8"
- 10-Year limited warranty
This unique adjustable ball mount from Gen-Y Hitch has a vertical shank that is made up of 4 stacked 2" receivers that can accept almost any hitch-mounted accessory. This lets you easily adjust the height of the included ball mount, or any other accessory you choose to use. This mount also has built-in shock absorption to ensure a safe, smooth towing experience. Using technology similar to that found in torsion trailer axles, the Gen-Y mount absorbs road shock, isolating any rough jarring or chucking at the connection point. This prevents the rough motion from transferring from the vehicle to the trailer and vice versa.
Built-In Shock Absorption for a Smooth Ride
Driving over bumps, potholes, and uneven terrain causes road shock, which can result in a rough, bumpy ride and even potentially damage your vehicle or trailer. This Gen-Y Hitch torsion mount is designed to absorb road shock at the connection point to create a safe, smooth ride. This is thanks to the internal construction of the mount, which is similar to that of a torsion axle.
Pivot points are built into the Gen-Y mount. This allows for movement between the base, which slides into your vehicle's trailer hitch, and the stacked receivers, which provide the connection point for your trailer. When your trailer hits a bump, the stacked receiver portion of the mount will move up or down accordingly.
Built into the Gen-Y mount are tubes with inner bars that are surrounded by rubber cords. As the receivers rise or fall, these inner bars twist inside of the tubes, attempting to follow the receivers' motion. But the rubber cords prevent the bars from twisting too far. And as each bar turns, these cords compress to absorb the shock. This means that any shock experienced by your truck can be absorbed before it reaches your trailer, and the shock experienced by your trailer won't get transferred to your truck.
This type of shock-absorption system is easy to maintain. Just regularly apply grease to the built-in zerks to keep the components in working condition. No airbags to fill. No small parts to repair or replace. No hassle.
Multiple Stacked Receivers for Easy Adjustment
This unique mount from Gen-Y Hitch includes a ball mount that can be easily positioned in one of the 4 stacked receivers that sits along the vertical shank of the unit. This dual-ball mount lets you tow a trailer with a 2" ball coupler or a 2-5/16" ball coupler.
Also included is a pintle lock, which can be inserted into the receiver directly above the ball mount to create a pintle hitch for hooking up a trailer with a lunette ring. Unlike other adjustable pintle hooks on the market, there are no nuts and bolts to remove and retorque when you change the positioning of this hitch. Just move the ball mount and pintle lock up or down to get the proper height and secure them in place with the included pins.
With the 4 stacked receivers, not only do you have the ability to adjust the height of the included ball mount, but you also have the ability to add various other hitch-mounted accessories. Insert a bike rack or cargo carrier. Mount a spare tire carrier. Use a tow bar to flat tow your vehicle. Or just add a fun hitch cover.
Easily Check Your Tongue Weight
This mount features a built-in mechanical tongue weight scale. The red section on the top of the scale indicates your maximum tongue weight (1,100 lbs). The red section on the bottom of the scale indicates no tongue weight (0 lbs). A tongue weight of at least 500 lbs is recommended for the built-in shock absorption to function effectively. This means that the scale's white indicator marker should be in the green section when you hook up your trailer to tow.
GH-1024 GenY Hitch Adjustable Torsion Drop Hitch with Pintle Lock for 2" Hitch Receivers - 5" Drop/Rise - 10K
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Alternate product found
Customer Reviews
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs - 325-GH-1024
Average Customer Rating: 4.9 out of 5 stars (92 Customer Reviews)
Insert this shock-absorbing, adjustable mount into your hitch to get 4 stacked 2" receivers. Flexing rubber cords limit shock. Tongue weight scale shows if the load needs to be adjusted. 2" Ball, 2-5/16" ball, and pintle hook included.by: Scott10/27/2023
This hitch is amazing!!! Be prepared though it is very heavy! I love how easy it is to adjust to different heights and ball sizes with the 2 common sizes provided. The scale on the back can be helpful to let you know if you have the proper trailer weight. The more you use it the more you will like it!
by: Nathan08/20/2022
Love the height adjustment for all 3 of my trailers suuper solid, I get compliments all the time when people see it "wow that things stout!" Keeps the trailer tongue from excessive bobbing, the pins it came with are a huge improvement from the standard Bobby pin style I was used to. Over all I do not regret a dollar spent and would highly recommend to anyone looking for an initial purchase or upgrade their tow life
by: Daniel 02/16/2023
Having the built in tongue weight indicator is a true benefit. The torsion movement of the receiver absorbs harsh hi-way road conditions.
I had no problems pulling 10,000 plus miles, with trailers weighting #8,000 to #1000. Would highly recommend this receiver.
by: Justin 03/09/2023
Best hitch iv come across makes a world of a difference
by: Ken D.07/31/2020
I bought the hitch because I frequently tow my 24 foot toyhauler down some pretty rough stretches of interstate highway. Its the kind of highway that when a trailer is attached to your truck, it drives the tow vehicle up and down like a fast yo-yo. I think the hitch helps a little but not nearly as much as I had hoped.
by: Spencer 02/18/2021
Bought this hitch a year ago for my new car hauler trailer. I used a standard hard hitch for a few months before deciding to bite the bullet and purchase this hitch. This completely eliminated the hard bumping the trailer would give the truck on some of the rough roads in Missouri
by: 03/09/2023
Came quick. Haven't used it yet but will do asap!
by: Jacob 09/17/2020
Holy heavyweight...this hitch is stout. I think it will serve me well for years on all applications that I use.
Shipping was fast. Ordered on a Friday and was here Wednesday I paid for the 4 day as I was moving soon and wanted to be sure it would arrive.
by: Ralph 09/04/2020
Great product. Just the ticket for getting my trailer level and getting rid of all that bumping and rattling. Built to last too.
by: Joe S07/08/2020
Very, very quality hitch. It does the job excellently. It is heavy though so consider a hitch handling device. -Joe
by: Matthew06/01/2022
I have friends with these so I got one. Very happy. Works great with a boat or my car hauler.
by: George 10/20/2020
Just got this, looks are amazing. Fit and finish top of the mark. I wish it would fit on my work truck. I will modify my bumper, so it will work.
by: Craig 04/29/2021
Being new to hauling a trailer I was very impressed with the education provided by etrailer. Thank you for the time you spent.
by: Thomas06/24/2021
This thing is heavy duty. Should do exactly what I wanted
by: Chris06/14/2023
by: Mark 09/27/2022
by: James 08/31/2022
by: Bill 06/02/2023
by: William 08/28/2022
by: Adam 08/04/2022
by: Brian 02/03/2022
by: Steve03/30/2023
I just received the hitch and installed it but have not had a chance to pull with it. It appears to be very well made and is a heavy hitch at 118lbs. I have a 45ft coach and pull a 16k stacker trailer so will see how it does. Will update in a couple of weeks.
by: R S10/23/2023
I pull a 22k stacker trailer with about 3000lb of tongue weight with a class A pusher with a custom receiver hitch that I had built for it. Decided to try the gen y after talking with someone else who swore by it. After driving cross country I can say it improved the ride quality dramatically. Worth every penny
by: Mary Anne09/27/2023
THis is our second Boss hitch they are wonderful and function just as designed to smooth out the impacts between the truck and rig. Had a slight issue with the first delivery but E-Trailer replaced it no questions asked and two days later the new one showed up and the UPS driver took away the first. Great customer service which is very rare these dasys.
by: Sanders02/28/2024
Extremely well built and pulls the trailer amazingly but is extremely heavy
25
92
Show More Reviews
See what our Experts say about this Gen-Y Hitch Trailer Hitch Ball Mount
- Cushioned and Adjustable Ball Mount for 2020 Ford Expedition Towing Trailers up to 7.5kThe Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 is a great and safe choice for a ball mount for your 2020 Ford Expedition. This has more capacity than you'll need, has the two more popular hitch ball sizes, is adjustable in height, and is cushioned so it'll give you a really great towing experience as well. Most report improved fuel mileage with these over standard ball mounts as well. The other thing you'll want is a brake controller (if you don't have one already)...
view full answer... - Solution to Smooth Out Ride of 2011 Forest River Rockwood Ultra Lite 33 foot Travel TrailerOne option that might help is the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024. This is a cushioned ball mount setup that basically gives the ball mount connection of the trailer suspension. This uses torsion springs to vertically cushion the front of your trailer where it connects to the vehicle. It will smooth out the ride noticeably and strangely enough Gen-Y has told us that people get better fuel mileage when they use this as well. Check out the review video I attached...
view full answer... - Combining Gen-Y Torsion Hitch With Equal-i-zer Weight Distribution Hitch SystemRather than looking at separate systems you can use the Gen-Y Torsion Weight Distribution Shank # GY54FR to combine with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control # EQ37101ET. This will give you the smoother ride and retain the sway control and weight distribution you have with the Equal-i-zer hitch. A Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 will not provide you with sway control that is best to have with large trailers. The Equal-i-zer hitch...
view full answer... - What Torsion Hitch Do You Recommend To Tow A Car Hauler With My 2017 Dodge Durango AWDAfter reading your question I am assuming you are talking about a hitch with weight distribution. That is the question I am answering. I think the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs, part # 325-GH-1024, will meet your needs. This is a shock absorbing hitch receiver. It has up to a 5" rise/drop and it comes with a 2" and a 2-5/16" ball mount. Please keep in mind that the maximum tongue weight you have to adhere to is the lower of the...
view full answer... - Is There a Way to Cushion Bounce in RV Camper that has Torsion Spring SuspensionSince your 26 foot Mini Lite Rockwood has torsion springs we don't have a shock kit for the trailer we can recommend to cushion the ride of it but we do offer a cushioned ball mount option that will prevent a lot of the bounce from the trailer transferring to the tow vehicle. The Gen-Y Torsion 2 Ball Mount # 325-GH-1024 would work great for this. It has torsion springs built into the ball mount which allow the vertical bounce that would get transferred on the tongue weight of the trailer...
view full answer... - Gen-Y Weight Distribution System for Different Tongue Weights and Compatibility with Torsion Hitch?For your Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 the Weight Distribution System for Gen-Y Ball Mounts with 2" Receivers has been discontinued and will fit if you have it but is rated for 1,000 to 1,400 lbs total tongue weight. That total tongue weight is the loaded tongue weight of your trailer along with any cargo behind the rear axle of your tow vehicle. The issue with this particular pairing is the limitation of your 10K receiver as you stated. The solution is...
view full answer... - Recommended Shock Absorbing Shank For A Husky Centerline Weight Distribution Hitch Your Husky Centerline WDH isn't going to be compatible with the Shocker XRC Cushioned Adjustable Drop Ball Mount # SHK22ZR because it needs a solid shank to mount to. You would the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024, which would allow you to insert the shank of your Husky Centerline WDH into the stacked receivers. The shock-absorbing design ensures a smooth, steady ride by functioning like a torsion axle to limit transfer of road shock from trailer to vehicle...
view full answer... - Compatibility of Stacked Receiver Ball Mounts with Weight Distribution SystemsIt looks like you want to add the torsion mounted ball mount to your 2018 Silverado and yet want to be able to keep you Equal-I-zer weight distribution system. The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 16K # 325-GH-1224 will work very well with that setup. The stacked receivers are able to use any weight distribution system utilizing the ball mount just like a receiver tube. If you want a stacked receiver without the torsion or at a different weight...
view full answer...
- Gen-Y Torsion 2-Ball Mount VS Curt Rebellion XD For Towing 4,000LB Boat TrailerSince you have such a light boat trailer I recommend the Curt Rebellion XD # C83WR. This will work better with the lighter amount of tongue weight that you have of 400lbs. The hitch will also be much easier to use for you as it weighs only 43lbs compared to the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 which is more than double that at 71lbs. The Gen-Y will still work but for optimal performance out of their hitch they want to see 500lbs of tongue weight. The Curt...
view full answer... - What is Causing Back and Forth Bucking on Jeep WranglerWhile you can use the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 with a Roadmaster tow bar like the StowMaster # RM-501 it will not be a solution to fix the back-and-forth bucking you are encountering with your Wrangler. Does your Jeep have a supplemental braking system? If not then that would be the solution, and if you do have one then it may not be working as well as intended. I have added a link to a help article on supplemental braking systems for you to check out...
view full answer... - Can Gen-Y Torsion Ball Mount Be Used To Flat Tow 2021 Jeep Wrangler and Carry Stow Away Box?I would be happy to help! The Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs # 325-GH-1024 is a great option for attaching the Blue Ox Avail Tow Bar # BX7420 to your 2021 Tiffin Wayfarer with a 2" receiver, and it will give you a smoother ride. With that said a standard non-cushioned ball mount like the # 325-GH-324 would be just fine, as the torsion-flex technology would be a bit over kill for what you are wanting to do. This option would would...
view full answer... - SumoSprings Kit that Can be Used on Gooseneck Trailer with 7,500 lb AxlesFor your gooseneck trailer that has 7,500 lb capacity axles the SumoSprings kit part # SS33HR would work great to provide additional support. They would also hold up just fine when you are loading the trailer as well.
view full answer... - Is There a Tongue Weight Range for Gen-Y Torsion Adjustable Ball MountsThere are ideal tongue weight ranges for the Gen-Y Torsion ball mounts like the part # 325-GH-1224. If you tow a trailer with too low of a tongue weight the torsion spring won't flex as much so the ride quality wouldn't be as ideal. The part # 325-GH-1224 is for tongue weights higher than 1,000 lbs but less than 1,700 whereas the part # 325-GH-1024 (same in every other way) is for tongue weights between 500 and 1,100 lbs. Sounds like your tongue weight is 1,200 lbs which for that you'd...
view full answer... - Compatibility of Weight Distribution System with Gen-Y Torsion Ball MountA Gen-Y Torsion ball mount like # 325-GH-1024 can be used with a Curt MV weight distribution system. You will put the weight distribution system shank in one of the stacked receivers and that will give you a smooth ride and still give you the stability. The Curt MV Weight Distribution System # C17052, # C17063, and # C17422 are the options we have for the specific tongue weight. You want your trailer tongue weight to be within the middle of the range for the appropriate system.
view full answer... - Can the Gen-Y Torsion 2-Ball Mount Be Used with Weight Distribution and Sway ControlThe Gen-Y Torsion 2-Ball Mount part # 325-GH-1024 is a great heavy duty ball mount option for towing. If you have a weight distribution system then there is another version of this same shank that is designed to accept a weight distribution head, the Gen-Y Torsion Weight Distribution Shank part # GY54FR. I did a review on this if you would like to see what I thought, the video is attached below.
view full answer... - How Much Weight is Needed for Gen-Y Torsion 2-Ball Mount Shock Absorption to FunctionThe Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 requires a minimum of 500 lbs of tongue weight for the built-in shock absorption to function. This ball mount is intended for tongue weights that are 500-1,100 lbs. So you are correct, without enough weight the system will not function as intended. The Gen-Y has a built in scale to help you balance your trailer, which will also indicate if the weight is too little. If you tow trailers that have a tongue weight in this range...
view full answer... - What is the Tongue Weight Range for 10K Gen-Y Torsion 2-Ball Mount w/ Stacked ReceiversThe torsion action on the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1024 is designed for trailers with a tongue weight of 500 lbs - 1,100 lbs so if you were to tow a lighter trailer using this ball mount then the torsion part would simply not operate and you would essentially be using a fixed ball mount. So really the only bad thing about this is using a hefty ball mount for a lightweight trailer but if you plan on just leaving this on your truck then you don't really have...
view full answer... - Gen-Y Hitch Additional Lifetime Warranty for Rubber Torsion HitchesThe Lifetime Warranty Option on the Gen-Y Torsion 2-Ball Mount # 325-GH-1024 or any Rubber Torsion Hitch, can only be purchased through the Gen-Y Website. You are allowed to purchase the product from any certified Gen-Y dealer which we are so you will be able to add the Lifetime Warranty from Gen-Y on their website.
view full answer... - Recommended Product to Improve Ride Quality of 11,000 lb Horse TrailerIf you're using the Andersen weight distribution hitch with the chains, it wouldn't work well with the Gen-Y # 325-GH-1024 ball mount you'd looked at as it would have more effect on the ride of the tow vehicle and minimal effect on the ride of the trailer itself. Plus, Andersen couldn't say if their weight distribution system was compatible with the Gen-Y hitch as they haven't been tested together. I'd concentrate on the suspension of the trailer itself. To improve the ride of the trailer,...
view full answer... - What do you Recommend for a Class 3 Cushioned Ball Mount Rated for 7,500 lbs. Without a RiseI have two really good options for you that offer a zero rise. The Draw-Tite 2-Ball Mount for 2" Hitches part # 80796 has both a 2" and a 2 5/16" ball and is rated for up to 16.000 lbs. It does not have the cushioned feature you asked about but gets the job done. For the shock absorption you want the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers part # 325-GH-1024 this also has the 2 and 2 5/16" balls and is perfectly suited for your trailer and tongue weight assuming it is 10-15% of...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Jacob T
Video Edited:
Zach D
Installed by:
Cole B
Installed by:
Michael B
Installed by:
Aidan B
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Manda E
Written by:
Alexander C
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.