Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
(664 reviews)
Price: $142.70
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
Item # T20BTR-EZ-6048
Our Price: $142.70
- All Info
- Reviews (664)
- Q & A (0)
- Photos
Dexter Trailer Axles - T20BTR-EZ-6048
- 2200 lbs
- 60 Inch Long
- 48 Inch Long
- Spindles Only
- No Drop or Lift
- Leaf Spring Suspension
- No Hubs
- Dexter
- Easy Lube Spindles
Round trailer axle beam measures 60" from hub face to hub face (when hubs - sold separately - are mounted) and 48" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).
Features:
- Round axle beam acts as part of your trailer's suspension system
- Replace an axle on your trailer
- Fabricate a suspension to fit your application
- High-strength steel construction
- Bend in axle creates zero camber angle for even road-to-tread contact across the width of your trailer's tires
- Best for straight-line acceleration and steady, controlled towing
- Underslung design - spring seats welded to underside of axle for mounting leaf springs (sold separately)
- Low ride height makes it easier to load and unload your trailer
- Straight, EZ-Lube spindles - no drop
- Built-in grease zerk for simple lubrication
- Spring seats and spindles are welded on
- Limited 2-year warranty
Specs:
- Weight capacity: 2,200 lbs
- Hub-face-to-hub-face length: 60"
- Spring-center-to-spring-center length: 48"
- Tubing outer diameter: 1-3/4"
- Spindle size: 1-1/16"
- Spindle/Hub compatibility:
- Bearings: L44649 inner, L44649 outer
Axle Dimensions
There are multiple ways to measure the length of an axle beam, but the hub-face-to-hub-face and spring-center-to-spring-center lengths are the most accurate. Hub face (A) refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam).
The spring center (B) is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on.
If you are replacing your trailer's axle, you should be able to figure out which type you need by determining your trailer's capacity, the bolt pattern of your wheels, the brake type and the aforementioned lengths.
Dexters
Dexters are made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs (sold separately) can mount beneath the axle. The result of this underslung design is a trailer that rides a bit lower for quick and easy loading and unloading.
Each axle is manufactured to create a certain camber angle. This ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer's tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load.
T20BTR-6048-EZ Dexter Replacement Axle Beam - Easy Lube - 60" Hub Face - 48" Spring Center - 2,200 lbs
Customer Satisfaction Score:
86% were satisfied with this product
14% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs - T20BTR-EZ-6048
Average Customer Rating: 4.8 out of 5 stars (664 Customer Reviews)
Round trailer axle beam measures 60" from hub face to hub face (when hubs - sold separately - are mounted) and 48" from spring center to spring center. EZ-Lube spindles make it easy to lubricate bearings (sold separately).by: Kent 03/05/2024
Very nice axle and delivered quickly
by: Mike 06/01/2023
Couldn't have done better. Quick shipping, perfect fit. Customer support was knowledgeable and helpful.
by: Paul M09/16/2014
Dexter Axle is a direct drop in replacement for a bent one. Arrived quickly and had protectors on the ends.
Old hubs fit nicely but order at least inside bearing seals it is important for the ez lube to work well they not leak. and you'll need to remove them to repack the inside bearings anyways.
by: Rich C.10/07/2016
I rarely write reviews or respond to requests to review purchases but in this case I feel I must. The items I purchased to repair my very old and nearly defunct boat trailer were just exactly what was needed. Not only did everything fit perfectly but the price was unbeatable!! I would definitely purchase here again. Thank you for great quality products at a very reasonable price.
by: Jean A02/23/2021
As usually quality of produce,, delivery, and packaging was superb! Bad weather did get in the way of delivery so I was delayed a few days...until the original delivery day estimated when the package shipped.
I did have one concern...it is not a deal breaker...it looks like a splatter from the welder ended up on the spindle between the machined surfaces where the bearings run. I think I can file it off without impacting the function of the axle. This one got by quality control...
by: Jim 08/06/2021
Worked great for a harbor freight trailer replacement. I had to weld a little to make it fit but so far it’s hauling my firewood out of the mountains nicely.
by: John04/02/2015
What a great product, packaging was simple yet effective. It's a great deal, can't wait to order for etrailer again. They fixed a problem I had with order (100% my fault) and made it easy to get the right part. I love these guys!
by: Marty C.11/04/2016
Axle fit perfect and solved my tire wear problem. The price was terrific.
by: Lewis08/04/2021
Looks great. Fast delivery compared to [online retailers] which lost this part and didn't let me know until 3 weeks later. Needed this part asap.
by: Mark11/17/2021
Fast shipping. Axle was poking out of the box, but no damage to the axle.
by: Mark07/18/2019
Excellent product and service!
by: Brett08/30/2022
by: Emily05/21/2021
by: Lawrence08/30/2021
by: David 04/08/2023
I called to confirm fitment and availability. I then place the order on line on Wednesday and the axle showed up Friday evening. You can not beet that! Local suppliers where about $75.00 more and I had to go pick it up an hour each way!
by: DICKY FROM WAIPAHU,HI01/23/2024
THANKS ETRILER FOR TAKING CARE MY ONLINE ORDER THE DEXTER TRAILER AXLE WAS PERFECT FOR MY NEW INSTALLATION I DONT NEED TO WORRY ABOUT THE EXTRA LOAD ON MY BOAT TRAILER
by: Douglas03/30/2024
I replaced the noodley Lippert axles that bent on my utility trailer. Much better. They also have the proper bend in them for the load compensation. I took the part number off the Lippert axle, and etrailer was able to cross reference the part numbers for perfect fit.
by: John04/26/2024
You were great to the way you help me resolve my problems. The axle is the correct one I needed. Just one small thing I found that it was missing two mounting studs.
by: Alfredo03/02/2024
Check your order! I specifically ordered Dexter axles and they sent me generic ones.
by: Mike B.11/14/2016
I inherited an aluminum trailer that ended up needing a complete overhaul and etrailer was the best resource I could have found. After researching extensively to find out what I needed and watching their videos on how to do it I ended up ordering an EZ-lube axle, galvanized hubs, springs and a hanger kit (in other words everything from the frame down).
Everything shipped quickly and arrived in great shape. All the parts worked perfectly and I couldn't be happier!
by: George M.09/08/2019
etrailer had the best prices and excellent customer service, Thanks Ian! Shipping was fast and free to boot. I bent the front axle on my in-laws fifth wheel camper and this axle fit the bill. I had to order a set of spring seats and weld them to the opposite sides. The original seats were at 68.5 " centers and that configuration was unavailable anywhere.
by: Louis04/19/2024
I'd like to thank odella and Kate for taking such good care of my order.
I first talked to Odella and had to break off the conversation for something else called back and Kate took my call and was able to fulfill the order and take all my information very nice dealing with the company that has their people in the United States and you're not talking to a computer!
Also was really shocked I received the order 2 days early really good work!
by: Kenneth11/04/2017
Axle arrived in perfect condition, was also an exact fit for my Top Hat Trailer.
Your staff was of great help finding my right axle.
I would recommend etrailer to everyone.
by: Roy10/31/2020
After a rust related axle failure, my equipment trailer was down. (If you roll in the rust belt, check your axles near where the brake wire goes through)
After checking my local source, I was told there was a long lead time for new axles due to the pandemic.
I was so happy to find etrailer. They had the exact axles I needed. After I pulled the axles I realized I also needed hardware and u-bolts.
Everything arrived ahead of schedule, allowing me to get back up and running quickly.
Thank you etrailer. You are a valuable resource.
by: Kevin06/22/2019
Perfect fit, nice axle and fast delivery. I liked it so much I ordered another a day later to replace the front axle. My 30 yr old tandem trailer's axle broke at the wheel, so I went to a local store which doesn't stock them anymore. Could of ordered a so so axle for $94 + $28 shipping and wait 2 weeks but needed it fast. I went to a major trailer sales & service shop and told "maybe we could get one for $250" with no call back. I decided to check out etrailer and was surprised to see Dexter axles that fit my trailer for $140 with FREE shipping in 3-4 days! Ordered Sat. night, got it Wednesday afternoon, and installed it (with brakes) in an hour. Only problem I had was determining if spindles would fit my hubs. They stated "1/16th spindle" and must be industry talk but french to me. So I had to look up bearing #'s they listed to check bearing sizes to make sure they fit my hubs. A little more time but not a deal breaker. The best part was the huge difference in ride with just one new axle. Always had bouncing loaded or not, but now with just one axle the ride is smoother no load and with my 4000 lb tractor on it. Can't wait to get the 2nd axle on that arrived today. First two pics show the difference between the old straight axle and the new dexter axle. The third is a pic of my 2nd axle, oh well. Etrailer is my new go to place for trailer parts. I have 7 trailers.
25
664
Show More Reviews
See what our Experts say about this Dexter Trailer Axles
- Can Electric Brakes Be Added to Dexter 2,200lb Capacity Idler AxleBrake mounting flanges like part # 4-34 could be welded to the axle you referenced. The spindles are compatible with the L44649 wheel bearings. If you needed a hub with a 4 on 4 bolt pattern, use the # 8-173-16UC3-EZ hub drum and the # 23-47 and # 23-48 brake assemblies. You'd also need 4 nuts # 6-17 and # 5-8 lock washers per brake assembly. If you needed a 5 on 4-1/2 bolt pattern, go with the # 8-257-5UC3-EZ hub drum along with the brake assemblies and hardware mentioned above.
view full answer... - Replacement Axle for Harbor Freight Trailer 4x8 Foot 1195 lb CapacityThe Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 will fit any trailer with spring seats 48 inches on center. If you Harbor Freight trailer has leaf springs that are 48 inches on center then you will have a perfect fit. You will want to note that the hub face to hub face will be 60 inches. If those dimensions are not a fit, then you may want to consider using the CE Smith Trailer Axle w/ Idler Hubs - EZ Lube Spindles - 5 on 4-1/2 - 57-1/2"...
view full answer... - Is There A 60" Hub Face Axle That Will Allow Me To Use A 6 on 5-1/2" Wheel Hub?I have a couple options that may help you to get the correct hub size as there is not one that is a direct fit for the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-6048. First the #84 E-Z Lube Spindle w/ Brake Flange # TRU74FR can be welded on in place of the smaller spindles that come on the Dexter axle. This will give you a spindle that is traditionally found on a larger 3,500lb axle and allow you to use the 6 on 5-1/2" Trailer Idler Hub Assembly # AKIHUB-655-35-EZ-K....
view full answer... - Upgrading Agricultural Spindle or Axle for 5 on 4-1/2 Inch Bolt Pattern Hub AssemblyUnfortunately the 0.69 inch measurement of the LM11749 is not a bearing we carry. Your trailer has a unique agricultural spindle that we don't have the replacement bearing or compatible hub for. Your best option is to replace the axle or at least the spindle with the BTR E-Z Lube Spindle for 2,000-lb Trailer Axles - 1-1/4" Diameter # TRU44FR. This will be compatible with the Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2 - Galvanized # 8-258-50UC1 you referenced....
view full answer...
- Overall Length of the Dexter Axle # T20BTR-EZ-6048I went out into our warehouse and measured the outside to outside length of a # T20BTR-EZ-6048 we had in stock and found that distance to be 65-3/4 inches. I measured from the end of the zerk fittings that are on the outsides of the axles.
view full answer...
- Can EZ Lube Hub be Replaced by Non-EZ Lube HubThe only difference between EZ lube hubs and non-EZ lube hubs is the dust cover/cap on the hub. The EZ lube hubs have a rubber plug you can pull out whereas the non-EZ lube hubs have a cab without a cover. You don't even have to remove the zerk fitting if you don't want to. Best option is to grease by hand and not use a Bearing Buddy in my opinion as they typically allow people to overfill the hubs which eventually blows out the grease seal. I attached a video that covers packing hubs...
view full answer... - Dimensions of the Spindle of the Trailer Axle part # T20BTR-EZ-6048The Axle part # T20BTR-EZ-6048 that you referenced has the BTR spindles on them which have the following dimensions: 1.00 inch for the threaded portion 1.06 for the inner bearing surface 1.06 for the outer bearing surface 1.50 for the seal inner diameter surface
view full answer...
- Replacement Trailer Axle for a Carry On 5x8 Foot Utility TrailerWe may not have a straight axle solution but we do have axle-less options. I have included a link to them for you. The great thing about these systems is that they have the suspension built in, sort of like a torsion axle. And ground clearance is improved because there is no axle hanging down. We carry the most common sizes of straight axles in the lower capacities but axles can literally be any size so its tough to carry them all. If none of the straight axles we have will fit and you...
view full answer... - Compatible 2,200 lb E-Z Lube Axle, Hub and Drum and Electric BrakesThe 2,200 lb capacity Dexter Trailer Idler Axle Beam with EZ-Lube Spindles # T20BTR-EZ-6048 is not compatible with the hub and brakes you referenced, so it will require a couple of different parts, though you can use Brake Mounting Flange # 4-34. The axle has BTR spindles so you would need Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles # 8-173-16UC3-EZ which are compatible with 7" x 1-1/4" brake assemblies. For that you will need the Dexter Electric Trailer Brake Kit...
view full answer... - Can E-Z Lube Hubs be Installed on Trailer Axle Without E-Z Lube FittingsE-Z Lube hubs like # 84550UC1-EZ that you referenced are intended for use on axles that are equipped with E-Z Lube spindles. They feature removable plugs that pop out to provide access to the grease zerk fitting in the end of the spindle. Adding an E-Z Lube hub to a regular axle will not provide the E-Z Lube functionality but if the bearing set is the same as your original hubs then they may be used as substitutes but without the E-Z Lube feature. The idler hubs you referenced use bearings...
view full answer... - Replacement 2200-lb Axle for LoadRite Single Axle Boat Trailer Model 5S-17220090TThe specs for the LoadRite boat trailer model 5S-17220090T show a weight capacity of 2200-lbs. I could not find your specific trailer model number 5S-172200V on their website. Often you can find a sticker or plate on the trailer's axle that indicates its weight rating. If you can confirm the 2200-lb axle capacity then you can refer to the linked page that displays the 60-inch and 72-inch axles we offer with this capacity. We have kits with just the idler axle such as part # T20BTR-EZ-6048...
view full answer...
- Converting a Mobile Home Axle to 5 on 4.5 PatternI have a possible solution for you but, mobile home axles are typically very difficult to change over because the manufacturer uses odd sized parts to assemble them. Once they go bad its more trouble than its worth to replace specific items, especially the spindles. It is difficult to find replacement parts for a mobile home axle because they were designed for one time use only. Unfortunately, there isn't a kit for something like this. I recommend getting a new standard trailer axle...
view full answer...
- Which Hub Assembly Fits the Dexter Idler Axle Beam with BTR SpindlesI have a solution for you, but the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 has a BTR spindle that requires hubs with # L44649 bearings; the Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased # AKIHUB-545-2-1K uses # L44643 bearings. Instead, you'll want to use something like the Dexter Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 # 8-258-5UC1-EZ, which uses # L44649 bearings...
view full answer... - Is There a 5 x 100 Lug Pattern For Hubs For 2,200 lb, 60 Inch Trailer AxleTrailer hubs do not come with a 5 on 100 lug pattern so unfortunately it just isn't an option. You can still get some cool looking wheels with a standard 5 on 4-1/2 bolt pattern hub like the Trailer Hub Assembly # 8-258-50UC1-EZ which fits the Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048. For example something like the Viking Series Valhalla Trailer Wheel # AX02455545BMFL, Sendel Series T07 Black Machined Trailer Wheel # AM25DR, or Liger...
view full answer... - Does Dexter Trailer Idler Axle Beam # T20BTR-EZ-6048 Come with Grease Fittings InstalledYes, the spindles of the Dexter Trailer Idler Axle Beam # T20BTR-EZ-6048 are EZ lube spindles so it comes with the zerk fitting installed already.
view full answer...
- Choosing the Correct Axle for my 7 x 16 Cargo Trailer.To find the correct replacement axle it is very straight forward. You want to know the Axle weight rating. This is going to be on the sticker found on the cross tube of the axle if this is not present measure the axle tube diameter and that can help us identify it. Then you want two measurements. The first is the hub face to hub face. So the measurement between where the the rims touch the axle hubs. The second is the distance center to center on the spring seats. Or where the springs meet...
view full answer... - Parts Needed to Install 2,000 Pound Round Axle Under Leaf SpringsIn order to mount the round 2,000 pound axle under your trailer's leaf springs, we will need to piece together an over-under kit for the 1-3/4 inch outer diameter of the axle. The Dexter Trailer Springs Over-Under Conversion Kits that you referenced are made for axles with a 2-3/8 inch round axle # K71-384-00 or 3 inch round axle # K71-385-00. The Dexter 2,200 pound straight axles have a 1-3/4 inch outer diameter. I have attached a link to all of the 2,000 pound axles we offer. To mount...
view full answer... - Requirements for Replacing an Axle on a 5X8 Haulmark Utility Trailer To get you a replacement axle compatible with your trailer, you can use a universal fit axle-less system like the Timbren # A35RS545E which comes ready to mount to your trailer frame and has the brakes, hubs, EZ-Lube spindles and suspension all integrated. You simply need to add a 2 inch square bar between the assemblies (not included) cut to the custom length needed. You simply need to know the capacity desired, so I've linked the page to all your options. If you want to replace your...
view full answer...
- Recommendation on a 2,000 Lbs EZ Lube Axle Configuration for a Trailer I have a solution for you for a trailer axle that will give you the EZ Lube spindle feature. Instead of the traditional tube axle, I recommend you look at on of the Timbren Axle-Less Suspension Systems, like # A20RS545. The Axle-Less system will mount to trailers frame and this system can be used in a tandem axles setup is desired. Timbren does not recommend using this system in a triple axle configuration. The Timbren system will allow you to install an independent suspension system with...
view full answer... - 60 Inch Axle Compatible with 6 on 5-1/2 Inch Idler HubsThe Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs # T20BTR-EZ-6048 is not compatible with the Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 6 on 5-1/2 # AKIHUB-655-35-EZ-K. If you are looking for an axle that length with a 6 on 5-1/2 bolt pattern, then you will need to use the Timbren Axle-Less System # ASR1THDS02. This will allow you the custom length when utilizing a 2 inch square bar (not included) cut to length in the integrated holes of the...
view full answer... - Solution for 60 Inch Replacement Axle For Hubs With L44643 BearingsThe CE Smith # CE13110 is designed for 2,500 lb axles with # L44643 bearings. All of our available 60" axles use # L44649 bearings. The only solution would be to switch to hubs with the same bolt patter that use # L44649 bearings. The Dexter Trailer Idler Axle w/ Idler Hubs # 20440I-EZ-60 that you looked at would work as a replacement assuming you only need a 2,000 lb capacity. For a 2,200 lb axle we have the # T20BTR-EZ-6048. Since this doesn't come with hubs you will also need # CE13109...
view full answer... - Can the Dexter Trailer Axles # T20BTR-EZ-6048 have the Spring Seats Moved to Top of AxleWe don't sell the Dexter Trailer Axles # T20BTR-EZ-6048 with the spring seat on top of the axle so that it could be installed overslung. But, what you can do is get the # TRSS175 and then have a qualified welder install this spring seat on the top of the axle so that you could install it in the configuration you need to.
view full answer...
Do you have a question about this Trailer Axle?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Lindsey S
Updated by:
DeAnne T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Mike S
Updated by:
Carrie F
Installed by:
Jeff D
Installed by:
Randy B
Video by:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.