Can Electric Brakes Be Added to Dexter 2,200lb Capacity Idler Axle
Question:
Can a pair of flanges be welded to this axle to be mount electric brakes? Im planning an aluminum bodied motorcycle towed camping trailer, and want to experiment with using electric brakes. Outside of the normal trained professional/objects in mirror/your mileage might vary caveats, can a flange for an electric brake be welded with enough space left over to mount the electric brakes and drums?
asked by: James M
Helpful Expert Reply:
Brake mounting flanges like part # 4-34 could be welded to the axle you referenced. The spindles are compatible with the L44649 wheel bearings.
If you needed a hub with a 4 on 4 bolt pattern, use the # 8-173-16UC3-EZ hub drum and the # 23-47 and # 23-48 brake assemblies. You'd also need 4 nuts # 6-17 and # 5-8 lock washers per brake assembly.
If you needed a 5 on 4-1/2 bolt pattern, go with the # 8-257-5UC3-EZ hub drum along with the brake assemblies and hardware mentioned above.
Products Referenced in This Question
Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Axle Beam with EZ-Lube Spindles - 60" Long - 2,200 lbs
- Trailer Axles
- Leaf Spring Suspension
- Easy Lube Spindles
- No Hubs
- 2200 lbs
- Spindles Only
- 48 Inch Long
- 60 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Brake Controller
- Shop: Dexter Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs to 2,200 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb E-Z Lube Axles - 7" Diameter - 4 on 4
- Shop: 7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Search Results: etbc7
- Shop: Dexter Trailer Hub and Drum Assembly for 2,000-lb E-Z Lube Axles - 7" Diameter - 5 on 4-1/2
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Shop: Trailer Wiring
- Video: Spectro Wiring SWC5362-1 Review
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Q&A: Comparing Manual and Automatic Resetting Circuit Breakers for an Electric Winch
- Q&A: What Amperage Circuit Breaker Should be Used for Brake Controller Install
- Search Results: jacketed 2 wire 14 gauge
- Search Results: breaker
- Search Results: grease
- Search Results: 14 ga wire
- Search Results: 40 amp circuit breaker
- Search Results: 4 pin to 7 pin
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Replacement Hub for Triton Snowmobile Trailer
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Q&A: Can Trailer Brakes be Wired Directly to Brake Light Circuit
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Video: Curt Echo Mobile Trailer Brake Controller Installation - 2012 Toyota 4Runner