Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs
(215 reviews)
Price: $7.03
In Stock
Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs
Item # SR15-C
Retail:$7.99
Our Price: $7.03
You Save: 12%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (215)
- Q & A (0)
- Videos (2)
- Photos
Brophy Tie Down Anchors - SR15-C
- D-Ring
- Tie-Down Cleats and Rings
- 1600 lbs
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Surface Mount - Bolt-On
- Brophy
Medium Duty Trailer Tie Down Lashing Ring
- Steel with a zinc finish
- Capacity: 5,000 lbs
- Safe Working Load Limit: 1,600 lbs
- Diameter of mounting holes: 7/16" x 7/16"
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
SR15 Trailer D-Ring Tie Down, Bolt-on, 5K
Video of Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Brophy Trailer D-RIng Tie Down Review SR15-C
Today we will be taking a look at the Brophy trailer bolt-on D-ring tie down, part number SR15-C. The Brophy D-ring can be a great solution for adding an additional anchor point to your trailer or truck bed. It's made out of a strong steel construction with a zinc finish so it's going to resist rust and corrosion. It's got a 5,000 pound weight capacity and it's got a 1,600 pound safe working load limit. The diameter of the mounting holes is 7/16ths of an inch and the distance between the two holes is going to be 2-1/4 inches. The entire base measures 3-1/2 inches long and it's going to be 1-3/16ths wide. The D-ring itself is a nice 3/8ths of an inch thick and it's going to be 2-1/4 inches long. Now that we've gone over some of the features let's go ahead and show you how to install it.
We've got our generator on our trailer here today and we just want to tie it down. We've got a D-ring on this side of our trailer. What we was is our Brophy ring as an additional anchor point. I'm going to go ahead and place it right here as my desired location and then I'm going to mark those holes out. Once we've got those marked out go ahead and remove the D-ring, that way we can drill those out.
Then we will grab our D-ring. We are going to place it over our holes to make sure everything is all lined up. You will need to provide your own hardware. We are just going to use these two bolts here today, along with two nuts, and two washers. We will go ahead and place those through, then I'm going to go underneath and put the nut and washer in place.
I'm going to go ahead and take the nuts and washers and hand tighten them down. Once I get them both in place I'm going to have a buddy go up there and ratchet them down while I hold them in place. That's going to do it. Now with our D-ring in place the only thing left to do it to put it to good use. Take our strap, run it through, and tighten that down. All right.
We are all set to do. That's going to complete our look at the Brophy trailer bolt-on D-ring tie down, part number SR15-C. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs - SR15-C
Average Customer Rating: 4.9 out of 5 stars (215 Customer Reviews)
by: Matt06/08/2022
Exactly what I needed as a secure tie-down to the frame of my pickup bed. I'm able to use ratchet straps to haul hay, other large loads and tighten them as tight as possible without the anchors pulling out. Part of the system when I felt very intelligent for having all the pieces to haul home large farm equipment.
by: Steve J06/24/2017
The home we bought in Nov has a deck and patio door that get full sun in mid-to-late afternoon. I was looking for strong rings I could bolt on 4x4 posts to suspend shade cloth as a solution... found large surface-mount D-rings at Home Depot, but they're costly and bulky. Via Google search, I found your company's D-ring products with smaller size, but same strength. They're exactly what I was looking for... reasonably priced, strong D-rings that mount with two 3/8" carriage bolts. They arrived yesterday... mounted two, so far...
Steve J.
6/24/2018
Your D-ring tie-downs look brand new after enduring multiple severe Nor-eastern storms on Cape Cod. I just re-hung the sun shades over our deck, and your product makes that simple, straight forward and secure. Couldnt be happier. I expect them to be in service for many years to come!
by: Richard11/29/2019
I made two purchases for D-Ring 1600+ lb WLL tie downs; one for eight D-rings for my utility trailer and six for my motorcycle lift.
The SR15-C is a strong device with large enough opening to use multiple hooks or tie-thru straps or ropes which is common when securing my ~1,000 lb Goldwing on the trailer.
I now have zero concerns my tie-downs will ever fail. Of course, one must use appropriate straps for the weight as well.
etrailer.com was on-the-ball via email checking on my deliveries yet failed to catch it when my second order was lost in shipment for 5-7 days and failed to respond to my return emails when I attempted to inquire.
When I called them, they were polite and efficient yet had no response to why no answers to my email inquires and would not put the recorder on a fast-trac delivery w/o me paying the extra fees.
Bottom line: product is great value for a solid product and hopefully etrailer.com will rectify their communications challenges.
by: Bruce05/28/2016
These D rings work great, easy to install and a good price. etrailer has a great selection and fast shipping.
Bruce
5/29/2017
Still working great no problems or issues.
by: John B10/13/2016
I received my order of the D rings just a couple of hours ago. I went straight to the hardware store and picked up some bolts, washers and locking nuts.
Installed them on my brand new "Sure-Trac" 5 X 10 trailer in about an hour. They seem to be very solid and should definitely secure whatever I lash down to them. I told the guy at the hardware store I wanted either stainless or nickel hardware. He said it was "nickel" and I hope that's what I got. While I don't plan on exposing my trailer to road salt, it's not totally outside the realm of possibility. I don't really want any dissimilar metal corrosion either. I hate rust. I could only go with 3 stars as I haven't used them yet or seen how the finish holds up when exposed to weather over time. If they don't corrode I'll definitely upgrade my review to 5 stars.
by: Sonny Evens07/15/2017
Another great product offered by etrailer these hold downs are everything there supposed to be. Bought these with intentions of using bolts but ended up welding them on. These are galvanize coated, so these process is not recommended. Great product don't have to worry about things when they are strapped down.
by: Wabes02/10/2024
Never used it yet, got it to put me in free shipping on an order. It’s heavy duty
by: Russell 07/14/2023
Ordered several of these to use as tie down points on my trailer. These work very well for my equipment. They are made very well and take a beating. Great product!
by: Robert03/23/2015
These are high quality, bought 6 of them. First mounted them on top of the wood planks of my trailer but then ended up mounted them on the outside metal rail because the wood was to soft even being 2x6's. Very solid and sturdy, I used 3/8 carriage bolts to mount them
by: DD03/03/2016
Easy to install, a 3/8" carriage bolt will fit the mounting holes . I got a couple of the larger D rings (1/2" diameter ring) and they're too big I think for a 800 lbs ATV I attached a pic for comparison
by: howardnevada10/10/2018
The coupler lock works as advertised and the etrailer measurements were perfect. The tie down brackets were also easy to install and work well for holding down my ATV and UTV. The spare tire carrier, wheel and cover all came from etrailer. They fit perfectly.
by: Butch B06/25/2013
I was looking for something to replace the totally useless tie downs in my 1999 F-150 truck bed. I saw these D-rings and thought this might work; and am very glad I tried them. They are listed as 2 1/4" ctr holes and the truck is 2" ctr holes; the bolts on the truck tie downs in the bed of the truck are smaller than what you would use if you just installed these D-rings in a normal install; so they fit with NO drilling or cutting out. the only thing I had to do was put some washers on the bolts, the heads are too small and would pull through the holes in the D-ring bracket otherwise. The solid D-ring (welded) does not pull apart when I put pressure on them, pulling up, and the only thing I'm worried about is putting to much pressure (pull) on them and breaking the bolts (screws) that come in the truck bed stock! I looked several places to find out what other people are doing to their trucks to correct this problem and no one has come up with this solution; it works try it!
Butch B.
12/30/2014
The D ring tie downs are like brand new, after a year. I use them all the time and have had other people look at them and ask about them. I have a cover on my truck bed so the D rings are protected from the weather. I would highly recommend these for the purpose that I am using them. Most people will use them on or in their trailers but if you need a really good replacement tie down for your truck bed side tie downs these are great!
by: Ray F09/23/2017
I purchased 2 of these to mount on the wood floor of my enclosed snowmobile trailer to help secure snowmobiles and dirt bikes (depending on the season). I used a backing plate and am happy with these units. With a backing plate, I feel there is no way the bolts will pull through the wood floor in case of an abrupt stop or accident. The "D" rings are large enough to easily hook a tie down strap to and fold flat when not in use.
Ray F.
9/24/2018
The tie downs are working perfectly. No issues and I would buy these again. Sturdy and well built.
by: Jay Hanig10/21/2013
I am very satisfied so far with the d-rings; they are very heavy duty. Now the only question is how well they will hold up living in the bed of my garaged truck at the beach.
I mounted them with stainless hardware; I'm hoping electrolysis won't be an issue.
Mine are mounted on the floor of my Ford Ranger's bed: two immediately in front of the rear wheel bump out and the other two on the bed on either side of the tailgate, as far back as I could get them. 3/8"-20 carriage bolts work perfectly with the square bolt openings on the strap portion of the tie down.
Jay H.
10/21/2014
OK, its been a year and my d-rings look as if I installed them yesterday. Im completely satisfied. If anything, I wish I had a couple more to mount in between the other two pairs of rings. You cant have too many places to hook bungees and the floor is the best place for them.
by: Mark 03/11/2023
It is so nice to go to EMAILER and order one specific D ring tie-down anchor! Thanks EMAILER! Little things like this are what keep me coming back! Wonderful!
by: David04/13/2018
I would not ever consider buying tires anywhere else than etrailer. Your 5 star tires,service and follow up are wonderful.
by: Nate01/12/2017
I just received the D-Rings I ordered but haven't installed them yet. Looking at them they are exactly what I expected based on the product description and photo. I'm confident they will be more than strong enough for my application. Pleased with my purchase. Did not rank 5 stars for the following reasons: shipping took a day or two longer than expected, weld on D-rings aren't consistent and some don't look great (hoping they are still strong enough), haven't installed or used them yet (no feedback on actual strength or wear & rust).
Nate
1/12/2018
A year later and the D-Rings are still awesome. Zero rust or signs of wear. I just used them again yesterday.
by: Lloyd 03/17/2023
ok tiedowns
by: Thom G.07/02/2013
Easy to install in my trailer floor with a couple of galvanized carriage bolts, lock washers and nuts. I also added a metal plate to each Tie-down, on the bottom-side of the floor, where the carriage bolts passed through so as to create a greater grab surface area for the washers and nuts underneath...in case I need to tie-down heavy,unstable, or movable loads.
by: Dave 10/02/2020
Heavy duty and shipped quickly! Will be great as tie-down points for my 800 lb motorcycle on a trailer.
Dave
10/3/2021
A year after installation and being in the elements, they’re still perfect. No rust and strong as ever.
by: wcdu06/10/2016
Picked up a HD utility (6,000 lbs) trailer and decided that I should prep it for towing my 2016 Kawasaki Teryx, say 1350 GVW. I ordered 8 of the 1,600 lb Tie down anchors to use with my Mac's Custom wheel nets. They installed easily and performed as advertised on the test haul. Tomorrow will be the first serious haul but I am confident.
I was able to put at least one bolt through a frame member for each of the tie downs. This actually made backers more complicated in that I had to use a number of different "jury-rigged" backers. I am sure I over did it but what the heck. If it is worth doing, it is worth doing right.
I think it is great you offer the tie downs without hardware in that every application can be different. Your S&H was prompt and the package arrived a day before expected.
Kudus yet again to etrailer.com! One should always look to your site first. Sorry no pictures as I live in a poor ISP area and my upload speed is slow and usually shuts down the whole works. I will be in the "big" city in a week or so if you want to send me a tickle.
by: Steve H.01/08/2015
I purchased 6 of these and had them welded to the inside angle iron that attaches to my ladder rack on the back of my truck.. They were exactly what I wanted, in size and work load capacity. Local dealers only had the 1/4" or the large 1/2". They "ve held down cabinets, off road motor bikes, refrigerators and large bulky cargo with "O" problems. E trailer was very helpful answering all of my questions. I highly recommend them.
by: Jim M03/20/2014
Purchased and received 6 of these tie downs. I had them shipped economy and still received them in just a few days. I needed more variations/locations to connect straps to on my utility trailer floor and these worked out very well. these definitely heavy duty. I used 3/8" galvanized carriage bolts, flat washers, lock washers and nuts. I added one more extra item....I made metal back plates for the underside of the trailer to make it overkill which I am known for.
These are very nice and will definitely do the job.
by: Todd G05/01/2017
Sturdy enough. Got 4 for the price of one at local box store. Great value and fast shipping!
by: Howard S08/08/2017
I bought these tie downs a year ago to add securement points in my enclosed trailer. I often haul my 870 pound motorcycle and use these tie downs. They are very strong, easy to attach to, don't get in the way, and do the job well in holding a heavy motorcycle secure. These are the perfect securement devices for my situation, and I don't hesitate to recommend them.
25
214
Show More Reviews
See what our Experts say about this Brophy Tie Down Anchors
- Where do I Install D-Ring Tie Downs on a 6x10 Wood Bed Utility TrailerYou can attach D-Ring Tie Downs most anywhere on a trailer. You need to select the location based upon what you need to tie-down. When possible, it would be best to drill through metal to install the rings. You can mount them to the wood planks, but they will not be able to bear as much weight. Over time as the wood rots, you can end up with the rings pulling out of the wood. Whenever possible, going through the metal frame of the trailer or using a steel backing plate would be the best...
view full answer...
- Options for Carrying a 600 lb Scooter Behind an RVSince the trailer hitch on your RV has a towing capacity of 5,000 lbs, it is safe to assume that it has a 500 lb tongue weight. Trailer hitches are almost always designed to have a tongue weight rating that is 10 percent of the towing capacity. I would not recommend carrying your scooter with a hitch mounted carrier on your RV. In fact, most hitch mounted motorcycle/scooter carriers are not recommended for use on motor homes or RVs because the trailer hitch is further away from the rear...
view full answer... - Installing D-Ring Surface Mount Tie-Down Anchors on a Aluminum Snowmobile TrailerThe Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs # SR15-C are steel anchors with a zinc finish. Although the zinc finish will help avoid galvanic corrosion from dissimilar metals, the connection by drilling into the aluminum frame is not the best option. It is true the frame will typically be a stronger connection point than the wood deck, but in this case the wood is a better option when secured close to the frame yet not touching it. A good option...
view full answer...
- What Size Carriage Bolt Works With Brophy Trailer D-Ring Tie DownWhen installing the Brophy Trailer D-Ring Tie Down, part # SR15-C, you will need a 3/8 inch carriage bolt. The square underside of the carriage bolt will fit inside the mounting holes of the tie down. I have attached a photo of the SR15-C with the dimensions noted.
view full answer...
- Recommendations to Tie Down Various Vehicles on Car HaulerTo secure vehicles in your 16 foot car hauler, I recommend using the Erickson Adjustable Ratcheting Wheel Net w/ Hooks # EM58522. These will fit 14 inch to 29 inch tires and includes 2 inch cam buckles to allow the webbing to be shortened or legnthened. These have an individual safe working load limit of 3,333 pounds - so when used on all four tires, they will have more than enough capacity for the maximum 5,000 pound car you are hauling. You can then install the Brophy D-Ring Tie Down...
view full answer... - Type of Fastener Needed to Install Brophy Trailer D-Ring Tie Down # SR15-C on Wood Trailer DeckThe Brophy Trailer D-Ring Tie Down # SR15-C has a 7/16-inch square opening for the shank of a carriage bolt. This would be the ideal installation method but you certainly could substitute a different type of fastener, say a 2-inch wood screw, if you think that would be adequate for your load requirements. The full 5000-lb break-strength rating of this tie-down would require carriage bolts.
view full answer... - Is There a Thickness Requirement for Installing Brophy D-Ring Tie Down Anchors SR15-CThe Brophy D-Ring Tie Down Anchor # SR15-C that you referenced does not have a thickness recommendation for attaching to a steel floor. Basically any steel that would be thick enough to work as a trailer floor would be adequate.
view full answer... - Overall Dimension Of Brophy Trailer D-Ring Tie DownI have attached a photo of the Brophy Trailer D-Ring Tie Down, part # SR15-C with the dimensions all noted. The overall dimension of the D-ring is 2-1/4 inches and the inside width of the D-ring is 1-1/2 inches.
view full answer...
- Recommended Trailer Hitch for a 2009 Nash 21-5R 5th Wheel TrailerFor your 2009 Nash 21-5R 5th Wheel Trailer, I recommend using the Adjustable Width Trailer Hitch Receiver part # 13703 which fits trailers that have frame rails spaced between 22" - 72" apart. This hitch has a Class III rating with a 2" receiver tube opening which allows for up to a 3,500 lb gross trailer weight (GTW) and a 350 tongue weight (GTW). If you will be using the hitch for any non-towing applications like a bike rack then you will also need to use the support strap part # 18050...
view full answer... - Availability of D-Ring Trailer Cargo Control Tie DownsWe offer D-ring tie downs like the bolt-on Brophy # SR15-C and the weld-on Curt # J-705 that can be seen on the linked page. For one close to your measurements you might consider the Brophy # LRB1 which is also a bolt-on part whose dimensions are shown in the linked photo.
view full answer...
- Recommended Tie Down Anchors For 14" Tall Solid Sides On 5' x 14' Utility Trailer Adding the Erickson Horizontal E-Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1 # E19148 you were looking at to the sides of your 5' x 14' utility trailer would be a great option for giving additional tie down points if you are constantly hauling loads that are different lengths. With this you can add the Erickson E-Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs # E59143 where ever you need for your straps. Now if you are hauling loads that are the same size, using...
view full answer... - Thickness of Brophy D-Ring Tie Down Anchor SR15-CThe overall thickness, or diameter, of the Brophy D-Ring Tie Down Anchor # SR15-C is 3/8 of an inch. I have added a diagram for you below showing all the measurements of the anchor; it is 2-1/4 inches tall and when mounted to the D-ring, the space inside will be approximately 1-1/2 inches. I have added a couple links below to video reviews for you to check out as well of the Brophy D-Ring Tie Down Anchor # SR15-C.
view full answer...
- How To Use Stabilizing Straps On The Curt Hitch # 13703 Mounted On A Komfort Travel TrailerThe Curt Adjustable Width Trailer Hitch Receiver for RV, part # 13703, is designed to fit many frame styles on RVs and motorhomes. It can be attached to your travel trailer, but you will want to check with the trailer manufacturer to make sure your Komfort travel trailer can accept the maximum tongue weight of 350 lbs on this hitch. Since there will be significantly more bouncing at the rear of the travel trailer when it is being towed, the manufacturer (Curt) requires the use of stabilizing...
view full answer... - Installing Brophy Light Duty Trailer Tie-Down # SR10-C in a Haulmark 7 x 16 V-Nose TrailerThe Brophy Light Duty Trailer Tie-Down, part # SR10-C, mounts with hardware of your preference using two holes that are centered at 1-1/4-inch spacing. Note that the plate and D-ring are separate parts until installed. The mounting holes themselves are of 1/4-inch diameter. These D-ring tie downs have a safe working load limit (WLL) of 330-lbs each. Since it sounds like your application requires that these provide only horizontal hold (to keep the tables held firmly against the interior...
view full answer... - Can Brophy D-Ring Tie Downs # SR15-C be Welded Rather Than Bolted on as IntendedThe Brophy D-Ring Tie Downs # SR15-C that you referenced is intended for bolt-on installation. Its 5000-lb capacity rating is based on this intended installation method. However, you certainly could cut down their length from 3-1/2 to 2-inches and weld them into place but you will need to be careful to do the welding in a well-ventilated area since zinc-plated material can give off fumes that could be harmful to breathe. Also be aware that the finish of the welded parts will be discolored...
view full answer... - E-Track and D-Ring Recommendation for Securing Cargo in Enclosed TrailerI'd install e-track on the walls of the trailer so that you could use e-track tie down anchors like part # 59131 and/or e-track ratchet straps like part # EM59136. The e-tracks give you tons of flexibility in how to strap everything down since the anchors can easily be moved as needed. For e-track then you can use the Vertical E-Track # E19146 mounted throughout your trailer using self-tapping screws. I attached an install video on how to install the tracks as well.
view full answer... - Brophy SR15-C D-Ring WidthI attached a picture that has the dimension you are looking for, but the width and length of the D-ring of the part # SR15-C is 2-1/4 inches.
view full answer...
- Is Hardware Included in the Brophy Trailer D-Ring Tie Down # SR15-CThe Brophy Trailer D-Ring Tie Down, part # SR15-C, does not include any mounting bolts. I went out in the warehouse and measured the size of the holes for mounting and they measured 7/16 inch x 7/16 inch. So you will want to use something smaller than 7/16 inch.
view full answer... - How to Secure a Vehicle on an 8 X 18-foot Wooden Deck Car Hauler TrailerTo secure your vehicle on the wood deck of your 8 X 18-foot car hauler trailer I suggest you consider straps rather than chains. Straps offer lighter weight, reduced chance for scratching the vehicle and are often easier to use than chains. They also will not corrode like chains. The Dutton-Lainson 40-inch cables you referenced are intended for use with tow bars for flat-towed vehicles. We have better options for you. For example, we offer the Erickson Car Tie Down, part # 58503. It can...
view full answer... - Where is Brophy D-Rings SR15-C Made InYes, Brophy D-Rings like the part # SR15-C are made here in the USA.
view full answer... - Should Brophy D-Rings be Installed on a Metal Trailer Frame or Through the Wood FloorThe most secure place to install the trailer D-Ring # SR15-C is going to be the main frame structure of the trailer. If you choose to mount the D-Rings on the wood floor of the trailer I recommend placing a metal backing plate on the underside of the trailer for each D-Ring. This will disperse the force applied (when the rings are in use) to a wider area of the floor so less stress is on it. There isn't a specific backing plate for this D-Ring but a 1/8 or 1-1/16 inch thick 5x5 inch piece...
view full answer... - Recommended Support Plate for the Brophy D-Ring Tie Down # SR15-CWhat you have heard is correct, you do not want to mount tie downs to the wood floor of a trailer without any type of reinforcement. The tie down will only be as strong as the weakest component and the wood floor of a trailer would be the weakest component. I spoke with my contact at Brophy and she told me that they do not have a recommended backing plate that will work with this tie-down, but if I were installing this on my trailer, I would use something larger than 1-1/2 inch washers....
view full answer... - Can the Brophy D-Ring Tie Down Anchor Mount to Wall Support of TrailerIt is possible to install the Brophy D-Ring Tie Down Anchor # SR15-C that you referenced to one of the wooden wall supports shown in the photo you attached. To install # SR15-C you will want to use the longest, largest size wood screws possible for installation. If you don't already have wood screws that will work, they can be found at your local hardware store. If you wanted to drill a hole all the way through the wall, you could use bolts and nuts to secure the tie down. Installing...
view full answer...
- Can Brophy D-Ring Tie Down Anchor Mount on Aluminum Trailer FramePhysically yes, the Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs # SR15-C can be mounted onto your aluminum trailer frame. However, if you are going to do this you need to check with the trailer manufacturer to ensure that the frame is rated to hold up to what you are planning to use the D-rings for. You may also find that bolting these onto the trailer frame would void the warranty on your trailer.
view full answer...
Do you have a question about this Tie Down Anchor?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Jacob W
Video by:
Dustin K
Installed by:
Cole B
Installed by:
Hayden R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Matt L.
6/9/2023
No change - still performing as needed. I have NO concern that the D-ring attachment, bolted to the frame of my Dodge Ram 3500, will be the weak point in any rigging.