Brophy Rope D-Ring Tie-Down Anchor - Bolt-On - 2-1/4" Wide - Surface Mount - 1,600 lbs
(21 reviews)
Price: $11.08
In Stock
Brophy Rope D-Ring Tie-Down Anchor - Bolt-On - 2-1/4" Wide - Surface Mount - 1,600 lbs
Item # SS15-C
Our Price: $11.08
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (21)
- Q & A (0)
- Photos
Brophy Tie Down Anchors - SS15-C
- D-Ring
- Tie-Down Cleats and Rings
- 1600 lbs
- Trailer Tie-Down Anchors
- Truck Tie-Down Anchors
- Surface Mount - Bolt-On
- Brophy
This sturdy D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The stainless steel ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.
Features:
- Tie-down anchor provides a solid point to secure your cargo with straps or bungee cords
- Surface-mount design does not require you to cut a hole in your trailer or truck bed
- D-ring rotates 180-degrees so you can attach straps from multiple angles
- Stainless steel construction resists corrosion and retains its strength through repeated use
- Constructed of Grade 304 stainless steel
- Simple, bolt-on installation to flat surface
- Mounting bolts not included
Specs:
- Maximum load (break strength): 5,000 lbs
- Working load limit: 1,600 lbs
- Ring diameter: 3/16"
- Usable internal ring dimensions: 1-1/2" wide x 1-5-16" tall
- Mounting bracket dimensions: 1-3/16" wide x 3-1/2" long
- Distance between mounting holes center to center: 2-1/4"
- Mounting hole dimensions: 7/16" x 7/16"
- 1-Year limited warranty
Note: Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors with a WLL of 100 lbs each to tie down a load weighing 400 lbs, then you need at least 4 anchors to safely secure that load. It is recommended that you always use anchors in pairs.
SS15-C Brophy Stainless Steel Lashing Ring Tie Down - Bolt On - Surface Mount - 1,600 Pounds
Customer Reviews
Brophy Rope D-Ring Tie-Down Anchor - Bolt-On - 2-1/4" Wide - Surface Mount - 1,600 lbs - SS15-C
Average Customer Rating: 4.9 out of 5 stars (21 Customer Reviews)
This sturdy D-ring creates an attachment point for tie-down straps and bungee cords wherever you need cargo control. The stainless steel ring resists corrosion and bolts onto a flat surface. Includes mounting bracket.by: Jeff 06/03/2023
This is the second set of these stainless tie downs I’ve bought from you guys. They are great. And shipping on this purchase was lightning fast. Thanks so much for this outstanding customer service.
by: edward w07/13/2016
These tie downs are fairly large and all stainless construction. I use them in my aluminum trailer to tie down ATV's or snowmobiles.
by: James 04/14/2020
Very nice tie down anchors... I’ll be bolting these down to my utility trailer floor.... these things won’t budge or bend...they are well made....
by: Steven P09/07/2017
I was pleased with these tie-downs
by: Dean 03/16/2023
Very well built and corrosive proof
by: Dennie09/20/2017
These Tie Down Rings work great on my T railer.
by: Jim04/16/2019
Product appears to be well made. The finish is appropriate for the use. I think these will work well for me.
by: Jerry 06/26/2021
Products are great and so is the delivery. Great site for all trailer needs. Thank you.
by: Richard 04/20/2020
Perfect & Stainless is best for outdoors
by: Denny04/09/2017
Heavy duty tie-down and is excellent qu ality.
by: Brad Bilgo03/13/2017
Nice,, anything stainless is good
by: Tom V.04/21/2019
This product was just what the doctor ordered. Keeps the tarps in place hauling mulch over the highway.
by: Chris06/11/2018
Product as described, solid, I like the square holes for carriage bolts. I have recomended.
by: Ken B07/27/2016
Haven't had a chance to install them yet, but, exactly what I have been looking for.
by: Tony02/28/2019
Great product
by: Chris B10/10/2017
Excellent product high quality
by: Richard04/17/2020
Worked perfect
by: Sam m.10/28/2015
Great quality and size
by: Dillon B.06/13/2016
Very high quality.
by: William 03/05/2021
by: Matthew 06/22/2021
21
21
See what our Experts say about this Brophy Tie Down Anchors
- Could Brophy Rope D-Ring Tie-Down Anchor SS15-C Be Used with 3/4 inch Plywood3/4 inch plywood will be fine as long as it is properly installed to the floor of your trailer and your motorcycle isn't a 1,200 lb monster like a Goldwing. I would recommend using an anchor plate below the plywood like the part # e96RR.
view full answer... - Are Aluminum D-Ring Tie-Down Anchors AvailableWe do offer some aluminum tie down options but they are not exactly the d ring type. Instead they are tracks that will use steel anchors that get attached to them like the Buyers Products Super Track Kit - 4 Clear Anodized Extruded Aluminum Rails With 8 Tie Rings part # 337ST93. I have installed alot of these tracks and they work out really well and will not cause rusting issues. The tie down anchors like the Replacement Tie-Down Ring for Super Track System part # 337LR1 can easily be attached...
view full answer... - Stainless Steel D-Rings For Use to Secure Motorcycle to Aluminum Flat BedWe have the Brophy D-Ring Anchor part # SS15-C which is stainless steel and has a 1,600 lb weight capacity. If you needed reinforcement below the aluminum deck we also have the part # e96RR which would work great.
view full answer... - Availability of Tie Down Anchor that Mounts Flush on Mounting SurfaceFor a D-ring tie down anchor with a similar capacity and doesn't require a recessed mount we have the part # SS15-C which has a 1,600 lb capacity. I attached a review video for this anchor for you to check out as well.
view full answer... - Fit and Compatibility of Brophy D-Ring Tie Downs for Transporting '67 Ford Sports Coupe Weighing 3KYes, 4 of the Brophy # SS15-C Tie anchors can work to secure your 67 Ford Sports Coupe. Tie-down anchors must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the anchors being used. For example, if you are using anchors # SS15-C anchors with a WLL of 1,600lbs each to tie down a load weighing 3,000 lbs, then you need at least 2 anchors to safely secure that load. It is recommended that you always use anchors...
view full answer... - What Type of Hardware Should be Used to Install Brophy Rope D-Ring Tie-Down Anchor # SS15-CThe mounting hole dimensions of the Brophy Rope D-Ring Tie-Down Anchor # SS15-C that you referenced is 7/16 inch by 7/16 inch. Best option would be to use a carriage bolt with shoulders that match that dimension and you'd be set.
view full answer...
- Recommended Tie Downs for a Polaris RZR Side by SideYou might want to consider using Erickson ATV E-track tie down kit # EM09160 which are 6-1/2 feet long. The kit will allow you to tie down 2 tires so you can use them at the rear wheels. The straps are included. If you would rather go with D-rings such as # SS15-C I do recommend using a backing plate on the underside of the trailer floor so that the force applied to the D-Ring is spread over a larger area. You would not need that with the E-Track kit since each track is secured in 6 places...
view full answer... - Availability of Weld-On D-Ring Tie Downs for Installation on Aluminum TrailerWe do offer many weld-on D-ring tie-downs for cargo control on trailers. These are shown on the linked page. All of these items are made of steel, not aluminum. It is not easy to weld steel and aluminum (due to the two metals' different melting points) but a skilled professional welder should be able to do it. If you prefer to avoid the complication of welding you might consider the bolt-on D-rings shown on the other linked page. For example, Brophy offers various sizes such as # SR15-C...
view full answer... - D-Ring Anchor Solution for Trailer that is AluminumWe have the Brophy D-Ring Anchor part # SS15-C which is stainless steel and has a 1,600 lb weight capacity. If you are going to use this on an aluminum trailer I would recommend using a isolator to protect the dissimilar metals. Here in our shop we use gardening plastic as it's easy to work with and very durable.
view full answer... - What Grade Stainless Steel is Used to Make Brophy Rope D-Ring Tie-Down Anchor SS15-CI spoke with my contact at Brophy about tie down # SS15-C. She said it is 304 stainless steel.
view full answer...
Do you have a question about this Tie Down Anchor?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Installed by:
Cole B
Installed by:
Evangeline M
Written by:
Chelsea B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Jacob W
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jim
4/17/2020
The product has performed well for me.