Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
(79 reviews)
Price: $211.88
In Stock
Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
Item # EM58523-09162-4
Our Price: $211.88
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (79)
- Q & A (0)
- Photos
Erickson Car Tie Down Straps - EM58523-09162-4
- E-Track Strap
- Ratchet Strap
- 851 - 1200 lbs
- 11 - 20 Feet Long
- Erickson
- 1-1/8 - 2 Inch Wide
Tie-down kit has 4 ratcheting tire straps and 2 moveable wheel chocks for securing your wheeled equipment to your truck bed or trailer. The roller idlers allow you to move the ratchets away from the vehicle so it is easier to tighten down the straps.
Features:
- Tie-down kit secures a vehicle that's tied down in your truck bed or trailer
- Works great for race cars, hot rods, and other large vehicles
- Moveable chocks can be installed anywhere along horizontal E track (sold separately)
- Pull levers to quickly secure chocks to E track anchor slots
- Remove and reinstall chocks as needed
- Roller idlers allow you to move ratchets away from vehicle so that they're easier to operate
- No need to crawl under vehicle to tighten ratchets
- Position at base of tire to serve as third anchor point for straps
- Helps keep tension on straps
- Ratchet straps secure tires in place
- Sturdy ratchets help you achieve and maintain maximum tension on the straps
- Release levers disengage the ratchets when you're ready to unload
- 3 Integrated pads with ridges on either side can be adjusted along the strap for optimum positioning
- Ridges grip onto the tire tread for additional security and stability
- Allows the strap to mold to the contours of the tire for a snug fit
- Spring-loaded fittings on strap ends and roller idlers snap into E track anchor slots
- Durable construction
- Strong polyester strap webbing
- Rust-resistant zinc-coated steel roller idler and ratchet
- Yellow powder-coated steel chocks are corrosion resistant
Specs:
- Strap dimensions: 2" wide x 12' long
- Overall chock dimensions (per chock): 8-1/2" long x 6-3/8" wide x 4-1/2" tall
- Safe working load limit (WLL): 1,100 lbs
- Maximum load (break strength): 3,300 lbs
- Quantity: 4 ratchet straps with roller idlers and 2 wheel chocks
- 90-Day warranty
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
This tie-down kit helps stabilize and secure race cars, hot rods, ATVs, UTVs, and other wheeled equipment that's tied down in your truck bed or trailer. It includes 4 ratcheting straps with roller idlers and 2 wheel chocks that easily clip into horizontal E Track (sold separately).
Moveable E-Chocks
This kit comes with 2 E-Chocks. Unlike other wheel chocks that have to be permanently installed, these chocks can be quickly and easily moved to different anchor slots on E Track. This means that you can easily adjust your setup depending on what you're hauling. The spring-loaded levers on the E Track fittings let you snap the wheel chocks into place and then remove them when you need to install them into different anchor slots.
Ratchet Straps with Roller Idlers
These tire straps have built-in roller idlers that makes it easier to ratchet down the straps. The roller idlers allow you to move the ratchets away from your vehicle so that you can tighten down the straps without crawling under your vehicle. The E Track fittings on the strap ends and the roller idlers are also spring-loaded, and they easily clip into E Track anchor slots. And the zinc-coated steel construction of the roller idlers and the ratchets resists rust.
The straps also have 3 integrated pads that can be adjusted and positioned along the strap. The pads have ridges on either side, which grips onto the tire tread for additional security and stability of your equipment. And it allows the straps to mold to the contours of the tire for a snug fit.
Setup of the straps is easy. One end of the ratchet strap clips into the E Track on one side of the tire and the roller idler clips into the E Track on the other side of the tire. Then the strap is run through the roller idler, which acts as a third anchor point for the strap, and the ratchet is moved away from the tire. The other end of the strap is then clipped into the E Track. You should now have plenty of room to operate the ratchet and tighten down the strap.
EM58523 Erickson Manufacturing Adjustable Tire Tie-Down Strap with E-Track Roller Idler Pulley - 1,100 lbs - Qty 4
EM09162 Erickson Manufacturing Moveable E-Chock E-Track Wheel Chock - Steel - Qty 2
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Erickson E Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs - EM58523-09162-4
Average Customer Rating: 4.8 out of 5 stars (79 Customer Reviews)
Tie-down kit has 4 ratcheting tire straps and 2 moveable wheel chocks for securing your wheeled equipment to your truck bed or trailer. The roller idlers allow you to move the ratchets away from the vehicle so it is easier to tighten down the straps.by: Paula03/26/2024
The tire stops do NOT fit in the E-Trac!!!
Also they are TOO TALL. I have a Porsche 911 and it DOES NOT fit under
the front end. So they are totally useless.
IF YOU HAVE SHORTER ONES THAT FIT IN THE E-TRAC, I WILL BUY A PAIR!!!!! pLEASE!!
by: Kevin 04/03/2024
Excellent strap system. With wheel chocks, makes for a very secure system.
by: Andrea02/28/2024
works better than any straps I've used in the past
by: Fileno12/01/2021
This is a heavy duty product that works well when properly used. However every application is unique so read on to see where my challenges were.
My e-track is recessed so the top is flush with the trailer floor. The wheel chocks are designed to rest on the trailer floor assuming the e-track is not recessed. However it was possible to modify the chocks with a grinder. Once that was done they work perfectly. A must have since they make loading my race car a breeze.
The straps are good but time consuming to put on. My trailer is enclosed and working the straps over the wheels requires some contortions and finesse. The rubber blocks are a challenge to fit between the tire and outside edge of the fender because of the lack of clearance. If you are first time e-track user be sure to double check you're locked in. Three of my straps popped off the first time! If your car's tires don't center on your e-track make sure you get the strap at least over the center of the tire. I've had straps slide off the tire during transport. Note that my tires are slicks so there is no tread block for the strap to grab. It would be terrific if there was webbing that could prevent that possibility.
Fileno
12/2/2022
After a year of use the straps are still doing their job. With use, Ive learn to load and tie down the car much faster. Sometimes I thread the straps through the wheels to ensure they cant slip off.
by: Alvin 01/05/2024
easy application
by: Phil 02/17/2023
Shipping was incredibly fast! Order was on my front porch 34 hrs from the time I placed order.
Ordered wheel straps and E-track wheel chock kit to go out of town to pick up a brand new car in my trailer at a dealership in another city. Quality of products looks great but I won't be using for about another week or so once car comes in. I will send another review with pics once I have put them to use
by: Gary 09/29/2023
Great products, And have everything and have everything you need for towing.
by: William 01/25/2020
These straps work great. They are quality materials and hold the cars tires as advertised with the rubber stoppers. They shipped out fast and free. I am very happy with the team at etrailer.com
William
1/27/2021
Great!
by: bdmeyersc10/10/2021
This is the second time I have purchased this system. Both times they work flawlessly. When people seem my with this holding my Side by Side down to the trailer, they always ask where tog et them from. It beats the heck out of the sloppy attempts at strapping down with ratchet straps. With all four wheels strapped down to the e-track on my trailer, I am certain if I ever flipped my trailer on the side, the trailer and SxS would stay secured together. Its a very easy way to feel secure carrying your equipment on a trailer.
by: John12/31/2020
I LOVE these tie downs and chocks! Good quality hardware and straps. Takes just minutes to tie down my Honda Pioneer 1000 to the E-track mounted on my trailer. The chocks are awesome because I can adjust them depending on how I want to distribute the weight on my trailer.
by: Patrick07/05/2019
I normally do not give feedback or write reviews. I felt compelled to do this. If you are trailering a Corvette with the E-TRACK system this is the product you want!!!! I had two other tie down products I tried 1st that came with the trailer and both would have done damage to me Vette. EM58523-09162-4 seems to have it locked down safely. I'll be back in 3000 miles with the performance review. Thank you Carol for your help! Less than a week to arrive was a plus also.
by: Lee 06/12/2023
Everything was received and works great. Thank you.
by: Kevin 10/18/2022
Great straps and excellent customer ser vice.
by: Oscar 07/26/2021
Great product! I no longer throw my car out of alignment by using straps to D rings on wheels.
by: Dan 02/25/2023
Great products and fast service!
by: Stan 12/09/2021
A package was delivered very fast. The order was a very smooth transition from the trailer to my home. I would definitely recommend again
by: Eddie 07/23/2021
Have not used this set as yet. Have purchased these before for another trailer. Excellent quality and perfect fit.
by: Thomas 02/07/2021
Excellent product. Video available to help explain installation of system was very helpful
by: Todd 08/10/2022
These work great!!!
by: Erich10/29/2021
Very happy with the product would recommend your company
by: Andre02/19/2022
Easy to use. Very sturdy.
by: Artur01/09/2020
I am very grateful for the excellent service and timely delivery within 4 days. I recommend to everyone. excellent ratio price-quality-delivery time.
by: Keith09/28/2020
Work perfect, easy to use.
25
79
Show More Reviews
See what our Experts say about this Erickson Car Tie Down Straps
- Can E-Tracks be Used to Secure Car to TrailerYes, there's even an e-track wheel chock setup with the Erickson E-Track Tie Down Kit part # EM58523-09162-4 that you can use to secure a vehicle to E-track. You'd need two sets of these for each car.
view full answer... - What Size Track Needs To Be Used With the Erickson E-Track Tie-Down KitThe Erickson E-Track Tie-Down Kit part # EM58523-09162-4 can be used with any size track. The correct size would come down to applications which is no something I can advise on. The tracks simply need to be long enough for the tire to sit on and have mounting points directly in front and behind to attach the tie-downs. Therefore, you could either have two long tracks or four short for a vehicle. I have attached an entire list of the lengths we offer below. In regards to strength, they...
view full answer... - Best E-track Coating For Corrosion Resistance On Open Car Hauler TrailerI have found the galvanized coating on the etrailer Horizontal E-Track # e95VR will hold up to rust and corrosion better than the zinc coated Erickson Horizontal E-Track # EM19147 that you were looking at. The galvanizing process leaves a thicker coating as compared to zinc coatings. This will allow for it not to wear off as quickly. I recommend using the Erickson E-Track Tie-Down Kit # EM58523-09162-4 for securing your vehicles when using the E-Track. This kit will give you 2 wheel...
view full answer... - Backing Plates And Wheel Straps For Securing Vehicles In Enclosed Trailer With E-TracksYes we do have backing plates for the e-tracks. I recommend going with etrailer E-Track Backing Plates w/ Hardware - Galvanized Steel - 6" Long x 6" Wide - Qty 4 # e66RR which is a nice kit that includes 4 plates and all the necessary hardware. For wheel bonnets to secure your Honda Talon, I recommend going with the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs # 77314. These straps have the E-track fitting so you can use them with your current setup. This fits most tires...
view full answer...
- Recommended Wheel Tie-Downs For Securing a Jeep Wrangler To a Trailer For TowingI find using the Erickson E-Track Tie-Down Kit # EM58523-09162-4 makes for the simplest way to secure your 2019 Jeep Wrangler to a trailer. This kit provides you with 4 ratchets with roller idlers and 2 wheel chocks. It is designed to mount to etrailer Horizontal E-Track # e62VR which will also allow for different vehicle lengths and tire sizes to be used. The etrailer E-Track Backing Plates w/ Hardware # e66RR allows you to mount them on surfaces up to 2" thick.
view full answer... - How Far Apart Should E-Tracks be When Using Wheel Chocks for SXSIt will vary from vehicle to vehicle but basically you'd want to center the e-tracks under the center of the tires to use the e-track wheel chocks like part # EM09160 or # EM58523-09162-4.
view full answer... - Can Wheel Nets or Wheel Straps be Used With Wheel Chocks on E-TrackYou can use either wheel nets or wheel straps with the Erickson E-Chock Wheel Chock for E-Track # EM09162 (this is a quantity of one strap but can be ordered in a pair at part # EM09162-2). I recommend the Erickson Adjustable Wheel Net with E-Track Fittings - 1,166 lbs # 77314 or Erickson E-Track Wheel Tie-Down Strap with Roller Idler and Ratchet - 2" x 12' - 1,100 lbs # EM58523. For a kit I recommend the Erickson E-Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel...
view full answer... - Etrack Wheel Strap/Chock Setup to Secure 35 inch Diameter Tires of Side by SideThe Erickson E-Track Tie-Down Kit w/ 4 Ratchet Straps with Roller Idlers and 2 Wheel Chocks # EM58523-09162-4 would work great but does require e-track under the side by side tires like with the part # e25VR. This setup is definitely long enough to easily secure your side by side.
view full answer... - Recommended Trailer Tie Down System For Hauling Vehicles In an Enclosed TrailerFor your Dodge Challenger I recommend using the Erickson E-Track Tie-Down Kit # EM58523-09162-4. With this kit you get 4 e-track wheel straps that will provide you a great way of securing your Challenger. The straps will be easier to route around the outside section of the tires as you mentioned the Challenger sat very close to the ground. The straps will hold all 4 tires is place securely. This will allow the suspension in the Challenger to move freely which will be better over those...
view full answer... - How is the Working Load Limit Calculated on the Erickson EM58523-09162-4?I spoke to Erickson and they were very informative. That being said, the Breaking Strength and Working Load Limit will be the same for every manufacturer with the basic rule to ensure safety of 3:1. So with the # EM58523-09162-4 having a breaking strength of 3,300 pounds, the safe working load is therein 1,100 pounds. I did also ask if they had anything similar to these in a higher capacity, but they do not have anything at the moment. The e-track connections do limit the maximum weight...
view full answer... - Tie-Down Recommendation for Bulldog Winch Ratcheting Wheel Tie-Down StrapThe Bulldog Winch Ratcheting Wheel Tie-Down Strap # BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your application I recommend installing the Brophy D-Ring Tie Down Anchor w Backing Plate # RR5K for your anchor points since you want them to be directly in-line with your tires and not offset like your current tie-down anchors. The Brophy kit mentioned above comes with a backing plate and installation...
view full answer...
- What Length of E-Track to Use with Erickson E-Track Tie-Down Kit You could get by with 4 foot sections of e-track like the # EM19147 with the wheel chock setup part # EM58523-09162-4.
view full answer...
Do you have a question about this Car Tie Down Strap?
Info for this part was:
Edited by:
Tyler C
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Alex H
Written by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
12/2/2021
I think a wheel net like item # 77314 would benefit you greatly.
Helpful Links
p-77314.html