Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long

See what our Experts say about this CURT Hitch Adapters

• What Hitch Adapter Allows Me to Use the 1-1/4 Inch Yakima Dr. Tray on a 2-Inch Hitch?
  I have a solution for you. If you are trying to use your 1-1/4" Yakima Dr. Tray with on a 2-inch hitch receiver, the 2" Shank Adapter for Yakima Ridgeback or FullTilt Bike Rack 8890298 unfortunately will not fit. This is because this adapter is specifically made for Rideback and Fulltilt racks manufactured before November 2015. Also, I am sorry to say that Yakima does not carry a similar 2-inch adapter for the Dr. Tray. With that being said, there is still a way to use the Dr. Tray on...
  view full answer...
• Availability of Hitch Adapter to Go From 2 Inch Hitch to 1-1/4 inch Hitch
  Yes we do have hitch adapters to go from 2 inch to 1-1/4 inch hitches with the part # C45770. We do not have any hitches at this time for a 2022 Lexus NX 250.
  view full answer...
• Do You Sell a 2-Inch Hitch Adapter for a 1-1/4 Inch Bike Rack?
  If you have a Yakima Buckhorn 4 1-1/4" bike rack (which is discontinued from Yakima), I recommend the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770. With this adapter, you will be able to use your 1-1/4" Buckhorn on a 2-inch receiver. It is important to note that using this adapter will reduce your hitch's weight capacity by 50 percent.
  view full answer...
• Thule T2 Bike Carrier Replacement Shank
  If you have a 2 inch hitch on your 2020 Mazda CX-9 and use a hitch reducer # C45770 then this shank # 753370902 for the Thule T2 will work!
  view full answer...
• What 2" to 1-1/4" Hitch Adapter do You Recommend for Use on My 2021 Ford F-350?
  For a hitch adapter, the only adapters we have for a 2-inch hitch is to convert it to a 1-1/4" opening. If this is the adapter you need, I recommend the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770. This is the shortest adapter we carry for 2" to 1-1/4". It is important to note that this adapter only works with Class III 2 inch receivers. We do have a slightly longer adapter that works for all class sizes of 2 inch hitches. That is the Hitch Adapter...
  view full answer...
• Is There a Curt 1-1/4" Receiver Hitch for 2007 Hyundai Veracruz
  While I do have a solution for you, there is not 1-1/4" hitch that will fit your 2007 Hyundai Veracruz. I do, however, still recommend the Curt Trailer Hitch receiver 2" # 13545 for your Veracruz. In order to have a 1-1/4" receiver you simply need an adapter. I recommend the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770 for your needs. This will allow you to use any 1-1/4" accessories you may have. I have attached a video review of the adapter for your...
  view full answer...
• Hitch Pin Holes on Draw-Tite Hitch Do Not Line Up
  The Draw-Tite hitch has one set of holes for your hitch pin to go through. There is an extra hole on one side in case you decide to use the optional Tow Ready # 63201 J-pin lock set and anti-rattle device instead of a standard hitch pin. While I am not right there to see the issue, I suppose it is also possible that your bike rack has a 1-1/4" square shaft that you are trying to put in a 2" receiver. Most 1-1/4" bike racks come with an adapter for 2" receivers. If yours does not you could...
  view full answer...
• What 2-Inch Class III Hitch Do You Recommend for a 2006 Nissan Murano?
  If you still need a hitch installed on your 2006 Nissan Murano, I recommend the Curt Trailer Hitch Receiver # 13571. The Curt Receiver has a class III rating, and will be able to handle 3,500 pounds of gross towing weight and 350 pounds of tongue weight. As far as construction, the Curt hitch will be able to take a beating either on or off-road. The hitch bolts securely to your Murano's frame and comes with all installation hardware included. As far as an adapter, you will not need an...
  view full answer...
• How Can I Use a 1-1/4" Accessory on a 2-Inch Hitch for My 2022 BMW X3?
  By saying you have a 2022 BMW X3i, I assume you mean either a 2022 BMW X3 xDrive30i or the sDrive30i. You are correct that we only have 2-inch hitch receivers that are available for all models of 2022 X3. Although, there is a way to still use your 1-1/4" Class II accessory. For that route, I recommend using the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770 along with the Curt Hitch - 2" # C13387. With the adapter, you create a compatible 1-1/4" receiver...
  view full answer...
• Is There a 2" Hitch Reducer Adapter That Can Be Retracted
  I do have some great 2" to 1-1/4" trailer hitch reducers but none of them retract into itself. There are option that offer an extension like part # C45770 but these also reduce capacity. If you need the extra capacity then you'll want to use part # HT02 which is just a simple reducer adapter without extension.
  view full answer...
• Does the Yakima Hold-Up 2 and Yakima Two-Timer use the same tongue assembly?
  Unfortunately the tongue of your Yakima Two-Timer is different from your Yakima Hold-Up 2, so they cannot be interchanged. I have included pictures below that show the difference. Your best option is two get the Yakima HoldUp EVO bike rack, part # Y02480. It is an 1 1/4" bike rack that can hold all sized bike tires. Then you would get a the Curt Trailer Hitch Receiver Adapter, part # C45770, This will reduce your 2" hitch receiver to an 1 1/4". It will allow you to put your rack on each...
  view full answer...
  
• Recommended Solution to Reduce Hitch on 2020 Lincoln Corsair From 2" to 1-1/4"
  I have a solution for you, but I don't recommend using any adapter that extends the hitch away from the vehicle similarly to the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770 since those will reduce the tongue weight capacity of your hitch by 50%. Instead, I recommend using the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02, which won't reduce the tongue weight capacity but will still reduce the 2" receiver down to a 1-1/4". This will allow...
  view full answer...
• Recommended Trailer Hitch Adapter Compatible with Thule T2 9045 Bike Rack and 2 Inch Receiver
  For your Thule T2 Classic 2 Bike Platform Rack - 1-1/4" Hitches # TH9045 there is not a an adapter compatible for a 2 inch hitch from Thule and they also don't have the replaceable shank to upgrade to the 2 inch receiver. The best adapter to fit your truck is the Curt Trailer Hitch Receiver Adapter - 2" to 1-1/4" - 4" Long # C45770. This will allow you to use the hitch lock that came with your bike rack and then you will use a separate hitch lock like # 63232 to secure and lock the...
  view full answer...
• Recommended 2 Inch Hitch Adapter for Yakima DoubleDown
  The Replacement 2" Hitch Adapter Sleeve for Yakima TwoTimer Bike Rack # 8880519 is only compatible with the TwoTimer. Yakima did make a replacement 2" adapter for the DoubleDown, but it has been discontinued. Although this will not work for your bike rack I do have a solution. The best way to use your 1-1/4" accessories on your 2" hitch is with a hitch reducer like the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770. Keep in mind, the use of this adapter...
  view full answer...
• How to Use Rola Convoy with 1-1/4 Shank on 2012 Jeep Liberty with 2 Receiver
  There is not a specific adapter for the Rola Convoy 9307 to adapt to a 2" receiver but you can use a hitch reducer sleeve like the Hitch Reducer 2" to 1-1/4" Trailer Hitch Receiver # HT02 to make the 2" hitch on your 2012 Jeep Liberty into a 1-1/4" receiver. I prefer this to an extension type adapter because it uses the existing receiver and does not extend away from the cross tube significantly, so it won't reduce your tongue weight by 50% like the # C45770 would.
  view full answer...
• Will Curt 2 Inch to 1-1/4 Inch Adapter Work With Dr. Tray Bike Rack
  Technically yes, the Curt Trailer Hitch Receiver Adapter - 2" (Class III) to 1-1/4" - 4" Long # C45770 will work with your Yakima Dr. Tray bike rack, though the adapter will reduce the tongue weight of your hitch by 50%, and the Dr. Tray instructions say not to use the rack with a hitch extender or adapter. So I have to recommend against using an adapter per Yakima, and there isn't a way to assess the strength of the shaft of the rack. Will it probably be just fine, especially since you...
  view full answer...
• Two E-Bike Rack With Ramp For Class III Hitch - 2019 Ford Escape
  Thank you for your feedback! I've got a solution for you. While we offer quite a few hitch racks that are compatible with your e-bikes, it sounds like a ramp is pretty important to you, which narrows the field a bit. While I don't have the complete specs of your trailer hitch, it's likely that you have a Class III hitch installed on your 2019 Ford Escape with a 2" receiver, with a tongue weight capacity of at least 300 lbs. The Yakima # Y36FR bike rack comes with that ramp you're looking...
  view full answer...
• Recommended 1 1 /4" Hitch Expander to Be Able to Use the Thule T2 Pro XT
  Hey Kenneth, so it looks like you should be able to use the Curt Trailer Hitch Receiver Adapter # C45770. This adapter would go into your 1 1/4" hitch and expand it to a 2" opening so you can use the Thule T2 Pro XTR Bike Rack for 2 Bikes # TH83JV. Just be aware that whenever you use a hitch adapter like # C45770 you will lose approximately 50 percent of your hitches overall capacity.
  view full answer...
• How To Use Thule T2 Classic For 1-1/4 Receiver TH9045 In 2 Trailer Hitch Receiver
  I have another option for you, but you are correct that the Thule Shank # 853-7292 you purchased does not fit your Thule T2 Classic Bike Rack with a 1-1/4" Shank. There is not a replacement shank available to convert your rack to work with the 2" version. Instead you will need the Curt Trailer Hitch Receiver Adapter # C45770 so you can use the anti-rattle hitch lock included with your bike rack, and then use the # 63232 to secure the adapter to your trailer hitch receiver. Keep in mind...
  view full answer...
• Trailer Hitch Options for 2021 Cadillac XT5 1-1'4" or 2" Receiver
  I do have a solution for this, while currently no one makes a 1.25" hitch for your 2021 Cadillac XT5 we can offer a Reducer # C45770 with 4" extension or # HT02 with 3" of extension. They are 2 similar options with different lengths of extension. I do recommend our Curt Hitch Receiver # C13285 as it is designed to hide behind the access panel on your Cadillac. The access panel is easily removed by 2-7mm screws. And install requires no drilling or removal of body parts besides the access...
  view full answer...
• Recommended Adapter to Use 1-1/4 Inch Hitch Accessories in 2 inch Hitch Receiver
  If you have the Curt Class III hitch, part # C13119 which is a fit for the 2012-2016 Honda CR-V and you're needing a reducer so you can use an accessory meant for a 1-1/4 inch receiver, we do offer hitch reducers that can make that happen for you. In some cases, a reducer will also provide some extension, thus increasing the distance between the vehicle hitch and the hitch mounted accessory, such as the Curt # C45770. Because that distance is increased, the capacity (both towing and tongue...
  view full answer...
• Is It Possible To Fit A 1 1/4" Bike Rack On A 2" Hitch?
  The only option we have for the 2021 Toyota Venza is a 2" hitch. If you want to keep your bike rack, I recommend you look into the Curt Trailer Hitch Receiver # C89UR. This is a USA-made hitch that is high quality and easy to install, no welding required. In order to use your 1 1/4" bike rack with this 2" hitch, using a hitch adapter such as the Curt Receiver Adapter # C45770 would be a great option. The only downside to this would be that the hitch capacity is reduced by 50%. For...
  view full answer...
• How Can I Make My 2-1/2 Inch HItch To A 1-1/4 Inch Hitch
  When it comes to reducing your 2-1/2 inch hitch to a 1-1/4 inch hitch there are a couple different parts you will need. First you will need The Curt Hitch Receiver Reducer Sleeve - 2-1/2 inch to 2 inch # C45405. Then you would need to use The Curt Trailer Hitch Receiver Adapter - 2 inch (Class III) to 1-1/4 inch - 4 inch Long # C45770. When using The Curt 2 inch - 1-1/4 inch adapter will reduce your hitch's weight capacity by 50 percent. Do not use this hitch adapter in towing applications....
  view full answer...
• Trailer Hitch Receiver For 2022 Toyota Sienna For Bike Rack
  There are indeed only 2 inch trailer hitch receivers that fit your 2022 Toyota Sienna, though if your bike rack only fits a 1-1/4 inch hitch, you can use a hitch adapter and reducer. First, for the hitch, by far the best option for a bike rack for your '22 Sienna is the following: - etrailer Trailer Hitch Receiver # e56RR Not only does the # e56RR have the best bumper clearance, but it also has a matte black finish which hides the inevitable dings and scratches better than glossier finishes....
  view full answer...

Do you have a question about this Hitch Adapter?