Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're gonna take a quick look at the Thule replacement aluminum shank adapter. This is gonna allow you to convert your inch and a quarter shank on your Thule bike rack to a two inch shank. So that's gonna upgrade your shank diameter, so it's gonna git into that two inch by two inch hitch receiver.This is going to be a direct replacement from Thule for the following bike racks. It's gonna the TH945. The TH912. And TH914.There's gonna be a couple of the older style of Thule bike racks.This is gonna be made of a durable, but lightweight aluminum construction, so we don't have to worry about any rusting or corrosion.
We'll have our hitch pin hole here. That'll accept a standard five eights inch hitch pin to go through there, or you're anti-rattle bolt that came with your bike rack.And then we'll have the actually attachment location here.Now, this doesn't come with any hardware, so if you need the screw to attach that on to your inch and a quarter shank, that is sold separately. You can find that here at etrailer.com using part number 853-5787-02. That's just gonna be a little M6 by 16 millimeter flat cap screw that fits inside there. Just fits right down in place.
It'll be nice and flat so we don't have to worry about any obstruction for our bike rake itself, or for fitting our shank into our hitch.And it'll also have that nice black powder coat finish, so it'll stay looking nice, matched the rest of our bike rack.As far as our dimensions, it's gonna be 10 inches long, going from end to end. The width, of course, will be two inches, outside edge to outside edge. Our inner diameter or our inner measurement, excuse me, is that one and a quarter inch, so we can fit it over our original shank on our Thule bike rack. And then the distance from the end of the shank to our hitch pin hole, is one and nine sixteenths inches.And that's gonna do it for our quick look at the replacement aluminum shank adapter for an inch and a quarter to two inch from Thule.
Average Customer Rating: 4.6 out of 5 stars (62 Customer Reviews)
Cut tubing length to fit 1-1/2 inch Thule bike rack into 2 inch receiver
I just received and used the products I ordered from etrailer. I am very happy that the Replacement Thule Conversion Shank and screw for My Bike Rack work very well.
New car came with a larger hitch than on my old car so my 4 bike Thule rack couldn't be used. This adapter was perfect for adapting my larger hitch so I can now use my bike rack again! Outstanding product and even better service from etrailer.
Note: Do not buy the U Haul adapter for this same purpose. It allows too much wiggle between the smaller hitch and adapter that then results in too much swaying of the bike rack.
As I needed this for a Thule 1 1/4" to 2" bike rack I expected the holes to line up but like other reviewers I had to drill my own hole. Still fits a little loosely in my Curt 2" receiver but with the threaded pin it doesn't move too much. We'll see how it works when I take the bikes for a ride.
Michael L.
5/19/2015
Thank you for taking the time to leave a review. This adapter is intended for specific Thule models, and is not compatible with all models. We do not recommend modifying the product. Thanks!
I have a Thule Pathfinder hitch mount bike carrier. This adapter will work but does require some custom drilling to make it so. It would be nice if a more accurate chart or the like was available so that we could positively identify which is the correct adapter for a particular Thule carrier. We'll make this one work.
Patrick B.
10/30/2013
Replacement parts can be difficult to narrow down since so many of them are so similar. We can help with that, particularly once we know the model number of the rack. Give us a call or send us an email.
The product appears to be well made and sturdy enough although I never got to use it for the intended purpose (mounting a Thule Parkway 4 bike carrier). I have 2 vehicles with trailer hitches suited for the job.
The problem is that this shank adapter adds approx' 6" to the length of the tongue that inserts in to the trailer hitch. For my '08 F-150 that means leaving my spare tire home every time we go bike riding because the shank butts up against the spare tire (not gonna happen)!
The other vehicle is an '01 Pathfinder but the trailer hitch on this vehicle is sealed on one end preventing the shank from penetrating far enough to get the retaining bolt inserted...Strike 3 I'm out. We're selling the bike rack and for now at least just hauling the bikes in the bed of the F-150. I know that's not ideal for the bikes but in the short term I'm not ready to drop $200 for a new bike rack.
This insert, originally made for a thule bike rack, works great as an adapter to fit the type 3 trailer hitch. I had bought a Saris bike rack but the adapter that came with it is poorly designed, allowing the bike to bounce and wooble with every bump in the road. This Thule part fits the Saris insert keeping the rack sturdy.
We switched vehicles and went from the small hitch to the large hitch. This product worked perfectly to adapt our bike rack to the new vehicle's hitch. It fits tight and snug. I recommend that you order all the washers and bolts that show up on their page as suggested other purchases (maybe a grand total of $3 more but I needed a couple of them so well worth it). The part came quickly and was properly packed.
I ordered two products a couple days apart. Both orders, a locking receiver pin and a 1 1/4 to 2 inch receiver adapter, arrived on time and in good condition. The price was very competitive and service was prompt. I will certainly check retailer first if I need hitch related products in the future. Very good experience!
It was just what the doctor ordered. Thank you!
Dp
3/4/2023
This replacement part continues to serve its purpose faithfully!
I purchased an adapter to go from 2" receiver to 1 1/4 for a bike rack. Several things I liked about this adapter was it was aluminum and relieved on both sides. Why this is important is to prevent it from rusting in place if left on to long as steel on steel will.
Fit perfect, ordered the screw ( M6 x 16mm Flat Cap Screw for Thule Bike Carriers - 853-5787-02) that other reviews had recommended. Would have been disappointed (in myself) if I had not done so. This screw ties the adapter into the 1 1/4 male end.
Customer service is EXCELLENT. You can order with confidence.
The adapter is great, the service from etrailer.com was also good! The only pet peeve I have is the difficulty I had to change the quantity of the second item in my order. It was not easy during the ordering on your page. I had wanted two end caps, decided to only get one as I found it too difficult to change the quantity!
Shipping was fast!
Thanks for your help in replacing my lost parts.
Originally my Thule Bike Rack came with this adapter but it was plastic, and I had no use for it at the time and threw it out.
My new "tank" I drive came with a 2" receiver so this adapter was required. GREAT QUALITY. Much better than what originally was sent with bike rack.
etrailer also provided great feedback throughout the process regarding order processing, shipping, and shipment tracking. Would def use them again for future needs.
High quality aluminum adaptor that required additional drilling to line up the hitch, adaptor and bike rack. I expect years of service from this adaptor.
It worked OK. More my problem than yours. My Thule bike rack is an older model and not specifically listed for this adapter. With a little modification it will work fine.
This adapter is exactly what i needed to install my Thule Roadway 914xt onto my 2 inch hitch receiver. The service from etrailer, makes the shopping experience easier and smoother.
Just what I was looking for to make a better 2" to 1.25" adapter for my Curt bike rack. This was shipped on Saturday and received on Monday. Thanks for the great service.
This the 2nd one that I've needed. Requires customized holes drilled for my particular receiver but otherwise works as expected. Item delivered on time. I recommend etrailer.com.
Purchased adapter and after checkout realized that I needed this 36 cent screw.
Called customer service and the happily combined the order which arrived in 48 hours. Great fix for my bike rack and great customer service as well!
(Really should add the screw with the adaptor though)
Thx and will use the company in the future
I had a great experience with etrailer helping me find a part I misplaced. They ordered the replacement and I received it faster than they said it would take.
This product was a perfect match for my Thule 912xt bike rack. I received the item in a timely manner.
The Thule Replacement Shank Adapter (#853-7292) that was ordered fit and performed as promised. I am glad that I read other reviews and made sure to order one of the screws needed to hold the adpater in place. Product number for screw - #853-5787-02. Items were easy to order and shipped quickly!
Arrived early. Fits perfectly with Thule 914 Roadway bike rack.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Karen
2/7/2018
Thanks for reaching out. The product is still working perfectly, looks the same as it did a year ago, and allows us to use the Thule bike rack regularly. The product is significantly better than the part we bought from another retailer.