Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today in this Old Trailer, we're going to review and install the Redline Metal Loom Clamp, part number A0500. The Redline Metal Loom Clamp is a solid band that goes all the way around with two pre-drilled holes, then has a coating that will help protect the wire once you squeeze it down and secure it. Slide the clamp on, close down, and I'm going to use my self tapping screw to secure it. That will do it for the review and install of the Redline half inch Metal Loom Clamp, part number A0500 on this Old Trailer. .
Average Customer Rating: 4.7 out of 5 stars (105 Customer Reviews)
Hi George, you're welcome. I have made several purchases from E Trailer, things have always worked out great.
Works as advertised.
Not much anyone can say about these. They work fine.
Brake assy. easy install.. Great ! I did not use the cut washers. Used thread lock instead. With cut washer & nut combined not enough thread bite on brake stud. Loom clamps & clips worked great. Used 10 gauge wire for brakes as your suggestion. Trailer had small gauge wire. Looked like #14 or #16 gauge. It was fried ! Had to order type 11 circuit breakers one 30amp. & one 40amp. Bad breakaway switch also replaced. Some one missed wired wiring. Had axels flipped. Thanks for wiring diagrams on your sight.. Travel trailer had a major melt down. Did not catch fire but some wood under side was burnt. Had to trace all wiring to see any further damage. Just only on brake side was the problem. Now my brake system is back to working. Brake control working now ! .That's what led me to know something was wrong. Thank you for your web sight. And thank your staff for their professional work. Their experience shows it. Your friend John R.
Great for wire safety, won't cut wires
I received my wiring harness and other components on the day in which they were promised for delivery. I had already viewed one of your posted videos on how to re-wire a utility trailer so I promptly installed the wiring harness and connected it to the lights which I had already mounted. Everything worked great! This was the first time I had re-wired a trailer and was initially apprehensive about doing the job myself. Your video made the difference! I have marked your website URL for future reference. You will be my "go to" site for trailer accessories and information.
I am glad I came upon this site. The staff is friendly courteous and helpful.
Since I live in Canada it is a big problem if I had to send items back across the border to etrailer if the items were not what I thought they were. The short videos that etrailer provides with each product is extremely helpful in determining to purchase or not. Thank you for that feature. Knowing a little about video production and the costs associated with that, it must cost etrailer a pile to give us (the consumers) what appears to be a simple addition on their site
Thanks again guys/gals
Worked as advertised. Good fit for protective cable carrying trailer wiring which was a 3/8 diameter. I used 1/4" stainless steel bolts with locking nuts to secure the A0500 to trailer frame.
Perfect for installing Firestone Coil-Rite Air Helper Springs!
Good quality. Should be pre-bent into position because you'll be under the car/truck when you install it. These will hold your brake controller cable running forward securely. I used a combination of these clamps and zip ties.
Great product at a great price. I was securing battery cables on a race car when I ran out of clamps. I found e-trailer on line and ordered the parts on a Sunday night. Parts were delivered to my door on a Wed! I will order from e-trailer again, great timely delivery.
I used these clamps to replace the very rusted set on my trailer. I was able to fit a 14/6 cable with a 1/2" dia. protective plastic loom, and a brake wire pair into them. It was a tight fit, but they are holding securely. Great price and service from etrailer.
All items in the order for trailer wiring components were exactly what I ordered and all items were delivered promptly. Good communication from Etrailer with reasonable prices, and FREE SHIPPING!! Nice.
Ordered a pile of stuff to do a complete trailer rewire.... all was perfect!! I'll be back for my next project!
Used these clamps to secure the brake lines on a disc brake conversion. Worked great!
I bought these 1/2" to hold the corrugated plastic wire loom in place down the undersides of the trailer. They worked ok, but they did smash it down a bit. That's ok for this installation as there was plenty of room for wires, but be aware of the tight fit.
Product worked as advertised, however, the eye holes are a bit of a small diameter. I had to drill them out a bit to enlarge them for use on my trailer wiring. Otherwise, the came exactly as purchased. Thanks
MJV
Pennsylvania
installatiin was a snap with the video as a guide. The only problem I encountered was not fitting very well under the dash with my 6'4" frame.
Worked well to secure my 6 wire trailer harness to the tongue.
I purchased 3 of these based on the recommendation of the video I watched for installing my trailer plug. It was a wise choice as these ensure the wire stays far away from the hot exhaust. Thanks!
Bought in conjunction with other items to rewire trailer.
Works as advertised.
Speedy delivery.
Overall - works greatThis clamp is easy to install and prevents undue rubbing or wires. The clamp is a bit small for 1/2 wire loom so you may have to expand the clamp to use it for this purpose.
I've made 2 purchases from etrailer.com in the past 3 weeks. Shipping was fast, the price was competitive and all items purchased were as stated in the descriptions. This is my go to site for any of my future needs.
Good quality. I used self- tapping screws to secure wire to trailer frame.
Not sure yet. The clamp looks too small for 1/2" conduit sent. Should a larger one be used
Andrew N.
10/11/2022
This Redline 12 inch clamp is indeed the correct one to use for up to 12 diameter wiring loom or conduit.
Andrew N.
10/11/2022
Dont worry, this is indeed the correct clamp to use for up to 12 diameter conduit or wiring loom.
Andrew N.
10/11/2022
Dont worry, this is indeed the correct clamp for up to 12 diameter conduit or wiring loom.
Do you have a question about this Electrical Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Andrew N.
10/11/2022
This Redline 12 Inch Clamp is indeed the correct size to use for 12 inch diameter or smaller conduit.