Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Corrosion-resistant clips help you secure loose wires on your trailer. Use them to supplement the clips in a wiring kit or to replace old worn-out clips. Fits around edges up to 5/32" thick.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Reviewer: Today we're going to be taking a look at part number CE16867A. These are the CE Smith trailer wiring clips. They're designed to be a frame-mount installation. Zinc plated steel is what they're made from. With this part number you're going to get 10 clips. These are going to be corrosion resistant clips. They're going to help you secure any loose wiring on your trailer.
You can use them to supplement the clips in the wiring kit, or you can even use them to replace old and worn out clips that you may have on your trailer. It's designed to fit around edges up to 5/32 of an inch thick. The clips, again, are simply going to secure the wiring to your trailer's frame. It's going to help prevent unsafe conditions caused by loose, drooping or stray wiring. It creates an overall, just neater appearance. It really tidies up the installation of your wires.
Very fast and easy installation, all you have to do is pop the clips on to the edge of your trailer frame and then tuck the wiring in. Again, zinc plated steel, so they're going to be corrosion resistant. Ten clips, and they're going to give us a wide of 3/8 of an inch. I do want to go ahead and show you how these do work. I have a piece of angle iron here today. What I'm going to do, is I'm simply going to take the clip, and you're going to notice here on the clip that one side's going to have these little teeth that come out. That's going to be the side that pinches on to the frame of your trailer.
Just place that on there. Give it a good push. I'm trying to go ahead and install a couple of them. Sometimes they can be pretty tight, so what I like to do is just take a tool or get a mallet or a hammer or whatever, just kind of hit that on there. Go ahead and do one more. You can see if we have these all along our trailer frame, how they'll work.
I'm going to take some 16 gauge bonded wire. This is going to be the wiring that you'd find on a four-way flat connector. Instead of having it drooping along the trailer frame, you can place it inside the clips, and it's going to hold our wiring up and out of the way, keeping everything safe. That's going to do it for our review of part number CE16867A. This is the CE Smith Trailer Wiring Clips. .
Average Customer Rating: 4.7 out of 5 stars (215 Customer Reviews)
Corrosion-resistant clips help you secure loose wires on your trailer. Use them to supplement the clips in a wiring kit or to replace old worn-out clips. Fits around edges up to 5/32" thick.
Worked great running wires for a Macerator on my Travel Trailer.
Restoring a 1991 2 horse trailer. etrailer had all the exact lights made by Peterson, 35 years later.
Great coupler. I swapped out the welded 1-7/8" (ball) coupler on the boat trailer my dad gave me as it was rusted and the latch needed to be replaced, and I already had a 2" ball mount. I considered buying a new ball mount with 1-7/8" ball for $30, but this just made more sense considering the poor condition of the original coupler and the simplification of only needing a 2" ball mount (standard size when renting U-Haul trailers for hauling landscaping dirt and rocks. Removing the welded coupler wasn't too difficult with a cutoff blade and grinding blade. Drilling the 1/2" holes took as long as cutting off the welded coupler. A definite upgrade for a better looking trailer and simplification of only needing one 2" ball mount.
The "CE Smith Trailer Wiring Clips - Frame Mount - Zinc Plated Steel - 10 pack" are truly a well made, heavy gauge wire clip with good spring tension to hold wiring to the frame. They arrived before the expected delivery date which was a great surprise and allowing me to get to my project quicker. They came well packaged/protected and I was amazed at how heavy duty they are. I would definitely recommend this company and their products.
Material got to me very quickly
Clips worked as described but should have been at least another inch longer.
I wanted additional clips to secure all wires on my etrailer. These did the trick. However, they were not the same type clip that came with my etrailer so I had to bend the open the wire-side. This modification worked so am satisfied. It’s possible I ordered the wrong clips but the wires are now secure. No regrets.
Works great
These clips worked great for keeping my brand new wire in its righful place.
These clip allowed me to install my wiring harness without needing to use staples or other device's
I needed trailer clips for my boat trailer for the new wiring harness I installed. I called Bass Pro Shops, Cabelas, and very marine dealer along the front range of Colorado and one had them. So, I went online and found them at etrailer.com. I highly recommend etariler.com. They had the trailer clips I requested on their website. After I ordered them I received 2 emails from their staff. The first verified my order and the second verified the shipping date. Great folks to work with and the pricing is the best I found on the internet. If you want quality parts, great service, an outstanding price, and fast delivery give etrailer.com a look. I'm back to fishing again thanks to them.
John N.
8/13/2015
everything is working exactly as planned. Thank you for your follow-up.
These trailer frame wiring mount clips work great on my kayak trailer build just tap them on with a small hammer and clip the wires in, keeps them from hanging down, my trailer frame is 3/16" thick X 4" wide steel channel, will not work on tube type frames.
I was extremely pleased with the order process from your company, the rapid shipment and follow-up.
Although there is not much you can write about regarding chassis wire clips other than they hold the wire to the chassis as advertised, my experience has been a blank stare at every "auto parts store" I visited. I guess current cars have no chassis (i.e. frame) to attach clips to. Most refer me to the plastic/nylon loop clips that need to be screwed to the attachment point, or the self-stick clamps that immediately fall off.
Thank You!!!
Bob G.
7/17/2017
For the most part, pretty well. I have had a couple fall off due to the thickness of the travel trailer frame. Any chance of having a slightly larger size for thicker frames?
Rachael H.
7/18/2017
Helpful Links
These clips are not easy to find. Thanks etrailer.com. These are the easy, neat way to clean up your light's wiring. Shipping was quick and packaging was excellent. I am very satisfied with all aspects of this transaction.
Ken P.
5/14/2018
Light wiring on the trailer is still secure and tidy after a year. The clips are secure and work as well as day one
It is difficult to find different size or device to secure trailer wiring. These clips worked fine, but are a little small if clipping on Main frame channel - 14K Doolittle tilt bed.
Sierra K.
1/5/2022
These clips fit around edges up to 5 thirty two inches thick with their width of 3 eighths. Item # A0250 has a width of 1 quarter inch.
Helpful Links
The CE Smith wiring clips work great. These clips keep the wires on my trailer anchored securely. A fantastic product.
Vernon
1/28/2020
The wiring clips still function as required. No issues.
installed on trailer to hold all electrical wires. They have held up fantastic and I will order more when I use my present supply up.
David S.
3/26/2018
excellent , I have wired up four trailers used on highway and woods .They keep the wires up and will be ordering more shortley
Fast shipping. Item as described. Works perfect keeping wiring secured to frame of trailer.
Terry D.
10/20/2021
No problems.Wire is still secure to trailer frame.
I recently ordered several products from Etrailer. All of them worked great, the price was fair and service/shipping was excellent. After ordering from them several times, I don't even look anywhere else.
Bob G.
6/21/2016
Same as before!
big help in corralling the wiring. The original clips that came with the trailer were not well designed.
Phil
6/19/2019
Works as expected. Would buy again.
Item seemed smaller than the "older" ones that i had, but they worked in the application that i needed. Product came quickly.
Staff was friendly and helpful. Will come back to etrailer again.
Ernie
9/6/2016
The items seem to be working well.. thank you
Just what I needed to put the wiring up under my trailer and clip it to the frame.
Carroll C.
7/27/2020
Still working great
Didn’t fit my trailer frame and wire, but clips themselves were fine.
Sierra K.
10/4/2021
these fit around edges up to 5.32 inches thick
I purchased a 4 light trailer light kit locally and a 4 wire trailer harness for my 5 x 8 utility trailer. I needed these harness clips that keep the wiring up against the frame of the trailer. I searched around my city with no one carrying them. I got onto this companies website and found them. I ordered and they arrived just a few days later.
Found exactly what I was looking for. Shipped promptly and arrived quickly. Thanks.
Do you have a question about this Electrical Tool?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dustin
6/4/2021
This product has held up very well, and I will definitely use them again.