Erickson Deluxe Axle Strap with D-Rings - 2" Wide x 24" Long - 3,300 lbs
(107 reviews)
Price: $16.94
In Stock
Erickson Deluxe Axle Strap with D-Rings - 2" Wide x 24" Long - 3,300 lbs
Item # 88509
Retail:$18.39
Our Price: $16.94
You Save: 8%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (107)
- Q & A (0)
- Videos (2)
- Photos
Erickson Car Tie Down Straps - 88509
- Axle Strap
- 2001 - 3500 lbs
- 0 - 5 Feet Long
- Erickson
- 1 Strap
- 1-1/8 - 2 Inch Wide
Use this axle strap to tie down a vehicle to the bed of a trailer. The strap loops around the axle and then attaches to a ratchet. Extra protective wear material offers additional protection to prolong the life of the strap. 10,000 lbs max load.
Features:
- Strap dimensions: 2" wide x 24" long
- Safe working load limit (WLL): 3,300 lbs
- Maximum load (break strength): 10,000 lbs
- Extra protective wear material prolongs the life of the strap
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
58409 Deluxe Trailer Axle Strap with D-Rings, 10K
Video of Erickson Deluxe Axle Strap with D-Rings - 2" Wide x 24" Long - 3,300 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Erickson Trailer Axle Strap with D-Rings Review
Today we'll be taking a look at the Erickson Axle Strap with D-Rings. This is rated at 10,000 pounds. Part number is 88509. This strap is 2 inches wide, 24 inches long. It has a safe working limit of 3300 pounds. The heavy duty stitching is going to help ensure your vehicle stays in place.
As you can see here, we've got our UTV all loaded up, just need to get it secured to the trailer. Now we're just going to bring this around, in our case, the control arm on our UTV. That could just as easily be the axle on a vehicle or truck. We're going to take our hook right onto the D-ring there, and then we'll just cinch it down. As you can see we've got a nice secure hold on our UTV here.
We're going to be able to go down the road with confidence knowing that we've got it secured properly. Now we'll head over to the other side, get it secured just the same as we did here. That will complete today's look at the Erickson Axle Strap, part number 88509. .
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
Customer Reviews
Erickson Deluxe Axle Strap with D-Rings - 2" Wide x 24" Long - 3,300 lbs - 88509
Average Customer Rating: 4.8 out of 5 stars (107 Customer Reviews)
Use this axle strap to tie down a vehicle to the bed of a trailer. The strap loops around the axle and then attaches to a ratchet. Extra protective wear material offers additional protection to prolong the life of the strap. 10,000 lbs max load.by: Erik09/22/2022
Those Erickson axle straps are pretty good, as I use 1 set of 4 per year.
I am a hobbyist, hauling light European sports cars around to/from : upholsterers, paint & body shops, delivering from what has been sold or I pick up a new acquisition and distribute them over the 4 storing facilities.
My next purchase of straps and tie-downs will again be from Erickson.
by: Garris03/07/2024
Have ordered other items as well and have never been disappointed.Staff very helpful and knowledgeable. Highly recommend doing business with etrailer.
by: Rev. E. Thomas Williams09/23/2023
The strap stretches after securing your load. It became frustrating when you are hauling a very expensive tractor.
by: John S.07/23/2017
These straps always make it easy to tie down just about any vehicle I haul. I ordered 2 more because I used 2 to hang a swing on a tree limb for my grandkids. Strong and will not damage tree limb. Multi purpose straps!!!
by: Brian G03/28/2018
Love these for going around axles on hauled cars. easier to get on and keeps straps out of harms way on the undercarriage. also use it with the winch to pull vehicles up on trailer. works great and keeps the winch cable from wrapping around stuff.
by: John I V08/03/2016
I choose this product to tie-down a car on a trailer. The wheels had opens which the straps could pass through then oval shaped threaded connecting links were used to connect the rings on the strap and a tie-down strap passed through the links on the two front wheels and a strap passed through the links on the two back wheels. The tie-down straps were connected to the trailer ahead and behind the car, tighten with ratchet, held the car in position.
by: John05/30/2020
I didn't use my strap as would normally be the case. I used mine to help support a Bismarck Pine that was having a problem with wind. The Erickson strap has been out in the weather for a year now, and looks as good as new. The Bismarck Palm is doing great as well. For the record, I also have several of these straps to tie my Ford Model T down to the trailer floor; they work well too.
by: Brad B.09/21/2016
I've used this a few times to tie-down my car to the trailer. Nice axle strap for the price. I only wish they made it in a 36" length so I could loop it through my wheels and tie it down there.
by: Lance01/16/2019
The straps seem to be of good quality. I haven’t used them yet, but I plan on using them for when I’m hauling vehicles on my gooseneck trailer. I only gave the straps a 4 star rating b/c I haven’t used them yet.
I received my package in a timely manner and everything was packaged nicely. I have had good luck so far with using Etrailer.com and would recommend them to anyone.
by: Geoffrey04/29/2019
I have owned this strap for about a year. I use it to tie down a race car in an enclosed trailer. The strap works great, has not frayed, and the buckles are still tight. This is a well made product that I expect will I will be using many years from now!
by: Tim 06/19/2023
Exactly what I needed!
by: Chris L04/26/2017
Whenever I need tie down rings, straps or trailer cargo items, I go to etrailer!
by: Gary07/27/2018
Great service, just received the straps and Axle Ratchets, yesterday after ordering them on Tuesday and delivering them on Thursday super fact service.. Going to haul our 67 Nov to Hot August Nights next week and will be using the straps to secure our car to the D Rings in the Trailer.
by: VTWIN04/13/2017
Haven't had a chance to use the product yet for the fact I just received it yesterday...looking at the unit it is as advertised and the quality seems to be good. The strap is of good quality, will see how it performs hauling a 1939 business coup from Maine to York PA.
etrailer has been a great place to get my truck and trailer accessories…great products and delivery times, at this time I highly recommend etrailer for all your vehicle and trailer needs.
by: Michael11/17/2020
The product works well and as described. We use them to tie down restored tractors for tractor shows so this worked nicely and the tractors don't get scratched up. We would recommend this product.
by: Dean02/13/2019
I used these to tie my truck down on car hauler trailer. There well made.
by: Doug 07/12/2020
Great strap, use to hold down the Jeep on my aluminum trailer. Easy to use and they keep from marring up the axle with a chain.
by: Jim F11/05/2016
I have another strap like tis that I've used for several years now. I'm switching trailers and needed another strap so I didn't hesitate to order another one. They are well made straps and the cover is very tough and durable. If you need an axle strap this is an excellent product and it's offered in various lengths. The cover is worth a little extra. Etrailer's service and shipping was excellent as usual.
by: Keith06/06/2019
These straps are good quality and rightly priced. They work well as axle straps. Be aware, at 24" long, they are not long enough to use as through-the-wheel straps for any normal modern car.
by: Andy09/03/2017
Easy to use with the ratchet tie down straps with the metal hooks.
by: Steve05/14/2014
These were just what I needed to tie down my jeep on the trailer.
they are rated at 10K lbs and more than enough to handle the job.
by: Joel 06/21/2020
These straps are exactly as advertised. They do an excellent job of making the tie-down process for my Side by Side so much easier and more secure. Highly recommend them and etrailer for their prompt service.
by: James04/07/2018
Never been disappointed with etrailer quality or service. This order was no exception. Package tracking system is the best. Highly recommend etrailer.
by: Jeffrey 03/02/2023
Works great!!!
25
107
Show More Reviews
See what our Experts say about this Erickson Car Tie Down Straps
- Width and Length of the Metal Ends of the Trailer Axle Strap with D-Rings # 88509 The metal ends of the Trailer Axle Strap with D-Rings # 88509 that you referenced are 3-1/8 inches wide by 3-1/8 inches long.
view full answer... - Winch Plate For 2019 Jeep Wrangler With BaseplateWe carry a winch plate for your vehicle as part of the Rampage Mass Articulation Front Recovery Bumper # RA88509. I was not able to confirm a 100% fit with your current baseplate, but their manufacturer says that they believe there's a good chance it might work because the Rampage product uses the factory holes with no drilling, and your current baseplate fits with a factory bumper. The Warn Zeon 10S winch is reported by Roadmaster to use the same mounting point as your current baseplate,...
view full answer... - Is The Rampage Mass Articulation Front Recovery Bumper A Compatible Fit For A 2023 Jeep Gladiator The Rampage Mass Articulation Front Recovery Bumper for Jeep # RA88509 would be a compatible fit for your 2023 Jeep Gladiator, but it is not rated for flat-towing so you would need to use a different bumper. Smittybilt offers some models that are rated for flat towing so I recommend checking out their selection.
view full answer... - Will the Factory Fog Lights Fit w/ the Rampage Mass Articulation Front Recovery Bumper for Jeep?Yes, they will! The very first step in the installation instructions, for the Rampage Mass Articulation Front Recovery Bumper for Jeep item # RA88509, goes over how to install your Gladiator's OEM fog lights. I have screenshotted an image from the instructions and attached them below so you can see the process.
view full answer...
- Recommended Erickson Car Tie Down Items for Wheels of 1934 ChevroletYou should be fine securing your '34 Chevy by its Torq Thrust wheels but you'll want to wrap the strap around the wheel and tire and not just one of the spokes. The Erickson Axle Strap with D-Rings # 88509 is 24-inches long and so should give you plenty of room. For a ratchet with more length than the 7-foot Erickson you might consider the Bulldog Combo Axle/Ratcheting Tie-Down Strap # BDW20229. This serves as both an axle strap (for your wheel) and a 10-foot ratcheting tie down rated...
view full answer... - Protective Sleeve Recommendation for a Erickson Tie DownThe only way to get the sleeves of the part # 88509 is to order them. They aren't available as a separate part. We do have a similar sleeve though, part # EM06305. This is used to protect painted surfaces, but it also protects the strap.
view full answer... - Off-Road Bumper Recommendation for 2017 Jeep Wrangler for Use with Base Plate KitI have a similar solution that might work well for you, but our off-road bumpers for your 2017 Jeep Wrangler like the Rampage part # RA88509 are not rated for flat towing even though they have D-rings on them. I was able to confirm with my contact at Blue-Ox that the above bumper will work with the Blue Ox Base Plate Kit part # BX1134. So what that means is that you can install this bumper if you like and still be able to install a base plate kit to allow the vehicle to be flat towed.
view full answer... - Is Rampage Bumper for 2018 Jeep JK Wrangler Compatible with Blue Ox Base Plate KitWe've checked in the past and the Rampage bumper part # RA88509 can fit your 2018 Jeep JK Wrangler with the Blue Ox base plate kit part # BX1126 that you have installed already.
view full answer... - Front Bumper with D-Rings for 2015 Jeep Wrangler Unlimited that Can be Flat TowedFor your 2015 Jeep Wrangler Unlimited Sahara we have the Rampage Mass Articulation Front Recovery Bumper # RA88509 that fits which has 1-inch D-rings so you could use the D-Ring adapter part # BX88358 with your Blue Ox tow bar.
view full answer... - Flat Towing A 2022 Jeep Wrangler Rubicon With The Rampage Front Recovery BumperI do have an option that will allow you to flat tow your 2022 Jeep Wrangler Rubicon. Unfortunately, you will not be able to directly attach a tow bar to the d-rings of the Rampage Mass Articulation Front Recovery Bumper for Jeep - Grille Guard, Light Mounts, Winch Plate, part # RA88509. However, you can attach the Blue Ox Base Plate Kit - Removable Arms, part # BX1134, to your frame/chassis. Then you can attach to tow bar to this baseplate. I have included a product description link...
view full answer... - Recommended Straps to Transport 3,000 lbs Roller on a TrailerFor your 3,000 lbs roller, I recommend using the Erickson Car Tie-Down Kit - Twisted Flat Hooks and Axle Strap w/ Ratchet # 08504-05, provided you have the necessary attachment points. This kit has a working load limit (WLL) of 3,300 lbs so it would be enough for your roller. This kit comes with an axle strap, but if you needed additional axle straps for tie-downs, you could use the Erickson Axle Strap with D-Rings # 88509. If you do not have good tie-down points, another option would...
view full answer...
- Do Tie-Down Points/E-Track Need to Be Installed to Secure Arctic Cat to 4 x 8 Foot Utility TrailerYou wouldn't need to install dedicated tie down points into the trailer floor, your Arctic Cat can be secured to the trailer, but I'd rather see you use a combination of the # EM58522 wheel nets and for the front wheels and axle straps like # 88509 and ratchet straps such as part # EM51330 for the rear axle. The J-Hooks from the wheel nets could attach to the front underside of the trailer, and the axles straps and ratchet straps could secure the rear.
view full answer...
- Recommended Winch to Mount on Rampage Mass Articulation Front Recovery Bumper # RA88509Since you're wanting to mount the winch on the front of a Jeep, I'm guessing you're looking for an inexpensive vehicle recovery winch. The Superwinch TigerShark, part # SW1595200 would be an excellent choice for you. The winch has plenty of capacity for recovery use. I also recommend the accessory kit, part # SW2224 which includes a pulley block that can essentially double the capacity of the winch. I've linked you to a help article about winches, as well as to a product demonstration...
view full answer... - Recommendation for Good Looking Aftermarket Bumper for 2016 Jeep Wrangler to be Used with Tow BarFor your 2016 Jeep Wrangler I really like the rugged and durable look of the Rampage Mass Articulation Front Recovery Bumper # RA88509. The bumper features D-rings to let you perform recovery operations, a winch plate for simple winch mounting, and integrated receptacles to let you relocate your factory fog lights if you want to. None of our aftermarket bumpers including the Rampage Mass Articulation Bumper are designed to be attached directly to a tow bar for flat towing applications,...
view full answer...
- Can the Rampage Mass Articulation Bumper Part # RA88605 Be Used to Flat-Tow a 2017 Jeep WranglerI do have an option for you but a tow bar cannot be attached directly to the Rampage Mass Articulation Front Recovery Bumper part # RA88509 as the manufacturer stated it is not rated for this application. However, I was able to confirm with my contact at Blue-Ox that the above bumper will work with the Blue Ox Base Plate Kit part # BX1134. The Rampage bumper will not require you to alter any factory components for installation. There are four bolts holding on each side of the bumper that...
view full answer... - Will Bulldog Winch Universal Winch Mount BDW20008 Fit OEM Bumper on 2014 Jeep Wrangler UnlimitedThe Bulldog Universal Winch Mounting Plate for Trucks # BDW20008 is a general-application item designed to be a good general fit on many vehicles. The nature of this item's universal design means that each vehicle installation may differ slightly but the winch mounting holes have the common 10 x 4-1/2-inch center-to-center hole spacing. You can compare that hole spacing to what is on your winch. If the mounting hole pattern differs you'll need to drill the plate; be sure that the complete...
view full answer... - Flat Tow 2020 Jeep Gladiator Sport w/ Rampage Mass Articulation Front Recovery BumperI think the best option for your 2020 Jeep Gladiator Sport w/ Rampage Mass Articulation Front Recovery Bumper is going to be the Blue Ox Bolt-On Base Plate Bracket Kit - 5,000 lbs, # BX88230. This is designed to let you create your own base plates by mounting to a flat section of a metal bumper. This will of course require a certain level of fabrication to your aftermarket bumper when using these brackets, please note the link to product review video. A second option is the Blue Ox Aftermarket...
view full answer... - Are Brophy Trailer D-Ring Tie Downs # RR05 Suitable for Use on a Car TrailerAccording to my contact at Brophy, their # RR05 Trailer D-Ring Tie Down has a working load limit of 1600-lbs and a break strength of 5,000-lbs. (Working Load Limit or WLL is the maximum burden that should be put on the device in daily use.) This makes this sturdy 2-1/2-lb tie down perfect for use on a car hauler trailer. In a typical trailer configuration with four or more of these tie downs being used at the same time you will have at least 20,000-lbs of capacity for securing the loaded...
view full answer... - Which Aftermarket Front Bumper For 2010 Jeep Wrangler Is Compatible With Flat Towing?While there is not a way to attach a tow bar to any of the front bumpers for the 2010 Jeep Wrangler Unlimited, you can add a baseplate kit that would allow a tow bar to hook up while still being compatible with your Rampage Mass Articulation Front Recovery Bumper # RA88509 (winch plate included). You will want to go with Blue Ox Base Plate Kit - Removable Arms # BX1134 as this is confirmed to fit with the Rampage bumper. Then you can add a tow bar such as Blue Ox Alpha 2 Non-Binding Tow...
view full answer... - Can A Front Mount Hitch Be Installed On A 2021 Jeep Wrangler Unlimited With A Blue Ox Base Plate?Depending on what you were planning on using the front hitch for, I may have an alternate solution available, but as the Curt Front Mount Hitch # C31086 will install in the same place and sit in the same place as the Blue Ox Base Plate # BX1139 on your 2021 Jeep Wrangler Unlimited, you will not be able to have both attached at the same time, unfortunately. I was hoping I could find a work around for you, but both options will be competing for the exact same space. I checked with the Draw-Tite...
view full answer... - Parts Needed to Flat Tow a 2017 Jeep WranglerIn order to flat tow your 2017 Jeep Wrangler Sport you may be able to just attach a tow bar if you have the Off-Road bumper with 1 inch D-Ring bumper mounts you would use # RM-035-1 or for 3/4 inch D-ring bumper mounts you will need # RM-035. If you do not have those D-ring bumper mounts I recommend the Roadmaster EZ5 Base Plate Kit # RM-521448-5. For a tow bar with any of the aforementioned base plate kits I recommend going with the Roadmaster Falcon 2 Tow Bar # RM-520 because of how...
view full answer... - Recommended Flat Towing System For 2016 Jeep Wrangler Unlimited with Front Mounted HitchFor your 2016 Jeep Wrangler Unlimited with front mounted hitch like # 31432, you will either need to remove the front mounted hitch to install a base plate system or replace your factory bumper. I recommend going with an aftermarket bumper option like # AA2156000 or # RA88509 for your bumper and then using the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick # RM-035-1 for your tow bar. Then for the rest of your system, I recommend the following: Roadmaster...
view full answer...
Do you have a question about this Car Tie Down Strap?
Info for this part was:
Updated by:
Leah B
Updated by:
Rachael H
Updated by:
Jacob W
Updated by:
Hannah L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Kathleen M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John S.
7/26/2018
All products are still performing well.