Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Heavy-duty ratchet strap pairs with an axle strap (sold separately) so you can tie down a car or equipment in your truck bed or trailer. Twisted snap hooks with safety latches provide quick, secure connection and keep strap flat. 10,000 lbs Max load.
Features:
Specs:
Note: Tie-down straps must be chosen according to their safe working load limit (WLL). The weight of the secured cargo must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 500 lbs each to tie down a load weighing 1,000 lbs, then you need at least 2 straps to safely secure that load. It is recommended that you always use straps in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're taking a look at the Erickson Car Tie-down with Ratchet and Twisted Snap Hooks. This heavy-duty tie-down strap lets you secure a vehicle or equipment on your truck bed or trailer. You can use this with an axle strap to secure the tie-down to your vehicle's axle. Axle straps are sold separately and available at etrailer.com. This unit features the sturdy ratchet mechanism that helps you achieve and maintain maximum tension on your strap. It has a nice large release lever right here which disengages the ratchet when you're ready to unload, so that allows you to release the tension of the strap.The ratcheting mechanism is very easy to use.
Right now it's in the stowed or travel position, so to move it to the ratcheting position, you lift up on the release lever, put it in this middle position. That's going to allow you to ratchet which is going to allow you to take out any slack in the strap and get it tight over or around your gear, whatever it is that you're using it for. And then when you're ready to unload your gear, you take the release lever, open the ratchet all the way up, and then pull right here on the hook end, and that's going to allow the strap to feed through. That way you can loosen the tension, and you can unload your gear.Overall, it's a really nice design. It's easy to use.
Nice large ratchet mechanism gives you plenty of room right there to get your hand in there even if you have gloves on, and on the ends we have the twisted snap hooks. This is the twist design. This provides quick, secure connection to your axle strap or other anchor point. We have the built-in safety latches, spring-loaded, to help prevent accidental disconnecting, and the twisted design helps keep the strap laying flat. The strap is blue in color.
It's made from a durable polyester webbing, and then on the steel components we have that yellow decrement-plated steel design to help resist rust and corrosion. This does meet Department of Transportation standards.When it comes to dimensions, our strap measures two inches wide by seven feet long. Has a safe working load limit of 3,300 pounds, a maximum load or break strength rating of 10,000 pounds. Just keep in mind that tie-down straps must be chosen according to their safe working load limit, so the weight of your secured cargo must not exceed the combined working load limit of the straps being used.That's going to do it for today's look at the Erickson Car Tie-Down with Ratchet and Twisted Snap Hooks.
Average Customer Rating: 4.8 out of 5 stars (12 Customer Reviews)
Heavy-duty ratchet strap pairs with an axle strap (sold separately) so you can tie down a car or equipment in your truck bed or trailer. Twisted snap hooks with safety latches provide quick, secure connection and keep strap flat. 10,000 lbs Max load.I’ve only given 4 stars on the ratchet straps so far since I had just received these today. I had purchased these due to its extra strength and latching hooks. These are definitely an upgrade over any I can buy locally. I use these to strap over each tire on our utv to the d-rings mounted to the floor of the trailer. These are 7’ long which is more than sufficient to reach over the tires and not having to tie and untie 10’-12’ extra tail strap. The construction is what sold me to purchase these straps for 2k round trip travels to Colorado.
I love these tie-downs
My 3rd set of these Erickson tie-downs. Great product.
They work really well, just wish they were a 1-2 foot longer, as the ones i had before were longer and worked better for my tractor reaching my rear D hooks on my trailer.
Strong, convenient straps . Hooks stay in place in D rings, use for securing loader to trailer. Works great.
Good price, fast shipping
Will order again
Great products and excellent service
I have not had a chance to hook them up and use them, however they seem to be high quality and I look forward to using them.
Great stuff good prices!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
12/3/2021
I think this product will be really great for you, item # SS35MV. It has the same Working Load Limit but is a bit longer for your project.
Helpful Links
Car-Tie-Down-StrapsShockStrapSS35MV.html