Difference Between Landing Gear Sets

Question:

I have a 2001 Sunnybrock 5th wheel camper and need to replace the landing gears but the measurements for what you have doesnt really match. OuterTube is 30.75 long, 8 inches from top of the tube to bottom of 1st stop and the distance between the two stops inside to inside is 15.75. Any suggestions other than modifying one of your normal sets? I am looking at RVLG-8000 or RVLG-8HDL . What is the difference of these two sets?

asked by: Ron L

Expert Reply:

The only difference between the two landing gear sets you referenced is that Landing Gear # RVLG-8HDL comes with a handle and # RVLG-8000 does not.

Apart from that they are the exact same landing gear sets, with 20-1/2" of travel, an 8,000 lb weight capacity, 44-1/2" between the legs when they are as close as possible and 72" when as far apart as possible.

This landing gear is designed to fit the standard weld stop measurements of 15-1/2" inside to inside of weld stops and 17-1/2" outside to outside. Instead of modifying the landing gear you can have the brackets on the trailer moved to match the landing gear.

expert reply by: Kyle S