Replacement Weld-On 5th Wheel Landing Gear Leg Bracket for Lippert RVs
(11 reviews)
Price: $14.45
In Stock
Replacement Weld-On 5th Wheel Landing Gear Leg Bracket for Lippert RVs
Item # LC113511
Retail:$30.92
Our Price: $14.45
You Save: 53%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (11)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC113511
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Lippert
Replaces the weld-on bracket for your Lippert 5th wheel landing gear. Bracket measures 2" long x 3-1/8" wide x 3-7/8" tall.
Features:
- Replaces the weld-on bracket for your Lippert 5th wheel landing gear
- Bracket measures 2" long x 3-1/8" wide x 3-7/8" tall
113511 Replacement Lippert Components Weld On 5th Wheel Landing Gear Leg Bracket
Video of Replacement Weld-On 5th Wheel Landing Gear Leg Bracket for Lippert RVs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Replacement Weld On 5th Wheel Landing Gear Leg Bracket - LC113511
Hi, everybody. Andy here with etrailer.com. Let's take a brief look together at this replacement Weld-On Fifth Wheel Landing Gear Leg Bracket for Lippert RVs. Now this is for use on your LCI Power Landing Gear assemblies, and this replacement standard weld-on landing gear leg bracket for fifth wheel RVs is going to get you back to camping, and enjoying the great features of your power landing gear. Now this does include exactly what you see here on my table before me, this leg bracket only. There's no other parts included.
This is a weld-on application, so this is going to be ready for you to weld into place when you receive it. And just to give you the further confidence that this is going to work for you, let me give you some overall measurements. So I wanna look at the width first. So measuring end-to-end, as you can see, we are just a little over three inches. Let's call it 3 1/8 inches wide.
Looking at what I'm gonna call the length here, we're sitting right at two inches long. And then the height, we are sitting almost four inches. It's a little bit under, let's call it a 3 7/8 inches tall. So if you are looking for a replacement leg bracket for your LCI Power Landing Gear assembly, this is gonna be exactly what you need. Well, that's gonna wrap up our real quick look today.
I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Weld-On 5th Wheel Landing Gear Leg Bracket for Lippert RVs - LC113511
Average Customer Rating: 4.4 out of 5 stars (11 Customer Reviews)
Replaces the weld-on bracket for your Lippert 5th wheel landing gear. Bracket measures 2" long x 3-1/8" wide x 3-7/8" tall.by: KR07/03/2023
Strong and worked great. Ended up using for another project since we didn’t have to replace them in our camper.
by: Dean11/04/2018
I dont know what this part is,not for mounting electric motor to landing legs on my fifth wheel and took for ever to get it
by: Dr H09/29/2016
If anybody need to know how to install a landing gear leg on a Grand Junction, feel free to contact me.
The parts came in good, the customer service was good. I wish they would have let me know that they were waiting on the small bracket but when I asked about it they were very up front about it. SO I am very pleased with everything.
This is a very good internet company to deal with.
by: Rick S.07/07/2016
I purchased 2 of these previously from another place and upon returning to buy 2 more, their price was more than twice previous order 9 months earlier. I searched and found them here at better price than I had paid 9 months earlier. This is not the first time I purchased from www.etrailer.com and I will be back again as needed. THIS time here I was amazed that I got a personal email from an employee stating that my order had been upgraded for quicker delivery than what I had paid for and it arrived about a week sooner than expected. Thanks, George! I ordered 2 but needing only 1 so asking why? Planned ahead last time and the first one was not welded in place properly AND because I had a backup, the welder was able of complete the job shortly instead of hours or days later. I am in same situation this time with a possible need for a backup. BTW: previous orders here at etrailer have had same 5 star rating but this is the first time I did a review since I USUALLY do not do reviews. I hope this helps someone. Part number here is LC113511 which is a brackets used to hold landing gear on front of 5th wheel campers for me.
by: Sean 05/04/2020
Welded on and attached Jack's just fine. I used them on an old stripped camper frame that I made into a hauling trailer.
by: DJ08/05/2022
Part of order missing from shipping damage. I think the shipping box could be better but etrailer fixed it right away. Great customer service!
by: Bonnie07/22/2021
These brackets are very substantial and well made. I wasn't sure if I needed them, but I'll know more when my landing gear arrives. I know that if I end up not needing them, the great customer service at etrailer will make the return simple and efficient.
by: Clifford06/08/2018
Made installing the landing gear simple
by: Wes 10/07/2022
The people were great to deal with and followed. Very happy with my experience.
by: Clint 06/27/2020
Very good product would order again.
by: Edgar 09/18/2021
11
11
See what our Experts say about this Lippert Accessories and Parts
- Are the Dimensions of the Lippert Landing Gear Bracket # LC113511 and LG-Brackets the SameThe Lippert landing gear bracket # LC113511 is 2" long x 3-1/2" wide x 4-1/2" tall just like # LG-Brackets. The top portion of the bracket has a slightly different bend to it, but for all intents and purposes these are basically the same thing.
view full answer... - Replacement Weld-On Frame Clamp Leg Brackets to Install 5th Landing GearThe brackets needed to install the Landing Gear Set # RVLG-8000 is part # LC113511. These are sold individually.
view full answer... - Replacement Landing Gear Bracket for an LCI Landing Gear On An 2019 GD Reflection 5th WheelWe sure do! I believe you're looking for the Replacement Weld-On 5th Wheel Landing Gear Leg Bracket for Lippert RV's # LC113511. This is a standard weld-on frame bracket that is designed to work on LCI assemblies like your Lippert Components 32" Lead 5th Wheel RV Landing Gear Drop Leg w/Snap Pin # LC179013, and has measurements of 2" long x 3-1/2" wide x 4-1/2" tall.
view full answer... - Curved Portion of Lippert 5th Wheel Landing Gear DimensionHey Neil, so the dimension you are looking for is 3/4 inches. This is the distance from the top of the bracket down to the inside portion of the curved part of the bracket.
view full answer... - Does etrailer Landing Gear Set w/ Handle Come With Leg BracketsBrackets are not included with the Landing Gear Set w/ Handle # RVLG-8HDL. If you need them you can use the Replacement Weld-On 5th Wheel Landing Gear Leg Bracket for Lippert RVs # LC113511. You will need two for each leg so a total of four.
view full answer... - Replacement Landing Gear for 1995 Sierra by CobraFor replacement landing gear on your 1995 Sierra by Cobra you can use the Landing Gear Set # RVLG-8HDL. Since nothing matches your weld stop measurements you will also need to weld on new brackets # LC113511. This landing gear has a capacity of 8,000 lbs and uses the standard inside 15-1/2" and outside 17-1/2" measurements found on most modern landing gear. If you want to add a motor it is available separately # LC142178.
view full answer... - Does the Lippert LC333964 Land Leg Carriage Bolt Have Torque Specs?I checked with Lippert Components and the Lippert Electric Landing Gear Set # LC333964 and the bolt that comes with the bracket needs to be torqued to 10-18 ft-lbs. You do need to be careful not to get it too tight because you could actually bend the bracket if you aren't careful. The flanges on the bracket # LC113511 should not measure less than 2-3/8" between them (see attached photo).
view full answer...
- Replacement 5th Wheel Trailer Landing Gear BracketsThe Lippert landing gear bracket # LC113511 is 2" long x 3-1/2" wide x 4-1/2" tall just like # LG-Brackets. They are roughly 3/16 inches thick but that can vary some so a range of 1/8 to 3/16 inches would cover it. For the most part landing gear is all dimensionally the same which is why many of the parts are interchangeable amongst the different brands. You could go with either of the above part numbers and they would work. Both are also raw steel, not galvanized, and are meant to be...
view full answer... - Looking For Replacement Atwood Follow Leg For A 1991 Terry Resort 5th WheelHello Mitchell. We do have a potential option for you, but Atwood is no longer in business, so I am afraid we do not offer a follow leg that will be a suitable replacement for you. The landing gear that Atwood made when they were in business did not always follow the industry standard, making many parts made today incompatible. I hate to say it but the solution for you and many other customers who find themselves in this same situation is to replace the entire set which may sound like a...
view full answer... - Can the Follow-Leg Be Replaced On an Atwood Landing Gear SetI would love to be able to give you a replacement follow leg for your landing gear set but sadly it's not going to be that simple. The issue is that Atwood has gone out of business and the products they offered while in business did not always follow the industry standard so I would really have no way of making sure you get a compatible follow-leg that's to say there is even one available which is really anyone's guess. I hate to say it but the solution for you and all of our many other...
view full answer... - Installation of etrailer Landing GearThe Landing Gear Set w/ Handle - 36-1/2" Lift - 8,000 lbs # RVLG-8HDL will simply mount to the weld-on brackets by being bolted on. While an online copy of the manual is not available for this specific landing gear, I did cut out a portion of the Stromberg Carlson Manual Landing Gear Set - Weld On - 34-7/8" Lift - 8,000 lbs # LG-183708 so you can take a look. In regards to the brackets you asked about, the Replacement Weld-On 5th Wheel Landing Gear Leg Bracket # LC113511 will work with...
view full answer...
- How To Install the Landing Gear Set Part # RVLG-8000The installation of the Landing Gear Set part # RVLG-8000 will be fairly straight forward. Basically, you will need to have a metal support structure so you can attach welded tabs part # LC113511 to it, 15-1/2" apart. Once these are installed you can then mount the jack tube and modify a cross-shaft that connects the two together which is included. Then, you will need to obtain a handle, the Crank Handle part # RVLG-HDL to raise and lower the legs. Unfortunately, we do not have a video...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Installed by:
Andy C
Written by:
Chelsea B
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Mike L.
11/5/2018
This bracket is intended for mounting landing gear legs to the frame of a fifth wheel, not for mounting a motor.