Stabilizer Jacks Needed for a Military M101 A2 3/4 Ton Cargo Trailer
Question:
I have a former military M101 A2 trailer and the frame height is approx 25. I want to get a stabilizer jack or 2 for the back of the trailer. Will the TJ01RT extend long enough to work.? What is the max extended length of the TJ01RT? If it is not at least 25inch do you have another item similar that is longer?
asked by: Michael S
Expert Reply:
When fully extended the Domar Trailer Jack, # TJ01RT, measures 18 inches from top of bracket to bottom of foot. We do not have a jack of similar construction that is longer but there are options.
We carry 30 inch tall scissor style stabilizer jacks, # JSC-30 (single) and # JSC-30-IND (pair), that would most likely be a better fit with the 25 inch frame height on your Military M101 A2 trailer. This would most likely be the best option for you.
We also have the stabilizer leg, # FSJ20324, that can be used with a Square Mounting Channel, # FSJ10300, and a lynch pin, # F0938005-40, if welding the mounting channel onto the side of the frame is a possibility, and you have clearance above the frame to slide the leg up and secure it so that it is high enough.
I recommend carrying a couple of blocks to lie on the ground when lowering the jacks or drop leg stabilizers, to keep them from sinking into the ground.
![Bob G](https://images.etrailer.com/static/images/catg/people/287_tn.jpg)
Products Referenced in This Question
Fulton Square Mounting Channel for Drop-Leg Stabilizer Jacks - Weld-On - 13" Long
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Outer Tube
- Fulton
more information >
Fulton Square Drop Leg for Stabilizer Jack, 29" Long
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Legs
- Drop Leg
- Fulton
more information >
Leveling Scissor Jack Set - 30" Lift - 10,000 lbs - QTY 2
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 9001 - 10000 lbs
- Scissor Jack
- 30 Inch Lift
- Bolt-On
- Weld-On
- 2 Jacks
- Stromberg Carlson
more information >
Leveling Scissor Jack - 30" Lift - 5,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Pop Up Camper
- RV Motorhome
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 4001 - 5000 lbs
- Scissor Jack
- 30 Inch Lift
- Bolt-On
- Weld-On
- 1 Jack
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Stabilizer Jack - 6-1/4" Drop Leg Travel - 18" - 650 lbs - Qty 1
- Camper Jacks
- Pop Up Camper
- Teardrop Camper
- Travel Trailer
- Stabilizer Jacks
- Steel
- 0 - 1000 lbs
- Drop Down Jack
- Bolt-On
- Weld-On
- 1 Jack
- etrailer
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Correct Replacement Parts for a Ventline VD0434 Roof Vent
- Q&A: Overall Dimensions Of The Stabilizer Jacks # TJ01RT-HD In The Stowed Position
- Q&A: Replacement AC Unit For The Carrier 68RV15102A
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Comparing Kenda Karrier, Taskmaster and Provider Special Trailer Tires in Size ST21575R14
- Q&A: Comparing Kenda and Provider Trailer Tire in Size ST205/75R14
- Article: Most Popular Wheel Bearings
- Q&A: Load Capacity for Rackem Fitz-All Enclosed Trailer Ladder Rack
- Q&A: Can I Replace Leaf Springs With Lower Rating For Better Ride Quality