Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
(7 reviews)
Price: $548.16
Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
Item # T1607500
Retail:$769.74
Our Price: $548.16
You Save: $221.58
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (7)
- Q & A (0)
- Photos
Dexter Brake Actuator - T1607500
- Surge Brake Actuator
- Drum Brakes
- 2-5/16 Inch Ball Coupler
- 12500 lbs GTW
- Weld-On
- No Lockout
- Fabrication Coupler
- Dexter
Surge-type actuator welds onto 3" wide trailer tongue and includes a standard, heavy-duty coupler. Features a primed finish, durable construction and an efficient roller design to reduce resistance. For use with drum brakes.
Features:
- Hydraulic actuator synchronizes trailer brakes with tow-vehicle brakes
- Unique roller design reduces resistance during telescoping to create straight-line movement
- Sturdy, durable steel construction resists bending in jackknife situations
- Standard, heavy-duty coupler
- Breakaway kit included
- Primed finish
- Weld-on installation
Specs:
- Application: hydraulic drum brakes
- Ball size: 2-5/16"
- Mounting: 3" wide channel tongue
- Capacity: 12,500 lbs
- Maximum tongue weight: 1,250 lbs
- 1-Year warranty
When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle. With surge brake systems, the actuator is triggered as your trailer moves forward while the tow vehicle slows. The actuator telescopes, applying force to its master cylinder, which in turn supplies the necessary hydraulic pressure to engage the trailer's brakes.
Because this model does not include a reverse lockout, it is recommended that you equip your trailer with free-backing brakes so that you can drive in reverse without triggering your trailer's brakes.
068-044-00 Dexter Axle Model 10 Actuator with 2-5/16" Ball Coupler - Drum Brakes - Primed Finish
Replaces Titan 1607500
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs - T1607500
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
Surge-type actuator welds onto 3" wide trailer tongue and includes a standard, heavy-duty coupler. Features a primed finish, durable construction and an efficient roller design to reduce resistance. For use with drum brakes.by: Albert J.10/12/2011
Have the same unit on my boat trailer - reliable for the last 20 years. This unit will go into service on my car trailer and look forward to many years of service on it too.
by: David09/03/2017
Actuator came as described. No problems with shipping. Thank you
by: Clarence03/08/2019
great hitch.
by: Don B.04/08/2015
Great service, fast shipping. Will shop here again.
by: Sergio Rodriguez11/08/2018
Free from defects and easy to install
by: Colby 04/12/2023
by: Troy 11/02/2021
7
7
See what our Experts say about this Dexter Brake Actuator
- What Is Needed To Upgrade Brakes On Trailer With Tandem 7000 Lb Axles And Brakes On One AxleDisc brakes stop harder than drum brakes and require less maintenance. You will need to make sure the brakes all match if you are adding to the second axle. Also you will need to make sure you have the correct actuator. If you have drum brakes on your trailer, you will need to replace the brakes and actuator to those designed for disc brakes. I have attached a link to our product page for brakes that can be used for 7,000 lb axles. They are all 12 inch x 2 inch brakes. You can use the...
view full answer... - What Is Top Width Of The Titan Brake Actuator T4749600?The top width of the Titan Brake Actuator - Painted - Disc - 2-5/16" Ball - Weld On - 12,500 lbs # T4749600 you were looking at measures right at 4" as shown in the included diagram. This will be the exact same dimension as the # T1607500, but you will need the # T4749600 for disc brakes as it has higher pressure which is required for disc brakes. The # T4749600 will be an exact replacement for the # T1607500 if that is what you have on your trailer, and is designed to fit 3" wide tongues...
view full answer...
- Troubleshooting Trailer wish Surge Brakes that Slams When Stopping and StartingSounds like you have a bad shock in the surge actuator of your trailer based on what you described. The actuator part # T1607500 is a Model 10 and if this is what you have then the correct shock replacement is the # T1242600.
view full answer...
- Does Titan Model 10 Actuator Replace Dico Model 10The DICO Model 10 that you have is essentially the exact same thing as the Titan Brake Actuator # T1607500 that you referenced. This would be an exact replacement.
view full answer... - Surge Drum Brake Actuator Solution for Older Trailer that has 4 inch Wide FrameI googled the grease seal number you mentioned and I did find some options online but when I looked up the size it wasn't one that we carry a suitable replacement for. For a coupler solution though you could use the Dexter part # T1607500 which you'd want to weld to the top of your trailer frame. It was not designed to fit over a frame channel so your width being wider than usual wouldn't be a factor.
view full answer... - Replacement Parts For A Titan Model 10 Master Cylinder and DampersYes, you will be able to remove the master cylinder from the Titan Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs, part # T1607500. This is a direct replacement, so you will not need a reducer. The master cylinder you need is for a drum brake actuator. It is the Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators, part # DX66FR. This replaces the master cylinder and pushrod in the Titan Model 10 Actuator. You will also need...
view full answer... - Brake Solenoid for 85738 Atwood Surge Trailer Brake - Replace WithAtwood Mobile Products was sold several years ago and parts for their braking systems are no longer available, but I do have a solution for you. Your 2006 Dorsey Trailer (23' Chaparral Model) has a GVWR of 7100 pounds. You can replace the surge brakes with the Titan # T1607500 A-Frame Brake Actuator, rated for 7500 pounds. This unit will weld on and connect to 2-5/16” hitch balls. It is fully zinc coated and includes breakaway kit. Below I have attached a link to this product and a video...
view full answer... - Actuator Solution that Can Fit 4 inch Wide TongueYou could weld an actuator like the Dexter Drum Brake Actuator part # T1607500 to the top of your trailer tongue but there isn't one that fits around a 4 inch wide tongue. If your brakes are disc instead you'd want the part # T4749600.
view full answer... - Replacement Surge Coupler for my 7,500 lb. Boat TrailerWe have what you need. The Dico 17550 refers to a 2-5/16" ball replacement not the actual actuator. For the actuator and coupler use the Titan Brake Actuator part # T1607500 will get you back up and running. This is for drum brakes and offers a 12,500 lb. capacity. Check out the linked video to see it and a more detailed description.. The HydraStar Hydraulic Brake Line Kit part # HS496-252 is the longest tandem kit I have. It includes all the mounting hardware and tee connectors but you...
view full answer... - Replacement Coupler For Boat Trailer With Surge Brakes Weld On and Bolt On OptionFor a weld on option, Titan Weld on Brake Actuator part # T1607500 is a good option. The Titan Brake Actuator welds onto a 3" wide trailer tongue and takes a 2-5/16" ball. This actuator does not have a reverse lock out option. WIthout a reverse lockout you may not be able to backup the trailer without the brakes activating. If you have free backing brakes, you do not have to worry about that. We do not carry a standard ball coupler with electric lockout that is a weldon option. I recommend...
view full answer... - Installing Titan T1607500 Surge Brake Actuator As Replacement For Titan Model 10 ActuatorUnfortunately you will have to remove everything in order to properly complete the weld install of the Titan Brake Actuator, Item # T1607500. Please contact me if you have any other questions.
view full answer... - Replacement Master Cylinder for Titan Model 10 Actuator on 1999 Prestige TrailerThanks for the photos of your trailer's actuator! They were very helpful in answering your questions. Based on the photos, it appears that you have a Titan Model 10 Actuator # T1607500. For a Model 10 actuator, the # DX66FR that you referenced is the correct replacement master cylinder. If you'd also like to replace the master cylinder bracket assemblies, they are included with the master cylinder in part # T2374600. To install the master cylinder, the orifice connector you will need is...
view full answer...
- Trailer Surge Brake Actuator Option For 3-1/2 Inch Wide Trailer FrameAlmost all trailer brake actuators are designed for 3 inch wide trailer frames, the only option would be to weld a coupler on top of your 3-1/2 inch frame. The issue with this for you is that the options for those only accept a 2-5/16 inch hitch ball, so if it all possible you would need to switch to that, with either the 1 inch diameter shank 2-5/16" Hitch Ball # C40005 or 1-1/4 inch diameter shank 2-5/16" Hitch Ball # C40030. If you can go to the 2-5/16 inch hitch ball, then you can...
view full answer... - Inner Slide Assembly Recommendation for a Titan Model 10 ActuatorYes, for just the inner slide assembly of the Titan Model 10 actuator part # T1607500 you would want the part # T1608400317.
view full answer...
Do you have a question about this Brake Actuator?
Info for this part was:
Written by:
Lindsey S
Installed by:
Patrick B
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.