Replacement Parts For A Titan Model 10 Master Cylinder and Dampers
Question:
I would like to replace the master cylinder on my welded T1607500. Do you know if the master cylinder will come out the front of the outer case ? Also, will the existing orifice connector fit the new cylinder or do I need a reducer. Would you please give me replacement part numbers for the master cylinder, dampers, and reducer/enlarger if needed for the T1607500. Thanks for your help,
asked by: Hardy B
Helpful Expert Reply:
Yes, you will be able to remove the master cylinder from the Titan Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs, part # T1607500. This is a direct replacement, so you will not need a reducer. The master cylinder you need is for a drum brake actuator. It is the Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators, part # DX66FR. This replaces the master cylinder and pushrod in the Titan Model 10 Actuator. You will also need the Replacement Cylinder Cover for Titan Model 10 and 20 Actuators, part # T1507000.
I have included product descriptions and video demo links below.
Products Referenced in This Question
Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Accessories and Parts
- Brake Actuator
- Hydraulic Drum Brakes
- Master Cylinder
- Dexter
more information >
Replacement Cylinder Cover for Dexter Model 10 and 20 Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Master Cylinder
- Cover
- Dexter
more information >
Product Page this Question was Asked From
Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Fabrication Coupler
- Weld-On
- 12500 lbs GTW
- 2-5/16 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Search Results: rg06~070
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer
- Search Results: kodiak 225 brake caliper
- Search Results: 412920
- Search Results: lubrimatic wheel bearing grease
- Q&A: Direct Replacement for Titan 225S Brake Caliper
- Search Results: grease
- Shop: Grease Seal - Double Lip - 2.250" ID - 3.376" OD - GS-2250DL
- Shop: Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs to 6,000 lbs
- Shop: Grease Seal
- Shop: Grease Seal SL175
- Shop: Kodiak Ceramic Brake Pads - 3,500 lbs to 6,000 lbs
- Shop: Replacement Shock Absorber for Dexter Model 60 Brake Actuators
- Video: Review of Dexter Axle Brake Actuator - Master Cylinder and Pushrod - DX66FR
- Video: TruRyde Double Lip Grease Seals Review
- Video: Review of TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-070
- Search Results: t1848700
- Video: Review of Titan Brake Actuator - Replacement Master Cylinder for Disc Brakes - T4747100
- Q&A: Replacement P02860 Grease Seal For Lippert Axle On 2019 Keystone Cougar
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Troubleshooting Trailer wish Surge Brakes that Slams When Stopping and Starting
- Search Results: trailer harness
- Video: Demco Trailer Brakes DM5403 Review
- Video: Review of Reese Fifth Wheel King Pin - Upgraded Pin Box - RP78FR
- Q&A: Recommended Latch Repair Kit for a Dico 17550 Coupler
- Q&A: Replacement Coupler Solution for Dico 17550
- Video: Titan Brake Actuator T1608400317 Review
- Q&A: Inner Slide Assembly Recommendation for a Titan Model 10 Actuator
- Q&A: What Is Needed To Upgrade Brakes On Trailer With Tandem 7000 Lb Axles And Brakes On One Axle