Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks and DryDock Canoe Carrier
(217 reviews)
Price: $11.23
In Stock
Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks and DryDock Canoe Carrier
Item # Y8890200
Retail:$15.99
Our Price: $11.23
You Save: 30%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (217)
- Q & A (0)
- Photos
Yakima Accessories and Parts - Y8890200
- Hitch Bike Racks
- Hardware
- Yakima
- BigHorn
- HoldUp
- OnRamp
Replaces your threaded hitch bolt and clip for your Yakima HoldUp for 2" hitches, OnRamp, BigHorn3, BigHorn 4 made between 2000 - 2003, or Getaway bike rack or for your Yakima DryDock canoe carrier.
Features:
- Replaces the threaded hitch bolt and clip for your Yakima HoldUp for 2" hitches, OnRamp for 2" hitches, BigHorn3, BigHorn 4 made between 2000 - 2003, or Getaway bike rack or for your Yakima DryDock canoe carrier
- If your BigHorn 4 bike rack was made after 2003, you will need 8780022 (sold separately)
- Includes 1 threaded hitch pin, washer, and clip
Specs:
- Hitch bolt dimensions:
- Overall length: 4-9/16"
- Usable length: 3-1/2"
- Thread dimensions: 1-3/8" long x 5/8" diameter
Fits:
- Yakima bike carriers:
- HoldUp for 2" hitches: 8002419, 8002433, and Y02443
- OnRamp for 2" hitches: 8002706
- BigHorn3: 8002524
- BigHorn 4 made between 2000 - 2003: 8002513
- Getaway: 8002527
- Yakima canoe carrier:
- DryDock: 8002449
Note: If your BigHorn 4 bike rack was made after 2003, you will need 8780022 (sold separately).
8890200 Replacement Hitch Bolt and Clip for Yakima Hold Up, Big Horn, and On Ramp Bike Carriers and Dry Dock Canoe Carrier
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks and DryDock Canoe Carrier - Y8890200
Average Customer Rating: 4.9 out of 5 stars (217 Customer Reviews)
Replaces your threaded hitch bolt and clip for your Yakima HoldUp for 2" hitches, OnRamp, BigHorn3, BigHorn 4 made between 2000 - 2003, or Getaway bike rack or for your Yakima DryDock canoe carrier.by: SoFlo104/05/2024
I am using this as part of a hitch extension for my hitch carrier on my jeep wrangler and this works great to secure the hitch extension.
by: Kathy 02/12/2024
Always a pleasure to purchase from e-trailer! The website is easy to navigate, and the customer service is superb.
by: Nicolas04/26/2024
Perfect fit for my old Yakima ROC'nGate (2001-2003)
by: Kevin 03/15/2023
As always . On time. Exactly what I ord ered
by: Andrew12/21/2023
Great service. Had to do an exchange and it was handled very efficiently.
by: M.G.08/08/2023
Over the winter I misplaced this bolt. I contacted Yakima support. They were out of stock, but referred me to eyraer for thhe part. Syracuse let is great. The price was very reasonable and shipped quickly. I highly recommend them.
by: William04/28/2024
Easy ordering from website. Fast delivery on item needed.
by: Steve 05/01/2024
Just what we needed. Thanks
by: Uly C.02/07/2017
Perfect product for the part that I'm looking for my Yakima hitch threaded bolt, I ordered the wrong size and talk to costumer service Lisa D. And she give me info for return products no questions asked and replaced the right size that I'm looking for.
Thank you so much etrailer.com.
by: Sharon 04/12/2024
Website gives clear dimensions. Very fast shipping.
by: David 06/24/2023
James was extremely helpful in identifying the part I needed for a discontinued Yakima bike rack. The correct part was delivered on time.
by: Brian 06/25/2023
The only place I could get the right hitch pin for my Yakima bike rack.
by: Ethan 05/25/2023
Arrived in a timely fashion, and is the perfect bolt for a 2" hold up 2 Yakima bikerack.
by: Cynda06/02/2023
this was the bolt I needed for Yakima S wingaway
by: Jay D05/15/2023
Solid hitch bolt. The threads were straight and pin is blemish free. A+
by: Fred H08/31/2016
My Yakima hitch which I purchased back in 2003 had a hitch pin that worked with a Yakima hitch pin lock on my previous vehicle. I purchased a Toyota Tacoma with a factory hitch and the the original hitch pin was not long enough to allow the lock to be attached to the pin. This new pin which has a longer shaft solved the problem and I can now use the hitch pin lock again to lock my Yakima bike rack to the hitch.
Fred H.
10/27/2017
The product has worked fine and I dont expect any issues with it in the future. Thanks for checking.
by: Bobmp06/20/2014
The Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier - 2" Hitches - Y889020 was purchased for a used bike rack I purchased was missing. Unfortunately it was the wrong size, I had to purchase a different nut to fit the both. Yakima needs the list bolt size and number of threads so customers can tell if it will fit.
Bobmp
6/20/2015
Still working fine!
by: Dennis10/16/2022
5 Stars!!! This hitch bolt was spot on as it fitted my very old (20+years old) Yakima bike rack; stated dimensions were great as it allowed me to utilize locking mechanism at the end of hitch bolt
by: Richard10/10/2022
The part was sent timely and arrived in good condition, but it was not the right pin for our bike rack. This pin was too large around for the bike rack hole opening.
Andrew N.
10/14/2022
Sorry this didnt end up working for your bike rack. If you can let me know which rack you have then Id be happy to help!
by: Stephen P.06/20/2015
Needed a threaded hitch pin for my old Yakima bike carrier. The original that came with the carrier was too short for my Toyota Tundra that allowed the locking device to work. This part was exactly what was needed, worked perfectly! Ordered on Sunday, shipped on Sunday, arrived in just a few days. At a great price too! Thanks etrailer.
Barret
3/7/2016
Stephen, I am having a problem with my old Yakima bike rack pin being too short for my 2015 Tacoma. Is this one longer than the original Yakima? The description isnt too clear on that. Any feedback is greatly appreciated.Thanks
by: Eric J06/02/2019
Ordered a hitch for our 2014 Hyundai Santa Fe Sport. Works great. Then ordered a Yakima hitch-mounted bike rack. Also works just as advertised. Changed hitch mount from 1-1/4” with adapter to a straight 2” shaft. Much cleaner fit (no rattling). Needed the bolt/nut for the new configuration. Fantastic customer service & assistance with finding the best accessories for my stated needs. Etrailer.com, all the way!
by: Jim 03/03/2023
Received the hitch pin today and it was just as advertised. Thanks.
by: Thomas07/24/2020
Had to replace my original hitch bolt for the Yakima KingPin 4 on my 2020 Subaru Outback XT with dealer installed OME hitch. What I found was that the hitch 2 inch receiver opening walls were thicker than most other hitches, thus my original hitch bolt would not fit and allow for the use of my Yakama lock for the hitch bolt. This item is about 1.5 inches longer - thus worked perfectly. Hope this helps other Subaru owners.
by: Allen07/04/2018
Hitch pin Y8890200 fit my 2 inch receiver hitch as my existing 1 1/4 hitch sized pin was too short. Etrailer's web page helped me understand this part plus part 8880580 were both necessary to swap the tongue on my Yakima 2 bike tray style bike carrier as my new vehicle has a 2 inch hitch instead of the 1 1/4 hitch of my old vehicle. In my case, the new hitch pin Y8890200 needed a 24 mm wrench where the old hitch pin needed a 19 mm wrench.
by: John 11/12/2022
Excellent company to buy from, great costumer service, and shipping! My go to for everything trailer…
25
217
Show More Reviews
See what our Experts say about this Yakima Accessories and Parts
- Yakima HoldUp 2 Hitch Pin Clip ReplacementThe Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers # Y8890200 doesn't require the clip as the threaded bolt works to secure the rack. If you really want the pin, you can use the Hitch Pin Clip - 1/2" - Qty 1 # 37201131 which will work well but is made by a different manufacturer. If you want even more security, you can add the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235 that replaces that clip and adds a lock for greater...
view full answer... - Dimensions of the Replacement Bolt and Clip for Yakima Bike CarriersThe pin you mentioned is the Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers # Y8890200. This replaces a threaded hitch bolt and clip for a Yakima HoldUp (Y02419, Y02433, or Y02443), Yakima BigHorn 3 (8002524), Yakima BigHorn 4 made between 2000 and 2003 (8002513), or Yakima Getaway. Also works for Yakima DryDock (Y02589) boat carrier. This is used to secure the bike rack to the hitch. Hitch bolt dimensions: Overall length: 4-9/16" Usable length: 3-1/2" Thread...
view full answer...
- Can the Yakima Hold Up Spine Be used to Make a Rack using a Hold Up Plus 2I do not see why you could not take the trays from the Plus 2 and attach them to this spine to get a complete 2 bike rack. I spoke with my Yakima contact and she said you should be able to do it, but if you want to make it a true Hold Up, you will need some extra parts. The spine, part # 8890277, does not come with the cable or the hitch pin that the Hold Up comes with. The cable, if you wanted to add it, is part # Y8890202. The lock for the hitch pin is part # Y07235. And finally, the...
view full answer... - What is the Length of the Thread Bolt in the Yakima Replacement Hitch Bolt and ClipI went out to the warehouse and pulled Replacement Hitch Bolt and Clip # Y8890200 to measure it. From under the bolt head to the end of the pin it measures 4-1/4 inches. And to the center of where the clip would go it measures 3-9/16 inches. If it is not long enough to be able to put the clip on the end of the pin it is actually still permissible to use the pin. As long as it is properly tightened down you do not have to put the clip on. The clip is a fail safe.
view full answer...
- Thread Diameter and Size plus Bolt Head Dimensions for the Replacement Hitch Bolt # Y8890200I went and pulled a Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier # Y8890200 from our warehouse to measure and found that the bolt has 5/8 inch coarse threads and the size wrench you would need to use to tighten it would be 15/16 of an inch.
view full answer... - Replacement Anti-Rattle Hitch Bolt For Old Yakima ROCnGate 4-Bike RackIt sounds like the anti-rattle hitch bolt in your old Yakima ROC'nGate is causing issues by not tightening up all of the way. Assuming the bolt itself is what is bad you can just replace it with # Y8890200. When it comes to replacement parts for this older rack the only available parts are the anti-rattle bolt mentioned above, the Replacement Rubber Straps # Y8820103, and the Replacement Lock Body # 8820048. However the threaded portion of the bike rack is not replaceable so if those...
view full answer... - Replacement Hitch Pin for Yakima King Pin 2 with 1-1/4 Inch Receiver ShankFor your old King Pin 2 bike rack with 1-1/4 inch shank, the Replacement Hitch Bolt and Clip for Yakima HoldUp and BigHorn Bike Carriers # Y8890200 is the correct replacement. If you want to have the lock, I recommend adding the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235.
view full answer... - Replacement Threaded Hitch Pin Recommendation for a Yakima Bighorn 4 RackThere's a chance it might, but you would have to try it and see since we don't test the compatibility of the different threaded pins in different racks. The correct threaded pin you would need for a Yakima Bighorn would be the part # Y8890200 that you referenced.
view full answer... - Availability of Longer Hitch Pin for Yakima Bike RacksThe part # Y8890200 is 4-1/2 inches long which may be longer than what you currently have since some of the pins are only 4 inches long.
view full answer... - What Is Bolt Size Of Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Bike Rack # Y8890200The Yakima Replacement Hitch Bolt and Clip for Yakima HoldUp Hitch Mounted Bike Carrier, part # Y8890200, is a 5/8 inch bolt. The size wrench you would use to install or remove this bolt is 15/16 inch.
view full answer... - What Comes with the Yakima Replacement Spine AssemblyWhat comes with the Yakima Replacement Spine Assembly part # 8890277 that you referenced is what you see in the product picture that I attached. You would need to reuse the installation hardware from your current rack to install this on your Yakima Holdup bike rack. For a hitch bolt you would want the part # Y8890200. For a lock for the bolt you would want part # Y07235. This spine is designed to fit the older generation of the HoldUp manufactured through late 2012. If you have the newer...
view full answer...
- Threaded Hitch Pin Recommendation for Fitting Yakima Hitch Bike RackIf you are looking for a threaded hitch pin for a Yakima bike rack most likely what you need is the part # Y8890200. The Swagman threaded pin # P5901 would not fit a Yakima bike rack.
view full answer... - Parts Needed to Convert Yakima HoldUp Plus 2 into a Yakima HoldUpIt is possible turn the Yakima HoldUp Plus 2 # Y02446 that you have into a Yakima HoldUp # Y02443. You need to purchase the replacement spine # 8890277 and the hitch bolt # Y8890200.
view full answer... - Differences Between # Y8890176 and # Y8890200 BoltsYakima Mounting bolt # Y8890176 is a 1/2 inch bolt, which measures 4-9/16 inches long. This bolt works with the following bike carriers: Yakima FlipSide (Y02426), DoubleDown 2 (Y02423), DoubleDown 4 (Y02424), DoubleDown 5 (Y02425) BigHorn 4 (Y02405), DryDock (Y02589), HoldUp (Y02434) or SwingDaddy (Y02422). I also took some measurements of Replacement Hitch Bolt and Clip # Y8890200. It measures 4-1/4 inches long. The bolt is a 5/8 inch bolt. This bolt works with the following bike carriers:...
view full answer... - Replacement Hitch Bolt and Pin for Yakima Bighorn 5I spoke with my contact at Yakima and part # Y8890200 is the replacement hitch bolt and clip that you will need for your Bighorn 5 bike rack that fits a 2 inch hitch. The Replacement Hitch Bolt, Nut, and Clip, # Y8780022, is made to be used with the Bighorn racks manufactured after 2004 and has not been tested for use with the Bighorn 5.
view full answer... - Will Replacement Hitch Bolt and Clip, # Y8890200, Fit Yakima BigHorn Bike Racks Made Before 2004Yes, the Replacement Hitch Bolt and Clip, # Y8890200, does fit the Yakima BigHorn bike racks for a 2 inch hitch made before 2004.
view full answer... - Availability of Longer Yakima Hitch Pin BoltWithout knowing what bike rack you have it's hard to say what pin you would have currently, but I did speak to my contact at Yakima and she said that the part # Y8890200 is 4-1/2 inches long which may be longer than what you currently have since some of the pins are only 4 inches long. The number you mentioned is not a standard part number for a bike rack.
view full answer... - Correct Parts to Convert Yakima HoldUp Bike Rack With a 1 1/4" Shank to a 2" Shank The good news is the Replacement 2" Hitch Shank for Yakima HoldUp Bike Racks # 8880580 is the confirmed correct part from Yakima to convert your HoldUp to a 2" shank. According to Yakima, you're also going to need the Replacement Hitch Bolt for Yakima HoldUp 2, OnRamp, and BigHorn Bike Racks and DryDock Canoe Carrier # Y8890200.
view full answer... - What Hitch Pin Lock Fits the Yakima LongArm Truck Bed Load Extender? Yes! If you have either the Yakima LongArm # Y01149-1150 or the # Y01149, the locking hitch pin you need is the Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System # Y07235. This hitch lock attaches to the hitch bolt that comes with the LongArm. If you need the replacement hitch bolt itself, that is the # Y8890200.
view full answer... - Replacement Anti-Rattle Hitch Bolt for Yakima FourTimer Bike RackFor the Yakima FourTimer, you'd use the # Y8890200 anti-rattle hitch bolt. I've confirmed this with Yakima.Y8890200
view full answer... - Pin para sujetar porta bici al tiro de arrastre/Pin to attach bike rack to tow barParece que necesita el pasador de enganche que sujeta el portabicicletas Yakima en el enganche de su vehículo. El pasador correcto depende del tipo de portabicicletas que tengas. Si tiene un portabicicletas colgante, entonces el pasador de enganche de repuesto para portabicicletas de estilo colgante Yakima # 889-0231 es el pasador correcto. Si tiene el bastidor de plataforma Yakima HoldUp o BigHorn, lo que necesita es el perno de enganche de repuesto y el clip # Y8890200. Para la llave,...
view full answer... - Replacement Hitch Bolt and Nut Retainer for Yakima FourTimer Bike RackWe do have what you need but I checked with Yakima for you and the part you mentioned will not work with a Yakima FourTimer bike rack. Instead, there are a couple of parts you that you need, and I verified this with Yakima for you: - Replacement Hitch Bolt and Clip # Y8890200 - Replacement Nut Retainer # Y90254
view full answer... - Replacement Hitch Bolt for Yakima ROCnGate Bike RackThe correct replacement hitch bolt for your Yakima ROCn'Gate is part # Y8890200. The hitch bolt has been modified over the years to accommodate Yakima's newer bike racks, but my technical contact at Yakima assured me that this will work with the ROCn'Gate.
view full answer...
- Replacement Anti-Rattle Hitch Bolt for Yakima 4-Bike Hitch RackHitch bike racks typically use a special proprietary threaded anti-rattle pin to remove excess play and sometimes to also lock the rack to the hitch. Usually these threaded locking anti-rattle bolts are specific to the particular bike rack model you happen to have. The part you referenced # Y90175 is for a rack's tilting function, not for securing it in the hitch. All such anti-rattle parts appear on the linked page, such as part # Y8890200 which fits their 4-bike Big Horn racks made between...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Written by:
Tyler C
Video Edited:
Jacob T
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Noah M
Updated by:
Carrie F
Installed by:
Cole B
Installed by:
Evangeline M
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kevin H.
3/16/2024
Just like everything ive purchased from E. Perfect!