Replacement Anti-Rattle Hitch Bolt for Yakima FourTimer Bike Rack

Question

Question:

Hi - Im looking for the mounting bolt for a Yakima Four Timer. I see several on your site but I dont know which one is the right one. Can you please advise.

asked by: Franz W

0

Expert Reply:

For the Yakima FourTimer, you'd use the # Y8890200 anti-rattle hitch bolt. I've confirmed this with Yakima.Y8890200

expert reply by: Mike L

0

Answer 1

Yes, we can ship the Space Dock 2" Receiver Adapter for Torklift Palomino Landing Pad Bumper part #TLA7900 to you in Canada! However, the quoted shipping costs does not include all brokerage fees and duties. Taxes are not included and all prices…

view full answer...

Answer 2

We do have what you need but I checked with Yakima for you and the part you mentioned will not work with a Yakima FourTimer bike rack. Instead, there are a couple of parts you that you need, and I verified this with Yakima for you: - Replacement…

view full answer...

Answer 3

Comparing Yakima Hitch Pins for 1-1/4 inch receivers #Y8880129 and #Y8890176, they looked identical to me, so I contacted Yakima and they are in fact identical parts. They just give different numbers to them for some reason, but the diameter, pitch,…

view full answer...

Answer 4

Yakima Mounting bolt #Y8890176 is a 1/2 inch bolt, which measures 4-9/16 inches long. This bolt works with the following bike carriers: Yakima FlipSide (Y02426), DoubleDown 2 (Y02423), DoubleDown 4 (Y02424), DoubleDown 5 (Y02425) BigHorn 4 (Y02405),…

view full answer...

Answer 5

Yes, I checked with Yakima and the Replacement Hitch Hardware for Yakima HoldUp Bike Racks part #8890260 will work with the Yakima FourTimer 4 Bike Platform Rack part #Y02469. The Yakima and the Replacement Hitch Hardware for Yakima HoldUp Bike Racks…

view full answer...

Answer 6

I checked with Yakima and for their Fourtimer bike rack part #Y02469 the correct hitch bolt is the part #8890260 and then for the matching lock assembly you'd need the #8820048.

view full answer...

Answer 7

Please see below for our full list of replacement products for the Yakima FourTimer #Y02469 Bike Platform Rack. Replacement "A" Wheel Tray Assembly for Yakima TwoTimer and FourTimer Bike Racks - Qty 1 #8880796 Replacement "B"…

view full answer...

Answer 8

The Yakima HoldUp Bike Rack for 4 Bikes - 2" Hitches - Frame Mount Item #Y02443-2 does come with an anti-rattle hitch pin and lock included to secure the HoldUp to your vehicle. The threaded pin reduces movement of the rack in your hitch and…

view full answer...

Answer 9

There is definitely a way to lock your Yakima bike rack to your hitch. The Yakima HitchLock #Y07235 is designed to fit both 1 1/4" and 2" hitch pins and will get you all squared away. However, if there are already locks on your bike rack…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Replacement Anti-Rattle Hitch Bolt for Yakima FourTimer Bike Rack

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching