Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the mounting hardware for Yakima HoldUp bike rack (Y02419, Y02433, or Y02443).
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys, Zach here at trailer.com. And today, I'm going to be showing you the Yakima HoldUp hitch hardware kit. Now, this is a great replacement if you've lost or damaged any of the hardware for the hitch mounting portion of this bike rack. So we lost our pin here in the shop and while we we're trying to find the one that worked, we stripped out the anti-rattle threads on the inside of this shank. So I'm going to walk you through how to just do the whole replacement.And before we get started, I'm going to show you everything that comes included with this. So it's going to come with a new anti-rattle bolt, a clip, a lock washer, and a new nut that's going to go on the inside of this piece here, that slides down in the shank.
And that's what our bolt we'll thread into. And the only tool I'm going to need today is just a small flat-head screwdriver. And if we come in close, I'll show you how to get this old one out.On each side of the shank, there's going to be these small holes. And essentially what we're doing is we're going to push this piece in, and we're just going to pry it until we can get it up out of those holes. All right, I've got it loose.
Just keep prying it up. Let's see, I broke that one coming up, but this was already stripped out anyway. So next, we can take our nut and this plastic housing here, and I'm going to drop it in, put it in place. And then I'm just going to put it down in there, and then we'll squeeze this top right here so it gets inside the shank, and it's pretty tight. That way it holds itself in place.
Might take a little bit of pressure there. There we go. And then that's just going to lock in place and then we can take our bolt, put that lock washer on there, it's just going to thread right in.And then we can just secure it with that clip on the other side. But also, since this bike rack comes with a lock, that's going to work out just fine. So as you can see, I got this bike rack up and running in just a matter of minutes, it's going to save you a ton of money, so you don't have to buy a whole new bike rack.
And we did this on a two-inch version, but we also have the inch and a quarter version of the anti-rattle bolt replacement, if you need that.But overall, this was really quick and easy to get this back to normal. All I needed was a screwdriver. If you need just the nut or the plastic housing that goes on the inside of the shank, we sell that by itself. But I think just getting the whole kit is a good idea, so you at least have a spare bolt just in case the original comes up missing.Yakima makes a lot of different replacement parts for this bike rack. We offer stuff like the straps, and cradles, and cable locks. So if you have any kind of issues with it, we're here to help you out. Yakima builds these with the intention of you holding onto them for a long time. So if you have any questions on getting your bike rack fixed, just let us know. But that's going to do it for our look at the Yakima HoldUp replacement hardware kit for your hitch.
Average Customer Rating: 4.9 out of 5 stars (81 Customer Reviews)
Replaces the mounting hardware for Yakima HoldUp bike rack (Y02419, Y02433, or Y02443).1) the etrailer product information, in particular the how-to video and customer comments, greatly helped me select this part as a replacement for my very old out-of-production hitch rack.
2) After USPS messed up the delivery, etrailer customer service was awesome and quickly resent the part in time for a planned roadtrip with the old rack.
The hitch plug and nut fits my hitch ball mount perfectly after drilling two small holes for plug pins to snap on. Now I can use the Yakima hitch bolt and lock on both Yakima Holdup rack and trailer hitch ball mount with security and without rattle. Great product with multipurpose.
This kit works perfectly as an anti-rattle bolt for a 2" receiver hitch as suggested by other users. Etrailer has the best customer service ever!
Very good fit, excellent price, quick d elivery.
This works perfectly for my Yakima HoldUp 2 with 2” receiver. Very fast shipping and took less than 5 minutes to remove the previous bolt that was tightened too tight by the previous owner and replace this entire replacement hitch hardware. I had actually order the wrong part online. A quick call to customer service George J, and he setup the correct part for me at a 30% savings over the wrong part I had placed on line. I highly recommend this company!,
This replacement part was a perfect fit to our worn out one, and easy to install. It's actually an upgrade to the Yakima standard bolt as the bike rack is tighter on the truck hitch and doesn't bob around as much as before. I like to really tighten the bolt down to prevent theft of the bike rack since we've found the cotter pin on the ground a few times when returning to the truck and after a year no unusual wear and tear on this replacement part.
Paul
12/18/2022
I dont see much wear on this part even after another season of using it nearly every weekend. Easy on, easy off with the proper tools that is.
So glad etrailer had this item as Yakima does not! I got this to replace stripped bolt and nut on my Yakima Backswing and it was a perfect fit.
Worked great with my older holdup 2. Mo del.
Excellent holding power. Happy with this simple antirattle bolt.
It was easy to install and dropped right into place.
This brought my old Yakima hitch style bike rack back to life. My rack was made prior to the newer style plastic block that holds the nut in place. I didn't want to drill the rack, so I reused the old plastic block that press fits in. The new nut is the same size and fits in the old block. Thank you to Brenden at etrailer for all your help getting these ordered for me.
These Yakima replacement parts worked perfectly in the bike rack .when I bought the used bike rack these items were missing so I started my search on the web.. I had ordered a Hitch recently and never really thought about bike rack parts on this site, but when I put the model number in the web search and etrailer popped up I went on their site and found everything I needed quickly and at a great price... And the rest is history..I wouldn't hesitate on ordering from etrailer again if I needed anything elsenope.
They were exactly what I needed and the price was the lowest that I found so I bought two of them. They came fast and on time, what more can you ask for. I really appreciate the great service!
thank you for your quick response with my order. I put the hardware on my rack and it works perfectly. Before I found you on line i tried a number of times to get in touch with Yakima on the phone to no avail. your service was excellent.
I will pass your information on to my friends and family for their future needs.
Scott
It was less expensive to buy the whole assembly than just the bolt. Prompt shipping. thanks for everything.
For some reason the bolt that came with my Yakima hold up two rack wouldn't thread properly, so ended up stripping that and the retainer piece. The replacement from etrailer worked perfectly first try. Shipping time ended up being longer than expected, but not horrible.
Everything fits as described. Bolt pin fits my 2" Yakima Holdup Tongue.
Sky N.
2/12/2019
2 Yakima Holdup Tongue is still woking fine and solid for 4 bikes setup.
I was in a pinch I stripped my hitch bolt and locking nut right at the start of biking season. I called Yakima about getting a replacement part.....they were out of stock. Thank goodness for etrailer. They had the part in stock and shipped it out promptly. I am back in business.
Piece is as described and new original from Yakima. Great fast shipping and aftercare as I had some issues with replacement on my end. Thanks etrailer!
The product itself is just fine. The customer service at etrailer is second to none. They did not have the part I needed ... contacted yakima... put the part on the website, emailed me with the new part, accepted my return and kept me informed the entire time. 22 years in retail and I am astonished that there are still businesses like this one. 2 Thumbs way up.
Works perfectly! Yakima and our local bike shops said 4-8 weeks for this part. etrailer had it on our doorstep in 4 days. It was exactly what we needed to get our bike rack working perfectly again. Top it all off with some great customer service, and I'm sold on etrailer. You are my new favorite bike shop.
Purchased Yakima part - 8890260 to install on Yakima 2" tongue (8880580). It turned out the tongue has one pre-installed. Instead of returning, I incorporated the part and my 2" trailer hitch ball mount using Yakima's anti-rattle concept. It turned out great. Trailer hitch ball mount is now secured with Yakima pin with lock and no more rattle.
The product was perfect. It worked as intended and was very easy to install. It worked on the Yakima Hangover.
I needed some replacement parts for an old Yakima HoldUp bike rack. etrailer had exactly what I needed.The parts were perfect.
I looked everywhere for this replacement Bolt even ordered the incorrect one from [online retailer]. Support spent at least 20 Mins helping me find the correct part.
This is the reason I purchase from etrailer.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sn92703
5/7/2022
Its been a year and its still strong and perfect performance.