Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replace the secondary pull pin assembly for your Yakima Two Timer (Y02468), Four Timer (Y02469), or OnRamp (8002706 or 8002707) bike rack. Pull this gray pin on the stinger of your rack to engage the tilting mechanism on your rack.
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey everyone, it's Evangeline, and today we're taking a look at the Replacement Secondary Pull Pin for your Yakima Bike Racks right here at etrailer. So we actually have Yakima OnRamp right here, and this is the original part that came with it. Now the cable got snagged and was pulled off of the pin. So what happens is when we take the pin out, you're just gonna have to hold onto it or lose the pin. So if that has ever happened to you, here's the replacement part for it. So this has the gray knob, you have your 16 millimeter barrel, you have your little push pin there and then you have this cable to secure it to the rack.
This also has a coating or a plastic cover over that metal cable, which is good because I definitely scratched up my thumb with the old one. This does not include the mounting hardware, so hopefully you still have yours on your bike rack. And you're also going to need a T30 sized torx wrench to loosen that bolt. So you'll find that bolt on this side of your OnRamp bike shank. And once that's loose, hold onto that bolt and that washer.
Now put your bolt in your washer through the cable of your new push pin and put that on your bike rack. With that tightened down, that's it. You are able to replace the secondary pull pin for your bike rack. So for the different parts of your Yakima bike racks we have the replacement parts for you. Hopefully this video will help you out with seeing what is included, what's not included, what you actually need.
If you need other parts, let's say these knobs for the track or parts of your wheel assembly, you can find them here at etrailer. Check out our pictures and check out our videos to help you out..
Average Customer Rating: 4.8 out of 5 stars (48 Customer Reviews)
Replace the secondary pull pin assembly for your Yakima Two Timer (Y02468), Four Timer (Y02469), or OnRamp (8002706 or 8002707) bike rack. Pull this gray pin on the stinger of your rack to engage the tilting mechanism on your rack.Easy to order and delivered quickly. I know I can rely on etrailer!
This product fit my Yakima bike rack perfectly. It helps hold the rack in upwards position which has helped stop the rattling and knocking the rack makes when my bike isn't mounted. The part was shipped out and I received it fast!!! In 2 days. Great service from this company.
This is a perfect replacement for the original. I just need to figure out how to secure it so I don’t lose this one too.
Lost the original after I failed to install it on my Yakima OnRamp bike rack. The new one I will install with not only the steel cable, but a bungee cord as well…. So it won’t be able to bounce off the pavement until it breaks.
Received in a timely manner! Was the exact part I needed! Thank you!
Easy to order and delivered in timely manner as always
As ordered. Thank you.
Quock delivery of exactly the item i ne eded.
Everything went well, parts in stock, shipping costs low, received parts in a timely fashion, installation was a perfect fit! Thanks for the excellent service.
Exactly what I Needed. Great customer s ervice.
I was pleasantly surprised to find this part available, ordered it and I was notified along the way of its delivery. It arrived ahead of schedule plus, it’s an original part so works perfectly. Thank you.
Same as the original.
First off, etrailer is awesome! They got my part to me quickly when I originally ordered it. The reason I ordered it in the first place is that there is a design flaw. The cable that is used to prevent losing the pin eventually gets chopped in half from shoving it into the rack over and over...and yes, you guessed it...you lose the pin. Also, the hole where the cable is attached is too far down on the pin. It needs to be in the head of the pin where it will not have any contact with the rack itself. This would also ensure that the pin is more secure in the rack since more of the pin is able to slide into the rack rather than stopping halfway. So heads up Yakima! I'm sure I will eventually have to order another one.
Bikinbeth
6/29/2022
Still using the same pin I ordered from etrailer! Thanks folks.
This is a part to replace one that was lost due to not being properly inserted. It fits perfectly with the only complaint being the sharp exposed strands of cable. Constantly pricking my fingers if I’m not really careful.
the pin works, it just needs a more thicker cable to it doesn't break off from where it is tied to, otherwise works as it should
Part delivered as ordered and on-time.
I lost this safety pin after only using my bike rack a few times. When I went to the site where I got the rack they were going to charge me over $16 for shipping of this $8 part. I called a dealer and he told me about etrailer. I was very pleased that they only charged $2.99 for shipping.
etrailer made it super easy to order my replacement parts and the parts arrived in just. Few days. The parts were wrapped approximately and arrived without damage.
Will order from them again in the future.
What I needed and arrived when promised.
Great service and rapid delivery!
I'll tell you if I order something on the 5th of the month and it's not there by the end of the month there's serious problems with the business. And worse yet is the reaction of the business when you call. They say give it another week. Their website said the product never left the building. This is a strange business.
satisfied with the overall purchase... quick and easy
The pin keeps the bike rack from rattling. I installed it in minutes. Thanks
Perfect execution. The right part, priced reasonably, delivered promptly--no fuss, no feathers.
Good pull pin… crazy long wait to get this pin!!!!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jeffrey P.
4/25/2024
The secondary pull pin for my ramp on 2 e-bike Yakima rack is working well, however it is easy to forget to attach this when finished loading 2 bike. The length of the stainless cable to attach this pin to the rack is such that if you forget to place it and drive away it will hit something as you drive and become detached and lost. It would be better to attach a shorter cable with elasticity to prevent this occurrence.