Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
(375 reviews)
Price: $25.26
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Retail:$39.23
Our Price: $25.26
You Save: 36%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that are ready to ship
- All Info
- Reviews (375)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- Limited 1-year warranty
Installation of Tekonsha Brake Controller Adapter
To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
This adapter plugs into the connector behind your vehicle's dashboard. The exact location of the plug may vary depending on your year, make, and model of truck.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
303100 Tekonsha Brake Control Wiring Adapter with 2 Plugs - Toyota
Replaces Tekonsha 3017-P and 3031-PItem # 3031-P
Installation Details
This Product Fits The Following Vehicles
- 2016 - 2023 Toyota Tacoma
- 2015 - 2017 Toyota Tundra
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Product did not meet expectations
Customer Reviews
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - 3031-P
Average Customer Rating: 4.9 out of 5 stars (375 Customer Reviews)
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.by: Armando M.02/10/2024
My Tekonsha P2 & wiring kit 3031-P for my 2017 Tundra Crew Cab arrived timely and installation was SUPER EASY. Connected my 27 foot trailer the same day to test it. Works awesome. Disappointed in Toyota for having a poor Brake Control System, but thankful Tekonsha was able to pick up the slack.
by: Jim S.07/14/2020
Get this cable for a simple, plug-in installation. You’ll spend more time hunting for the junction already wired into the truck harness than installing your brake controller. And after installed, no worries on loosening wire connections or electrical tape wrap unraveling.
by: DonnaMarie09/11/2023
I used this to connect a brake controller, ITEM TK63VR, to the brake harness under the dashboard of my husband's 2022 Toyota Tacoma SR5. It worked excellently and was very easy to do because the ends just snap right into the harness and the little ground wire fits right under the grounding screw. eTrailer's instruction videos are great, thats why this ol' grammy was able to do it herself! Thank you etrailer! PS I just wish that it was a foot longer.
by: Super Simple And Clean!03/19/2020
Wiring harness 3031-P on a 2015 Toyota Tundra, doesn't get any easier. I have cut and spliced several brake controller over the years. This is a lot cleaner and very easy.
by: Wayne 04/25/2021
Toyota Tacoma
The wiring harness is exactly what most folks need for an under dash or dash mount. I found that it was more convenient to access the brake controller emergency handle and see the brake controller if I took your metal mounting bracket and turned it upside down and mounted the controller on the left hand side of the steering wheel on top of the dash with a magnet taped to the dash. This allow me to remove the controller and move it between my Tacoma and Ford F150 easily. But in order to do this you need a longer wiring adapter, so you either cut the original wiring harness and splice in longer wires or buy two harnesses and cut off one end of each and splice that together. Very happy with both the harnesses and the Tekonsha P3 brake controller.
by: John04/29/2024
Day after I ordered this part I was contacted by the company to say that the part wouldn't be shipped for several weeks and they worked to get me a replacement solution. This ultimately did not work out but their customer care was something that has become a rare thing these days. I think the sales agent whose name I do not recall at the moment and a few days later got a notice that the original part I ordered was out for delivery. It arrived today I installed it in my vehicle and everything works perfectly. I would definitely do business with etrailer again for my RV needs. Thank you guys.
by: Leo 09/13/2023
2023 Toyota Tacoma
Installed my old Tekonsha P2 controller easily in the new truck in about an hour. Wire was just long enough to reach the preferred spot. Fantastic service as usual.
by: Karen07/06/2023
We love our Tekonsha brake controller. Works great on our 2018 Tacoma while pulling our 1025r John Deere subcompact tractor.
by: Reginald03/12/2020
Everything came in the package and the product came earlier than I expected. Installing it was fairly easy. However the only thing that proved difficult was Torquing the ball down on the hitch head which luckily [RV dealer] was good enough to do that for me. I am happy With the product and looking forward to using it.
by: Paul 08/13/2018
2018 Toyota Tacoma
The cable fits the desired application on my 2018 Tacoma. A couple of inches longer would have been nice - it was barely long enough for where I mounted the controller. The location shown in the pic was the only location that didn't get in the way of of knees, feet or air bags. By the way, the other item in the cubby is my ham radio faceplate.
by: Kenneth 01/07/2023
2015 Toyota Tundra
Delivered ahead of time and product is as expected.
Kenneth
1/8/2024
Perfect
by: Kevin 07/10/2023
Fit perfectly. did not have to cut into vehicle wiring harness and super quick install
by: Mark01/18/2020
2019 Toyota Tacoma
Easy installation. This unit is the best controller I have ever had. I utilized my existing inset compartment and just cut off the back of the compartment til I had about 2” remaining from the front flange to minimize the amount of space around the P3 controller when installed to have a better appearance.
by: Donald 03/31/2023
Made the install that much easier, take your time pulling off the side cover to get to the wiring harness. Seems like the bottom front plug gave me the most trouble but love how much difference trailer brakes while pulling a heavy load make.
by: Alex 09/22/2020
to be honest I bought this harness to modify it. I needed the plug that goes into the OEM port on the truck so I would not have to T Tap power to run accessories I simply would tie in my switches to this port to use for what I want. I still have not completed the install.
Alex
12/21/2021
great up and running and was able to fit this in without hacking up my OEM harness.
by: Gerald 08/01/2021
2017 Toyota Tacoma
Great, specifically for my truck and it plugged right in and worked without modification. Could not ask for better
Gerald
8/2/2022
Works fantastic, no problems, brakes the trailer with proper amount related to truck braking.
by: SLM-C04/23/2021
Great product. Used with Tekonsha Prodigy P3. Installed on a 2017 Tacoma to tow our 2020 T@B 400 teardrop camper.
Slm-c
5/2/2022
Excellent! Needed this to install my Tekonsha P3.
by: Victoria 09/16/2023
2023 Toyota Tacoma
Great product and super easy to install with the adapter.
by: Matt 02/13/2024
Excellent fit and function.
by: Shannon 02/27/2024
Received as expected ,, very well packa ged..
by: Carlos06/09/2019
2018 Toyota Tacoma
I bought this harness for my Toyota Tacoma 2018 because I installed breack controller Primius IQ and fit very Good. I’m so glad with the product, and etrailer is really fast to delivery.
by: Brian 02/06/2024
very easy to install
by: Luc R03/29/2019
Installation facile
Et le site internet tres bien fait
C'est mon 2e achat toujours un bon service
Bravo
by: JoeD03/19/2019
I bought this adapter to prove that my factory brake controller was not functioning properly. I am now using my old Prodigy P2 controller I was using on my previous truck n trailer, bypassed the factory unit on my current truck. Needless to say, it worked perfectly. My factory controller would not engage the travel trailer brakes no matter how I adjusted it. The P2 works with electric and electro over hydraulic brake systems. My truck has a button to select. My problem is in electric mode. If I switched to elec over hyd, the brakes lock up. I am going to the dealer to have him check the factory control and hear what they have to say.
Joe D.
3/19/2020
This adapter cable made it real easy to hookup the P2.Working great, been on a few trips after I got it. All good.I still have to follow up with Toyota about the stock controller.
by: Tim 11/16/2021
Wiring adapter fit great ! Eventually bought a bigger truck which had a built in brake controller and no longer need the wiring adapter.
25
375
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Does Either The Tekonsha P3 Or Redarc Tow-Pro Have Back Feed Issues On a 2020 Toyota Tacoma? You should not have any issues with either the Redarc Liberty # RED24FR or Tekonsha Prodigy P3 # 90195 brake controllers on your 2020 Toyota Tacoma. They resolved issues with these on the Redarc Pigtail # RED99FR and Tekonsha Pigtail # 3031-P when they added the additional grounding lug to these harnesses. Personally I feel the either the Redarc Liberty # RED24FR or Elite # RED44FR are the best choice as you can install these with the Mounting Panel # 331-TPSI-002 for a clean appearance....
view full answer... - Brake Controller Installation in 2019 Toyota Tacoma without Tow PackageThank you for your purchase of the Tekonsha PowerTrac Electronic Brake Controller # 39523. This will install in your 2019 Tacoma using the wiring adapter part # 3031-P which connects between the controller and the plug-in port under your dash. Since your Tacoma does not have the tow package you may need to install some fuses and relays to activate the wiring. The online owner's manual I reviewed does not provide a legend for the engine compartment nor passenger compartment fuse boxes so...
view full answer... - Brake Controller Wiring Harness for 2020 Toyota TacomaYou are correct, the right brake controller harness for the 2020 Toyota Tacoma is indeed the # 3031-P. The harness plugs into the white connector located behind the driver's side kick panel. I've provided a photo showing where the connector is located.
view full answer...
- Troubleshooting Tekonsha PowerTrac Brake Controller on a 2018 Toyota TacomaTo determine if your Tekonsha PowerTrac # 39523 is bad or not all you need to do is test the blue wire coming from the controller with a circuit tester like part # PTW2979. Put the power to the highest setting and then use the manual override to send power along the blue wire to your trailer brakes. If the blue wire on the PowerTrac isn't sending power but it is receiving power on the black wire then the controller is bad and you need to replace it. The PowerTrac and the Voyager # 39510...
view full answer... - Does Tekonsha Brake Controller Install Harness 3031-P Work with Prodigy P2 Brake ControllerYes, the Tekonsha install harness part # 3031-P that fits your 2019 Toyota Tacoma does work with the Prodigy P2 part # 90885 just like it works with the P3 part # 90195.
view full answer... - Recommended Trailer Wiring Harness for a 2017 Toyota TacomaI do have a plug-in trailer wiring harness that will fit your 2017 Toyota Tacoma but the plug you are referring to is not used for the trailer lights. For your Tacoma, I recommend the Curt T-Connector Vehicle Wiring Harness part # C56349 which actually plugs in behind the taillights as you can see in the attached instructions. This kit will provide you with a 4-way trailer connector. If you need a 7-way trailer connector then in addition to the Curt harness you are also going to need to...
view full answer... - Where to Mount Tekonsha Voyager in Interior of 2019 Toyota Tacoma TRDI looked up an interior picture of your 2019 Toyota Tacoma and there's an open area in front of the gear shift under the HVAC controls which would be the best place to install the Tekonsha Voyager # 39510 with the custom install harness for your truck part # 3031-P.
view full answer... - Can the Tekonsha Wiring Adapter Part 3017-P Work with a Tekonsha Primus IQ Part TK90160Yes, the Tekonsha plug-in wiring adapter # 3031-P you referenced will work with your Tekonsha Primus IQ # TK90160. The adapter # 3031-P will plug into the connector behind your 2015 Toyota Tundra's dashboard. A great feature is no hardwiring is required. I included a helpful article for you to view.
view full answer... - Recommended Trailer Brake Controller For A 2017 Toyota TacomaWhen installing a brake controller in your 2017 Toyota Tacoma The Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195 has an overall dimension of 3-5/8 inch wide by 4-5/8 inch long by 1-3/8 inch tall, the P3 controller can be mounted at a 360-degree vertical plane operating range. The P3 has 5 storable settings that let you customize the controller for multiple trailers, varying loads or different drivers. It also has 3 boost levels that let you adjust initial...
view full answer... - Which Install Harness Is Needed to Install P3 Brake Controller in 2017 Toyota TundraThe correct brake controller install harness for installing the Prodigy P3 brake controller part # 90195 in your 2017 Toyota Tundra is the part # 3031-P.
view full answer... - How to Install a Tekonsha Primus IQ Brake Controller in a 2015 Toyota Tundra SR5We have exactly what you need. In order to install your Primus IQ part # TK90160 in your 2015 all you need is the install harness part # 3031-P. This adapter plugs into the connector behind your vehicle's dashboard. To reach the connector, first locate the notch in the access panel in the center of the dash, near the driver's side. Using a trim panel puller, carefully pry the panel out and undo the locking tabs to remove the panel. You will find the mating connector behind this portion...
view full answer... - Brake Controller Installation on 2015 Toyota TundraAll models of the 2015 Toyota Tundra will have the brake controller connector located behind the panel just to the right of the ignition as shown in the provided video. For a Tekonsha brake controller, use the # 3031-P wiring harness. If you don't yet have a brake controller, I'd recommend the Tekonsha Primus, part # TK90160. The Primus is a proportional controller that will provide smooth, safe and predictable braking. A proportional controller will sense how quickly the tow vehicle...
view full answer... - If 2015 Toyota Tundra has Tow/Haul Mode is a Brake Controller NeededYes, the Tow/Haul button in your 2015 Toyota Tundra helps the transmission upshift and downshift in the best ways possible when towing but does not activate the brakes of the trailer which is really important. This feature does not replace the need for a brake controller. You will want to install the Prodigy P2 part # 90885 you mentioned and the correct harness to do this is the part # 3031-P which is custom fit for your truck. This controller senses how hard you are applying the brakes...
view full answer... - Troubleshooting Tekonsha P3 Brake Controller Installed on 2017 Toyota TundraThe first thing I'd recommend doing is unplugging the wiring harness from the rear of the controller and using a circuit tester like # 40376 to check the socket in the connector fed by the black wire. You should see a constant 12 volts on that wire, if you are not getting power on that circuit take another look at the fuse box under the hood. The lid of the fuse box should have a listing of which fuse protects which circuit. Look for 'Trailer tow' or 'Trailer Brake'. I'd also make sure...
view full answer... - How to Lengthen Tekonsha 3031-P Brake Controller Wiring Harness for 2020 Toyota TacomaWe do indeed have a solution for you. You can cut off the plug of the # 3031-P harness (the one that plugs into the back of the brake controller) and splice on the # 7894 which will add in about 34 inches of length for you. Simply used the provided butt connectors and the wires will connect together color for color.
view full answer... - Recommended Tekonsha Brake Controller Plug and Play Adapter for a 2019 Toyota TacomaThe Tekonsha Prodigy P3 item # 90195 is a great choice for your 2019 Toyota Tacoma. To install it in your truck without having to cut or splice wires you will want the Custom Wiring Adapter item # 3031-P. This adapter will allow you to have a complete plug and play installation and significantly reduce your installation time.
view full answer... - Brake Controller Recommendation for 2018 Toyota TacomaThe brake controller I recommend for your 2018 Toyota Tacoma is the Tekonsha BRAKE-EVN part # TK63VR which is very easy to use, reliable, and priced great. All you need to install this in your truck is the correct install harness part # 3031-P which plugs right into a port under the dash.
view full answer... - Brake Controller Installation on 2020 GMC Sierra 4500 Medium Duty TruckI spoke with several of our brake controller manufacturers, none of which had any specific information regarding how the 2020 GMC Sierra 4500 medium duty trucks are wired for a brake controller. A couple of them told me that there are bare wires or a plug under the dash, but none of them offer a harness or could tell me where exactly the wires were located. No worries though, we can figure this out. The connector you show in the photo appears to have 4 pins. I'd recommend testing the connector...
view full answer...
- Which Brake Controller Install Harness to Install P3 in 2019 Toyota TacomaThe correct install harness you need is the part # 3031-P to install the Prodigy P3 part # 90195 you have for your 2019 Toyota Tacoma. The 3040 you mentioned is for older Toyota trucks.
view full answer... - Harness Needed To Install Tekonsha Prodigy P3 Brake Controller On 2020 Toyota TundraIn order to install the Tekonsha Prodigy P3 Trailer Brake Conttoller part # 90195 on a 2020 Toyota Tundra you will need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3031-P. It looks like we've had a customer who used this on their 2020 Tundra and confirmed fit.
view full answer... - Install Harness for Prodigy P2 Brake Controller for 2015 Toyota TundraThe install harness needed for the Tekonsha Prodigy P2 part # 90885 in your 2015 Toyota Tundra is the part # 3031-P. The 3031-P actually replaced the 3017-P.
view full answer... - Recommended Brake Controller For 2016 Toyota Tacoma SR5For your 2016 Toyota Tacoma SR5, I recommend using the Tekonsha Prodigy P2 # 90885 that you mentioned. This is a proportional brake controller meaning that this controller will help your trailer brakes to respond with the same intensity and at the same time as you hit the brakes in your truck. This is a really nice feature and this normally makes the proportional controllers a little more expensive than the time delayed models. The P2, is one of our best sellers because of its function....
view full answer... - Wiring Adapter to Install the Primus IQ Electric Brake Controller in a 2017 Toyota TacomaWe have the harness you need to install the Primus IQ Brake Controller # TK90160 in your 2017 Toyota Tacoma but unfortunately it isn't the same as what your 2010 Tacoma uses. There was a generation change in 2016. The 2010 Tacoma uses adapter # 3040-P to install the controller. The 2017 model uses # 3017-P so this is the one you need.
view full answer... - Brake Controller and Installation Harness Recommendation for a 2015 Toyota TundraThe correct Tekonsha brake controller install harness you would need for a 2015 Toyota Tundra is the part # 3031-P. This would be the correct harness to use to install your P3 brake controller part # 90195.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Installed by:
Cole B
Updated by:
Wilson B
Updated by:
Michael B
Updated by:
Isabelle B
Written by:
Alexander C
Test Fit:
Robert C
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Wayne
8/1/2022
Working great! No problems at all.