To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Brad Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the vehicle-specific wiring harness, that will work in conjunction with the Tow-Pro Elite electric trailer brake controller. These harnesses are going to be great to work with your Tow-Pro Elite in a variety of different trucks and SUVs. Now, make sure that you get your vehicle-specific harness. You're going to want to use our fit guide on "etrailer.com", and that's going to make sure that you get the right harness, and that way your install goes nice and easy.
Included in the REDARC kit, you will find this plugin adapter, and this is going to have these spliced ends, and you're gonna have to tie into your brake signal, your brake output, your power output and your ground. Now, if you are pretty handy with electrical, that's awesome. That's great. You can use this. But I'm the kind of person, plug and play in OEM kind of setup or really nice factory one like this.
This is the vehicle-specific harness. So this ties in directly to our factory tow system, and clips right in, it's got this nice braided sheathing on it, to kind of protect the wires, and then it plugs directly into our module here. So, to save yourself a little bit of headache and time, and make the install go that much smoother, and not have to worry about loose connections, I highly recommend getting the vehicle-specific harness. So this end of the plug is specific to your vehicle. As you can tell, it looks like the factory plug, it fits in perfect, has the locking mechanism, so you aren't gonna have to worry about loose connections happening with your plug, and it's going to make install a lot easier.
And that was a look at the vehicle-specific harness for the Tow-Pro Elite electric trailer brake controller..
Average Customer Rating: 4.8 out of 5 stars (145 Customer Reviews)
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.Is a very easy install, The finish product is clean and easy to operate.
But most important, is your video; the installation video is clear on the installation and there was no hesitation on how to mount and connect everything.
Easy install. Installed on a 2017 Chevy Silverado. I like that it is out of site and more like a factory install. etrailer makes this type of project easy with great install videos .
This sure made things easy on my 2018 Silverado Tow-Pro Trailer Brake Controller installation-A simple plug and play install!
Ken H.
8/13/2021
Perfectly!
I cancelled these parts when it advised not compatible with my 2018 Silverado. The representative checked with supplier and advised me it work! The reason it wasn't correct is the control switch required a flat surface to install and everything on this years dash is curved therefore not allowing the tps1-001 lock in. It installed loose and looks really bad . Ref order number 120535085 and 120535494. I have purchased from etrailer in past but not sure in future.
Very easy to install, drill 2 small holes and insert the switch. There’s only 2 wire bundles, one between the switch and control box and one from that box to the truck that all plug in. It looks like it belongs on the dash. There’s several videos online for ideas of where to mount it.
They gave me advise on what was needed, it worked out. The brake controller is great, small and looks like it came as a stock install. A friend machined the hole so it would be the correct thickness. Bill did a perfect job.
The Redarc brake controller and harness showed up promptly. Per your information it was the correct harness, and after a little struggle, it plugged in, and it appears to be working correctly. The instructional videos were very helpful. We have not had a chance to test it fully yet, but manual control works fine.
I ended up installing it in a open area to the left of the wheel in my 2019 Escalade where the 4x4 controller would go if it were not two wheel drive.
Love this controller, nice clean look with performance to match. Wasn't wanting nothing crazy big and ugly to put in out Chevy tahoe for our camper so this small knob and under dash box makes it still look really clean.
Great products fast shipping
Bruce B.
3/28/2024
Works great I use it all the time
Works very well. I like the compact size.very happy with the product
It never worked! I had to tow a vehicle over 500 miles with no trailer brakes. I assumed that it was the trailer that I had rented that was malfunctioning. Needless to say five months later I needed to move another vehicle.I rented another trailer and no trailer brakes!
Brooke M.
2/16/2023
Yikes, that is not good! I am having our customer service team reach out to you about this as this harness comes with a warranty. Thanks for letting us know!
Easy install plug and play
Made the install of my Redarc brake controller very easy.
Shipping was fast! Install was a breeze, and looks great in my Tahoe! I have yet to use it but if it works as expected/advertised my 5 star rating will remain
Very good product. Easy to install and works great. Connected right into the GMC harness and system. No issues whatsoever. Highly recommended.
Neal
1/3/2023
Works great. No problems at all and super simple to install.
we put it in and used it to travel from ny to nevada twice and worked fantastic. We had no issues and was easy to set up.
Easy to install. I put the control knob where the factory OEM would be.
Steve
7/15/2022
still working great
Straight forward install. Hardest part is locating the control knob without permanently damaging a panel. I opted to replace one of my power outlets to accommodate switch. plug and play ready, controller flashed green/blue as ready to calibrate when tested
Great instructions and works great.
Great plug-n-play plug for my Silverado 1500 Trail-Boss 2022.
Not much to say about the harness other than it works.
Plug and play. Clean up the hole really well. The male shaft doesn’t stick out much, pretty much zero. I haven’t towed anything just yet.
Great controller put it under the dash out of sight works great.
I just received this and I can't wait to install it. It looks like it is a very high quality kit!
Works great. Easy to install
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Guy
3/6/2024
The brake controller has work flawlessly, it’s a very clean installation using the video.