Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
(76 reviews)
Price: $18.17
In Stock
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In
Item # 3014-P
Retail:$27.28
Our Price: $18.17
You Save: 33%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (76)
- Q & A (0)
- Photos
Tekonsha Accessories and Parts - 3014-P
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Tekonsha
- Vehicle Specific
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.
Features:
- Plug-in wiring adapter allows for quick, simple installation of your electric trailer brake controller
- No cutting or splicing required
- Custom connector end plugs into the built-in port beneath the dash of your vehicle
- Other end plugs into the back of your electric brake controller
- Compatible with time-delayed and proportional brake controllers from TrailerMate, Draw-Tite, and Tekonsha
- Brake controller must have built-in plug for adapter to connect - will not work on controllers with pigtail wiring harnesses
- 1-Year limited warranty
Installation of Tekonsha Brake Controller Adapter
To install your electric brake controller, you need to connect the wiring of the controller to your vehicle. Certain auto manufacturers offer pre-wired options, typically known as tow packages, wherein wiring is run for you from the dash to the trailer connector on the back of your vehicle. When this is done, a port is installed at your dash so that you can easily plug in a brake controller.
The connector is behind the black cover located to the left of the steering column, just above the carpet. To plug in the adapter, first remove the cover.
No hardwiring is required to install this adapter. After you plug it into the factory port, you simply plug the other end of the adapter directly into your electric trailer brake controller. Because there are no wires to connect, installation is not permanent. You can unplug and remove your brake controller at any time to transfer it to another vehicle or securely stow it away.
301400 Tekonsha Dual Plug, Direct Install Brake Control Wiring Harness Adaptor
Replaces 3014-P
Installation Details
This Product Fits The Following Vehicles
- 2014 - 2023 Jeep Cherokee with factory Tow Package
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In - 3014-P
Average Customer Rating: 4.8 out of 5 stars (76 Customer Reviews)
Install your electric trailer brake controller quickly and easily with this custom wiring adapter. Simply plug one end of the adapter into your brake controller and then plug the other end into the built-in port beneath your vehicle's dash.by: Henry K06/13/2016
2016 Jeep Cherokee
Just installed this item on my 2016 Jeep Cherokee Latitude 4x4. I have the original Tekonsha Prodigy brake controller.
First off, that factory plug: After you take the single screw off the panel above the driver's left foot, the is still a two inch plastic "finger" in a metal bracket still holding the panel up. Pull the panel toward you and bow the middle down to free the "finger." Also, the factory plug was not just dangling on my Cherokee as some on-line pictures seem to show. It’s in a soft plastic "keeper," so I did not recognize it right away. It is easy to pry out of the keeper with a small screwdriver.
There is not much room on the right side of the steering wheel by the driver's knees, plus there is a knee air bag there you do not want to impede.
So, I installed my controller (with the pocket mount attached) in the utility bin on the left side, above the hood release. The utility bin pops out and it's easy to fish the plug up to the opening created. I cut a hole in the back of the utility bin for the plug to go through, then popped the bin back in place. Put the plug through the empty pocket mount and plugged it into the controller. I snapped the controller into the pocket mount, then set that assemblage into the bin. It fits nice and snug side-to-side. I drilled two small holes near the rubber bumpers at the top of the bin opening and used a small bungee cord to hold the bin up against the controller, hooking the bungee ends into the holes. This keeps the brake controller secure. I still have plenty of knee clearance getting in and out and can easily see and reach the controller. If I remove the controller during the off-season, the utility bin will close fully with the controller plug inside.
Another option is to remove the utility bin altogether and improvise a controller mount in the cavity created. That would work for other controllers and take up even less knee room.
by: CJ02/10/2022
Cable was to connect a Primus IQ controller removed from my previous GM vehicle to my 2020 Jeep Cherokee with the trailer tow package. Jeep connector was not easy to find, a cover needed to be moved (one screw and some brute force). The Jeep connector was attached to a mounting bracket so it would not flop around, once snapped out of the connector the cable fit fine. Other issue was that the cable must go over the knee airbag. I presume if the bag blew, it would blow controller down to your feet. Couldn't find an area to mount it that didn't interfere with the airbag. Not the cable's fault. Whatever you do, do not screw your controller to the airbag cover.
I liked that no splicing was required.
by: Russ M.09/24/2019
This brake controller works fantastic! It’s everything I needed for the electric brakes on my travel trailer hauled behind my Jeep Cherokee. Being able to easily adjust for varying weight and driving conditions is awesome.
Installation is neat in appearance, but the vehicle’s mating harness was a b****h to reach.
by: Wanda 03/25/2024
The adapter arrived faster than was expected. The package was in great shape. It was an easy install.
Thank you
by: Sean S06/08/2017
2014 Jeep Cherokee
The pictures and videos on your site gave me the confidence to try this myself. I even improved upon the install showed on the website. The install took me less than 15 minutes, and by removing the small pocket " drawer" in the dash, a very low profile and smooth look was retained.
My local post office was undermanned and late with the product and customer service was excellent in helping me track it down.
I saved over $160 compared to what local retail establishments were quoting me... excellent job all around.
Thanks for exceeding all of my expectations.
by: David 01/14/2023
This adapter makes installation of the brake controller totally painless if you have a vehicle that comes with a trailer towing package. This adapter is vehicle specific and plug and play. Reduced installation time to just a few minutes. This is the only way to go.
by: Neal Pierce08/24/2016
Jeep
Worked perfectly. Easy to install. Only had to remove one screw under the dash and was able to bend the lower panel back enough to find the pigtail plug which was attached to the floor with a retaining bracket. I coaxed the plug out of the bracket and plugged the Jeep-specific connector into it relatively easily. To complete the connection I routed the wires through the left side tray in the dash where I plugged into the brake controller.
Neal P.
11/1/2017
Its working perfectly. Thanks for the follow-up.
by: S John07/25/2022
2022 Jeep Cherokee
Fast delivery. Easy install.
S J.
7/26/2023
Works great!
by: Jason07/25/2022
So, get this... This is a review related directly to the 2022 Jeep Cherokee Trailhawk. And, it really has nothing to do with a trailer brake controller. I used this part to plug into inside the cabin for power for my Yaesu FT-1900 mobile transceiver for amateur radio. And, it worked perfectly for this job. I connected it to some Anderson power plugs and an inline fuse, got it powering my radio without any trouble at all. So nice to have that power already located inside the cabin and I could bypass all the drama of running more wiring through the firewall, or using an add-a-fuse in the under hood fuse box.
This part is perfect for this job. If you need more details, look on my amateur radio related website I'll be posting more details on getting mobile radio working in the 2019-2022 Jeep Cherokee Trailhawk soon.
by: Dwight03/09/2023
2017 Jeep Cherokee
Product had great reviews. Plan on using it for our camper.cant wait for warmer weather to try it out.easy instructions.
by: Janine C.09/28/2014
2014 Jeep Cherokee
We received the trailer brake controller in record time, and it is perfect. Husband said the quality is exceptional and installation was a breeze. installed and functioning in 2014 Jeep Cherokee in no time! Couldn't be happier and will be ordering other parts and accessories from you in the future. Thank you!
by: Ron D.04/09/2017
2015 Jeep Cherokee
Bought this with Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional for my 2015 Jeep Cherokee, connection is perfect.
by: Harry 12/12/2019
2019 Jeep Cherokee
Wiring harness is the way to go. Installed on a new 2019 Jeep Cherokee and wouldn't want to be splicing wires with all the electronics on the new vehicles. Getting to the tow package plug was difficult, since I was uncertain of pulling/pushing to hard on the service plug in, the dealers service dept. was nice enough to remove the panel for me. It took them two tries to identify where the plug in was (with a trip to the PC to find the diagram) then a headstand under the dash to reach it (it was clipped into the wiring block somehow, not taped to the wires). Once it was in place, one zip tie completed the installation.
by: Bob10/30/2014
2015 Jeep Cherokee
The wiring harness for my 2015 Jeep Cherokee fit perfectly. Since my Jeep was prewired with a 7 pin plug as part of the tow package, the factory plug was right where the etrailer site showed it. It is basically a plug and play setup. I was very pleased.
by: Dr. Jim Hale10/17/2014
2014 Jeep Cherokee
Absolutely the easiest installation I've done in a long while. Etrailer.com is always courteous, knowledgeable, and quick.
I installed a P3 controller in a 2014 Jeep Cherokee with a factory-imstalled 7-pin connector.
by: Bob 08/08/2023
very pleased.
by: Andy R06/01/2017
This product went just as promised. There were no wiring to be done just plug it in and mount controller. Only real issue is getting under dash to plug adapter cord into vehicle but is not real tough.
by: Duane05/30/2017
2016 Jeep Cherokee
Website is easy to use. I purchased tow mirrors, brake controller and wiring harness. All were very quick and easy to install.
by: Dn12/14/2019
I needed a moderately priced brake controller for infrequent towing with my Jeep Cherokee Trailhawk. With "plug and play", the Primus was an appropriate choice. It fits well in limited space, gain adjustment is easy, and it performs as expected.
by: Kelly H05/20/2015
2015 Jeep Cherokee
Super easy installation and setup (purchased the adapter cable also...specific to my vehicle which has a factory installed tow package) Just plugged in, mounted with bracket and programmed. Clear instructions.
by: Hazel04/12/2020
2016 Jeep Cherokee
you guys were phenomenal! I was notified when the part was ready to be shipped, but etrailer does not ship to PO Box.(was that on form).
A phone number was provided for me to call and update to physical address. Got a live person, very helpful. Assured me the part would be there one day shipping. I was surprised i got it the next day early!.
only problem is, was the price..when i went back in the website...i was truly disappointed about how the price changed drastically from what i saw on website to what i was actually charged. I urgently needed the part, so i didnt question it then...
by: MarkD09/17/2017
2015 Jeep Cherokee
This product is misleading. I ordered for a 2015 Jeep Cherokee w/ OEM 7-way Tow package. This is for a 2014. It did not fit. I purchased the correct part from a local parts store. I would like to return this part but etrailer has not yet sent the required information after 3 weeks
by: CP02/06/2015
Jeep Cherokee
installed P3 in jeep Cherokee w wiring adater it was a snap. Dealer didn't have and brake controller for jeep and didn't know where or if it had wire from 7 way plug
by: Tom M04/20/2016
This brake controller works excellent, just as described. After using it twice I'm confident that my trailer brakes are doing their job. I would recommend it to anyone.
by: Hapa 07/03/2017
Easy install for hitch and wiring. Multiple parts ordered with breakable items. All items were unscathed and intact. Great service and packing. That's important to receive a great product.
25
76
Show More Reviews
See what our Experts say about this Tekonsha Accessories and Parts
- Where Does a Brake Controller Plug Into on a 2015 Jeep CherokeeYes, the factory brake controller port should be in that general area (behind the black cover located to the left of the steering column, just above the carpet) on your 2015 Jeep Cherokee but only if it came with the factory tow package. If it did not then the plug might not be there at all. It is possible that it is tucked up more under the dash or even further to the left considering how your Jeep Cherokee is equipped.
view full answer...
- Brake Controller Harness for a 2015 Jeep Cherokee with Factory Tow Package and Act III ControllerSince your 2015 Jeep Cherokee Latitude came with the factory tow package you can use brake controller wiring harness # 3014-P. The harness is also compatible with your Draw-Tite Act III brake controller 5520. On the 3014-P product page, if you scroll down you will see a couple of pictures that show where the factory connection plug is for the brake controller.
view full answer...
- Brake Controller Wiring Harness Location 2017 Jeep CherokeeAs you can see at the 1:20 mark in the attached video, the factory brake controller harness on your 2017 Jeep Cherokee will be located under the driver's side dash panel. The connector will be grey in color and positioned just to the left of where the brake pedal mounts to the firewall. In addition to the video, I have attached a photo per your request of the harnesses location.
view full answer...
- Removing Kick Panel of 2014 Jeep Cherokee to Install Brake ControllerInterior panels can fit pretty tight even when the hardware that secures them is removed. You will want to basically pull out and down to get the panel free but you have to be careful not to get too aggressive. The right side should be the easier side to start with. I have cracked interior panels before from trying to just yank them out so you basically have to proceed with caution and just take it slow as you pry the edges of the panel out.
view full answer...
- Where Does Electric Brake Controller Plug In Under the Dash of a 2015 Jeep Cherokee with Tow PackageThe connector to install an electric brake controller in your 2015 Jeep Cherokee is located behind a panel that is to the left of the steering column. They're often tucked up fairly far under the dash. The connector will mate with the adapter # 3014-P that I've attached picture of.
view full answer...
- Installing Trailer Brake Controller on 2015 Jeep Cherokee with Factory Tow Package If your 2015 Jeep Cherokee is equipped with the factory tow package then the Plug-In Adapter Harness # 3014-P referenced in your question is confirmed to fit. We do not yet have an installation video for this harness on the Jeep Cherokee but the process should be similar to, if not exactly the same as, the one found on the Grand Cherokee that you mentioned. The factory port will be located behind a panel to the left of the steering column. It is likely tucked up and hidden a bit under the...
view full answer... - Plug And Play Harness For Prodigy P3 Controller For A 2022 Jeep CherokeeWhen installing your Tekonsha Prodigy P3 Controller you will need the Tekonsha Custom Wiring Adapter # 3014-P. This dual plug in adapter will plug into the brake controller and the other end will plug into the built in port beneath your vehicle's dash. I will attach a picture below showing where to look.
view full answer...
- Plug-In Wiring Adapter Needed to Install Tekonsha Brake Controller in 2015 Jeep Cherokee TrailhawkA plug-in wiring adapter is available for the 2015 Jeep Cherokee Trailhawk. You will need part # 3014-P. Using this adapter allows for quick and easy installation of a Tekonsha brake controller with no cutting or splicing required.
view full answer... - Tekonsha Brake Controller Plug-In Adapter for 2019 Jeep CherokeeI have good news! To install your existing Tekonsha Prodigy P2 Brake Controller # 90885 on your new 2019 Jeep Cherokee all you need is the Plug-In Adapter # 3014-P. Like the harness you had for your previous vehicle, one end of the adapter plugs into the P2 itself while the other end connects to the factory port behind the dash of your Jeep.
view full answer... - Brake Controller and Install Harness Recommendation for 2015 Jeep CherokeeThe brake controller is what controls the power wire that runs to the trailer brakes actually. There would be no need for any additional wiring. For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes....
view full answer... - Recommended Trailer Brake Controller and Wiring for 2017 Jeep Cherokee As long as your 2017 Jeep Cherokee Latitude has an existing 7-Way connector at the rear of the vehicle, a trailer brake controller will indeed be a plug and play installation. For the brake controller itself, I highly recommend the Tekonsha Prodigy P2 Trailer Brake Controller # 90885. This is an excellent, proportional controller that will activate the trailer brakes at the same time and with the same intensity that you apply to them in your Jeep. It features an easy to read, digital...
view full answer... - Brake Controller Recommendation for 2014 Jeep Cherokee with Tow PackageThe P3 brake controller part # 90195 is basically the nicest brake controller on the market and will work great on your 2014 Jeep Cherokee with the factory tow package. Since your vehicle has the tow package it basically is wired for having an aftermarket controller installed in it. The P3 is going to perform better than the Mopar controller and will also cost less so it really is the best route to go. All you need to install it is the install harness part # 3014-P which plugs to the controller...
view full answer... - Will the Tekonsha Wiring Adapter # 3014-P Work With a 2017 Jeep Cherokee Latitude With Tow PackageThe Tekonsha Custom Wiring Adapter, part # 3014-P, is a confirmed fit for your 2017 Jeep Cherokee Latitude with the tow package as long as you are using a Tekonsha brake controller, like the Prodigy P2 # 90885.
view full answer... - How To Install the Tekonsha Prodigy P2 On a 2016 Jeep Cherokee Trailhawk with Factory Tow PackageThe process to install the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885 on your 2016 Jeep Cherokee Trailhawk is very easy to do as it is completely plug and play. This would not require professional installation and can be completed in under 10 minutes I would say. The only thing you will need save for the Tekonsha Prodigy P2 is the Tekonsha Custom Wiring Adapter part # 3014-P. The plug that you will need to locate to use the Tekonsha Custom Wiring Adapter can be found using...
view full answer...
- Brake Controller and Install Harness Recommendation for a 2015 Jeep Cherokee LimitedFor a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. This is a proportional brake controller that senses the amount of braking the tow vehicle is applying and applies a proportionate amount to the trailer brakes. The brake controller install harness part # 3014-P that you referenced is also a fit for your 2015 Jeep Cherokee with the tow package so it would...
view full answer... - Which Custom Harness Is Needed To Install Tekonsha Prodigy P3 In 2022 Jeep Cherokee W/ Tow PackageFor your 2022 Jeep Cherokee with the factory tow package you will need the Plug-In Wiring Adapter # 3014-P. This will plug into the factory trailer brake controller port located underneath the dash of your Jeep and will plug directly into the back of the Tekonsha Prodigy P3 # 90195 you are installing. This will take care of all of the wiring requirements for the controller and make it where all you have left to do is just mount the controller. I included a video of the products mentioned...
view full answer... - Will New Brake Controller Have Burning Plastic Smell When InstalledSince you installed the P2, part # 90885 and the # 3014-P harness on your 2015 Jeep Cherokee, you should not have a burning plastic smell. This should be a very simple install. You did not say if the controller stopped working so I don't know if it was in use when you experienced the smell. I would take the controller out and see if the smell is coming from the controller or if you can locate the origin of the smell. There may be a short in the wiring somewhere that is unassociated to...
view full answer... - How To Remove Panel To Get To Brake Controller Port On 2019 Jeep CherokeeIn order to install a brake controller like the Tekonsha Prodigy P3 Trailer Brake Controller part # 90195 on a 2019 Jeep Cherokee you'll need the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers part # 3014-P. In order to access the factory tow package port you will remove one panel on the lower left hand side of the dash. There is a visible plastic push pin faster that will be removed and then you can simply pull the panel STRAIGHT out. The plug should then be located behind...
view full answer...
- Trailer Brake Controller Connector Location in 2015 Jeep Cherokee LatitudeI'll begin with the assumption that you have a 2015 Jeep 'Cherokee Latitude, as the Renegade and Compass Latitude weren't equipped with the optional factory 7-way. The brake controller connector is located behind the black cover down near the dead pedal where the driver's left foot would sit, as shown in the provided photo, just where the carpet meets the firewall. You'll need to remove that cover by backing out the screw that holds it in place. Once the connector is uncovered, plug the...
view full answer...
- Where Does a Brake Controller Plug Into on a 2014 Jeep CherokeeThe connector is behind the black cover located to the left of the steering column, just above the carpet. I attached a couple pictures that should be helpful, but you shouldn't have to remove the socket from any box. Be sure that you are trying to use the correct connector. Feel free to send pictures of what you described so that I can help you further if the pictures I attached don't help.
view full answer...
- Troubleshooting Brake Controller Install on 2019 Jeep Grand Cherokee that Shows Short Error MessageSounds like you installed your Tekonsha brake controller like P3 part # 90195 using the included factory trailer wiring connector. Since you are seeing a short message on the controller that would indicate to me that you have probably wired the controller's wiring to the wrong wires of your install harness. The blue wire of the controller should run to the circuit labeled brake output, red wire to stoplight circuit, white wire to ground, and black to 12 volt power. If you are seeing a...
view full answer... - Plug-In Brake Controller Wiring Harness for a 2014 Jeep Cherokee TrailhawkWe have brake controller plug-in harnesses available for your 2014 Jeep Cherokee Trailhawk, so you will not have to modify a different harness. For Tekonsha, Draw-Tite, Hidden Hitch, and TrailerMate brand brake controllers, you can use part # 3014-P. At this time, this is the only plug-in style adapter available for your Jeep. If you need a brake controller as well, I recommend the Tekonsha Prodigy P3 Brake Controller, # 90195. This is the top brake controller on the market with more features...
view full answer... - Plug and Play Adapter for a 2019 Jeep CherokeeIf your 2019 Jeep Cherokee has the factory tow package all you will need to install the Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional item # 90885 is the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Dual Plug In item # 3014-P.
view full answer... - Installing Brake Controller And Wiring Adapter On 2014 Jeep Wrangler Trail HawkFor your 2014 Jeep Cherokee Trail Hawk, the brake controller installation is really quite simple. You need to locate the connector under the dash on the left side of the steering column. You then plug the gray colored end of the harness, part # 3014-P into that connector. Route the harness to the location you want to install the brake controller, part # 5504. Next, you will install the brake controller in a location you can easily reach. After you have the controller secured you simply...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Henry K.
6/13/2017
Still working great. Removed during the off-season and reinstalled in 5 minutes this spring.