Access Ramp for Kuat NV 2.0 Bike Rack
(114 reviews)
Price: $98.00
In Stock
Access Ramp for Kuat NV 2.0 Bike Rack
Item # ANVBRB
Retail:$117.65
Our Price: $98.00
You Save: 17%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (114)
- Q & A (0)
- Videos (2)
- Photos
Kuat Accessories and Parts - ANVBRB
- Hitch Bike Racks
- Ramps
- Kuat
- NV 2.0
This access ramp makes it easy to load an e-bike, mountain bike, or any other type of heavy bike onto your Kuat NV 2.0 bike rack. Installs and removes from your bike rack in seconds. Slide ramp out to desired length and collapse for compact storage.
Features:
- Access ramp makes it easy to load a heavy bike onto your Kuat NV 2.0 bike rack
- Works with NV 2.0, NV 2.0 Base, and NV 2.0 2-bike add-on
- Perfect for loading an e-bike, a mountain bike, a cruiser, and any other type of heavy bike
- Installs in seconds - hook to inserts that bolt between wheel tray and end cap
- Simply slide ramp out to desired length and slide back in for compact storage
- Made in the USA
Specs:
- Weight capacity: 60 lbs
- Limited lifetime warranty
ANVBRB Kuat Access Ramp for NV 2.0 Platform-Style Bike Rack
Video of Access Ramp for Kuat NV 2.0 Bike Rack
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Kuat Access Ramp for the NV Bike Rack Review
Our access ramp is gonna make it a lot easier to load up our bike on our NV. You can see you can just easily roll it into place without having to struggle or strain. Normally whenever you go to load up your bike, you have to lift it into place. If you've got a heavy mountain bike, that can just be a little bit more of a strain than you'd like to have. If you've got something even heavier, like a fat tire bike or one of those downhill racing bikes, those can be even more of a strain on your back.Our kits gonna come with our ramp and then an adapter to fit over our NV on the end. Getting it in place is pretty easy, once we have that adapter in place, we'll just affix those two ends onto that adapter.
Then just adjust it out to whatever angle works for you and roll your bike into place. Removing it's just as easy. You can just slide it back together, take it off, and then tighten down the knobs.It's made of a durable metal construction with a nice black powder coat finish so it'll match your NV, if you have the all black one, but black goes with everything so whatever finish you have it'll work.It can handle up to 60 pounds for your bikes so if you've got a cruiser, mountain bike, fat tire bike, this should be able to handle just about anything.The inside width, at the top, is about four inches. Overall it's about 4 1/4. That'll be plenty of space for those wider tires, like your fat bikes.
As far as our depth, it's gonna be about 1 1/2 inches.It's compact enough that you can easily fit it in the back of your vehicle. Then get back to riding.The bracket really isn't gonna change the overall look of your bike rack. It's not gonna interfere with the normal use of it. It does come with two brackets so we can get one mounted on either side. We'll go ahead and show you how to do that now.The kit comes with a tool to remove the two bolts, on the end of the tray, on our NV.
We'll just get those teeth in place. I think, overall, this is kind of the downfall of this kit is that this tool's a little bit short there, to really reach inside but you can get the job done. It's just maybe not the best tool. If you've got a star bit, that'll match that, might be a better option to go with but it is nice that it comes with the tool so you can get it done without having to buy special tools.Now we'll get this one going the rest of the way. Then you'll remove that cap, pull it out.
This'll pop out, don't be alarmed, that's supposed to happen. Then we can just match up our new plate, get our magnet to go back inside our rack, matching it up. Then we'll just mount everything back in place. Nothing too difficult. Just gotta get those bolts threaded back in.With both our adapters in place we can load up both bikes.Now, as far as my overall impression for our access ramp. I think it's a really handy tool to have as an add-on to your NV. My concerns would be that there's a little bit of flex, especially when you have this extended all the way out. That's a little bit concerning but it did the job. Our fat tire bike's pretty heavy and it was able to handle that. I think for your e-bikes, fat bikes, it's gonna be really nice. Especially after you get off the trail and you just don't want to have to work that hard to get your bikes onto your NV rack. This is gonna make is a lot easier so you don't have to struggle as much.
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Access Ramp for Kuat NV 2.0 Bike Rack - ANVBRB
Average Customer Rating: 4.9 out of 5 stars (114 Customer Reviews)
This access ramp makes it easy to load an e-bike, mountain bike, or any other type of heavy bike onto your Kuat NV 2.0 bike rack. Installs and removes from your bike rack in seconds. Slide ramp out to desired length and collapse for compact storage.by: Scott01/23/2024
Our overall experience working with Etrailer was excellent. Bay was very informative when we called. She found the information and answered all of our questions. They took our order, and everything went very smoothly. The delivery arrived as promised. We are very pleased with the overall process.
Thank you. Scott and Debbie Holt.
by: Steve 10/12/2022
Great product bought from great company. Only issue is the hitch locks cover falls off and seem to freeze up easily. Had to cut one off.
by: Judith07/20/2023
A great accessory for dealing with our 50-pound e-bikes. It was quite a tight fit to the rack at first, and therefore hard to put into place, but now that a bit of the paint has scratched off from use over the last year, the ramp fits very well and is still quite stable. It might be somewhat shallow for fat-tire bikes, and our 2 Verve 2+ bikes go up onto the rack easily, though we find it best to have one person in front to maneuver the front tire into its scoop while a second in the back keeps the rear tire in the groove. I can unload my regular bike (a 20+ pound Cannonade) myself without the ramp, but am happy to have the ramp for loading it, but I don't think that the ramp is enough help for me to manage loading or unloading my e-bike solo.
by: Cindy 10/18/2023
We are seniors with e-bikes and we transport them frequently. The ramp is lightweight and works great so that we don’t have to lift the bikes. This has been a game changer for us!
by: Brian 08/20/2023
Access ramp does what it says. I don't use it much since I'm currently strong enough to lift the bikes on to the rack, but can totally see using this for a heavier bike or if I had issues with lifting.
by: Linda06/08/2023
This was out of stock on the Kuat website and I came across etrailer when searching for the ramp. I reached out to customer service for a question and they were prompt and knowledgable. Will not hesitate to order from etrailer again. Customer service is great and the ramp works as intended.
The only thing I was disappointed in is etrailer gives free shipping at $[XX], my ramp was $[XX] and I still had to pay shipping. I know they have to stick to their policy but tax put me over the $[XX] price. Oh well, no worries I will still use them in the future.
by: Tom 07/22/2023
The ramp was fairly easy to install on the Kaut NV 2.0 bike rack except the four bolts are quite tight initially.
by: MR C03/05/2024
Came as ordered, super happy to have it. gonna make loading big bikes so much eazier! thank you folks
by: Diana 08/12/2023
Love my ramp for my bike rack, it's saving my elbow, my assist #bike is heavy. THANKS!!!!
by: Malvin04/15/2021
Ordered this kuat bike ramp and shipped the same day. You cannot get better than that.was only asking if it is available and it was,ordered and shipped the same day. Lori was exceptional.thank you very much.
by: Ted12/07/2020
The rack looks great as well as functional for two fat bikes. Have not taken them out yet but expect it to work fine. Will update later. You will also need to have an additional extender as well as security strap as they only shipped one.
by: Andy 10/20/2022
This ramp is the best thing for heavy e -Bikes.
Andy
10/21/2023
Working just fine. It’s been a year and not one issue.
by: Dana D07/31/2020
Installation was easy to due per the instructions. The ramp operates beautifully. Definitely a great asset when loading the ebikes.
by: Shirley04/07/2021
I am a petite person who needed a bike rack for a heavy bike. The first rack I ordered did NOT work for me. etrailer worked out a return and I was able to purchase a Kuat NV 2.0, with a ramp. We had some trouble assembling the rack, but found etrailer prompt and courteous when responding to our request for help. The ramp was really well packed; all parts included. When in the process of ordering, I found the etrailer's site easy to navigate. I was able to check if the rack would work for my model of car. There were lists with suggestions on what products I might need in addition to the basic rack. There were videos which give great info on features, installation, & use. My email questions were answered quickly and thoroughly. Based on the above experience, I have placed another expensive order with etrailer and am counting on the same outstanding customer service [which all vendors would follow their lead!].
Shirley N.
4/9/2022
Working out well. Get questions about it when people see the ramp. Did end up buying a lighter bike which makes using the rack easier.
by: Loren 02/28/2023
THIS RAMP IS WELL BUILT AND EASY TO USE. I HAVE HAD IT A YEAR, AND HAVE HAD NO ISSUES. MAKES LOADING AN E-BIKE SO MUCH EASIER. I AM IN MY 70’S AND HAVE EVEN USED IT TO LOAD MY MOUNTAIN BIKE WHEN I AM TIRED AT THE END OF THE DAY. MONEY WELL SPENT.
by: Bob08/14/2022
Had to change my bike carrier that was on order for a month or so due supply problems. Glad I did as I switched and purchased a Kuat in its place. Been using it since last summer and handles two heavy E-Bikes with no problem.
etrailer got my new order for the Kuat completed and into my hands in just about two weeks including shipping to Ohio.
by: Vicki 09/02/2023
It works great. It's simple to use even with our heavy e-bikes.
by: John 08/03/2023
Could not load ebike without this, when riding along
by: Chuck 10/22/2020
Recently bought 2 e-bikes for my wife and me, each weighing around 55 lbs. Lifting them up and aligning them on my Kuat NV rack was difficult. E-Trailer helped me find this as the right ramp. I have the original NV rack (love it), been using it for many years, and it can support the weight of the new e-bikes. This ramp arrived earlier than E-Trailer estimated (thanks!) and was no problem to install on my rack. I had to make a minor modification to the Inner end pieces of the rack by cutting off 4 little plastic tabs on each after removing them for the installation, in order to make them fit flush with the new rack clips, but the Dremel made short work of that! Reassembled the end pieces, tightened up the security bolts, and tried out the new ramp with the rack on my car: perfect! And makes loading the e-bikes on the Kuat NV rack a million time easier. This has been a great interaction with E-Trailer, and the product (Kuat NV loading ramp) performs flawlessly, even on my original (not 2.0) NV rack.
by: Jonathan 09/10/2022
Etrailer is a great company to work with. The website is easy to use and very accurate. My order of a Kuat bike ramp extension and loading ramp arrived to days earlier than promised. I will definitely use them again in the future.
by: T12/16/2022
Lifting two 70-pound ebikes onto the rack was not an option for us. This ramp is an elegant solution.
by: Melissa07/31/2022
This ramp is very sturdy. Being able to adjust the length is awesome. It makes it much more useable. The ramp made loading and unloading my EBikes possible for me. Without a ramp I’d not be using my bike. I’m very happy with my carrier and the indispensable ramp.
by: Bethany04/15/2022
This is an excellent product! the best bike rack out there, in my opinion. I purchased the extra retractable metal ramp to get my e-bike up and rolled across to the front wheel stirrup. Totally solid and good-looking design. Sturdy and built to last; no wobbles and secure lashing for back tire with the front arm snugly positioned over the front wheel. I love it!
by: Ardell07/04/2019
We purchased this ramp to use with the Hollywood Racks Sport Rider SE 4 Bike Platform Rack because Hollywood does not have a ramp yet. This ramp appeared to be sturdy and the correct size to attach to the loops on the Hollywood rack. With minor adjustments to create an easily removable attachment to the loops it has been working well for out e-bikes.
by: James04/01/2022
The transaction with etrailer.com was excellent. I ordered my Kuat NV2.0 Base on the 27th and had it the afternoon of the 31st as promised with free shipping. My only quibble with etrailer's website is it would have been nice to have had a features comparison with other models. I thought the rack I was getting had a built in lock but upon receiving it I now realize I needed the next model up, but that's mostly on me.
I chose the Kuat NV2.0 rack because my wife got a step through e-bike so I needed a platform style hitch mount rack that didn't depend on holding the bike's crossbar or rear tire (the bike has a rack and fenders). I had her try to put her bike into another brand at the shop and it was too heavy for her to lift in. Kuat has a ramp option that we also purchaced.
The rack itself is very sturdy and with the ramp my wife can load her bike by herself. That was a requirement. The rack is heavy and I've yet to see if she can put it on the car herself. One nice feature is a mechanism to keep the rack from rattling in the receiver. It tilts up vertically when not in use and also tilts down to allow the hatch to open. It locks onto the receiver but if you want the bike to lock you need to get the model up from the 'base'. I haven't road tested it yet but the only minor deficiency I see is the front tire is held in it's cradle only by the pressure arm. The back tire has a ratchet strap. The front tire probably should have as well. If the bike's front tire got free of the pressure arm while driving it would get ugly fast. I plan on using my own straps to provide additional securing for the front tire and will use my cable lock for those times I leave the car unattended.
25
114
Show More Reviews
See what our Experts say about this Kuat Accessories and Parts
- How Long is the Access Ramp for Kuat NV 2.0 Bike RackThe Access Ramp for Kuat NV 2.0 Bike Rack # ANVBRB is 53.5" long when fully extended and 31.5" long when collapsed. You are also able to slide the ramp out to the length that you need if you do not need a full 53.5". This ramp works with the NV 2.0, NV 2.0 Base, and NV 2.0 2-bike add-on.
view full answer... - Bike Rack Similar to Thule T2 that Has Ramp SetupI have a solution but there isn't a way to adapt the Kuat bike rack ramp part # ANVBRB to fit your Thule T2 Pro XTR nor is there a similar option that can fit your specific rack. If you were in need of a bike rack setup with a ramp you'd need to go with a new rack like the Thule EasyFold XT part # TH903202 which has a ramp that pulls out of it for easy loading.
view full answer... - Where Does Access Ramp For Kuat NV StoreThere isn't a storage area on the actual bike rack itself for the Access Ramp for Kuat NV 2.0 Bike Rack # ANVBRB. When you use the ramp and remove it, you'll want to store it in your vehicle when you are out on the trails or in your garage or wherever is easiest for you when you aren't transporting your bikes. I have added a link below to a video review for you to check out as well of the Access Ramp for Kuat NV 2.0 Bike Rack # ANVBRB.
view full answer... - Does Ramp for Kuat NV 2.0 also Fit the 2 inch Hitch Version of the Bike RackYes, the Kuat Ramp part # ANVBRB also works with the Kuat NV 2.0 that fits the 2 inch hitch part # NV22G.
view full answer... - Locking the Kuat NV with the Access Ramp AdapterYes! When using the Access Ramp for Kuat NV 2.0 # ANVBRB, you lift the end cap out of place, then place the mounting bracket in between, then reinstall the end cap with the locks. This way, the Kuat NV 2.0 # NV22G functions and locks the same way, you just have an extra piece on the end for your ramp. I attached a video showing the install process of the end cap mounting bracket as well as the Access Ramp itself.
view full answer... - Electric Bike Rack Recommendation for a Class I 1-1/4 Inch Hitch ReceiverWe do have a variety of 2-bike racks compatible with a Class I 1-1/4" hitch receiver. Since you have e-Bikes you need to carry this does whittle down the options some but we still have a solution for you. My personal favorite is the Kuat NV 2.0 Base 2-Bike Platform Rack # BA12B because of how easy it is to use and how sleek this rack looks. It comes with locks for the bike and rack plus it uses a foot lever for the tilting and folding features which is much easier than other rack. One...
view full answer... - Access Bike Ramp For A Kuat NV 2.0 Bike Rack On A 2022 Chrysler Pacifica There actually is a ramp that can be used for exactly what you're needing on your Kuat NV 2.0 # BA22B. Take a look at the: -Access Ramp for Kuat NV 2.0 Bike Rack # ANVBRB. This ramp will quickly and easily install into your bike rack, and will make it easy to load an e-bike, mountain bike, or any other type of heavy bike. Please note that this ramp has a maximum weight capacity of 60-lbs.
view full answer... - Availability of Ramp to Help Loading of Kuat NV Bike RackWe do have a ramp for the Kuat NV 2.0 part # BA12B with the part # ANVBRB which is exactly what you are looking for.
view full answer... - Best 4-Bike Rack Recommendation with Ramp You really can't beat the Kuat NV 2.0 bike rack # NV22B with the ramp # ANVBRB for a super easy and high quality bike rack setup. The NV is widely considered to be the best rack you can get due to how well it's made, how easy it is to use, and high quality features other racks don't have like the ramp and repair stand. The RockyMounts Split Rail isn't a terrible rack at all but the lower ground clearance might cause the rack to drag and potentially get damaged. I attached review videos...
view full answer... - Availability Of Ramp Attachment For Older Kuat NV 2 Bike RackThe Access Ramp # ANVBRB is the correct ramp for the Kuat NV 2.0 # NV22G. The ramp will work with any NV 2.0, NV 2.0 Base, and NV 2.0 2-bike add-on. If you have the older Kuat NV 2 model, this ramp will not fit. We no longer carry the older model, and we do not have any ramp available that will fit. It may be possible to modify the connection plates somehow, but we cannot recommend modifying any of these parts.
view full answer... - Kuat Bike Rack that Can Have Ramp Added to ItThere isn't a ramp setup that works with the Sherpa. Only option we'd have would be to upgrade to the NV bike rack part # BA22B so that you could use the ramp part # ANVBRB that you referenced.
view full answer... - Can The Kuat NV 2.0 Hold Two Electric Fat Bikes?The Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches # BA22B is a great bike rack for 2 electric bikes. Just make sure the bikes weigh less than 60lbs each or remove the battery pack to try to reduce the weight down to the 60lb weight limit which you do not want to exceed. Also make sure your tires are no wider than 3", if they are wider then you will want to add fat tire adapter # APBK which can hold up to 4.8" wide tires. You can certainly use Access Ramp # ANVBRB on this bike rack...
view full answer... - Does Kuat NV 2.0 Bike Rack Work With 2 Inch Draw-Tite Trailer Hitch ReceiverThanks for the purchase of the Draw-Tite Max-Frame 2" Trailer Hitch Receiver # 75227 for your 2013 Land Rover Evoque, and the answer is yes, you can absolutely use the NV 2.0 bike rack you asked about, which is the following part number: - Kuat NV 2.0 Bike Rack for 2 Bikes # NV22G The NV 2.0 # NV22G is 100 percent compatible with all 2" Draw-Tite hitches, including the one for your Land Rover, and includes everything needed to install the rack in the hitch, so you don't have to purchase...
view full answer... - Recommended Bike Rack For 2 E-bikes on a 2022 Honda CR-V With 2 HitchThe bike rack that I recommend for your 2 E-bikes on your 2022 Honda CR-V with 2" hitch is the Kuat NV 2.0 Bike Rack for 2 Bikes # NV22G. This bike rack will hold 2 bikes weighing up to 60 lbs. per bike, tires up to 3" wide and includes a repair stand. This bike also has a tilting feature to allow access to your rear cargo area. If you have tires larger than 3" wide you can add the Phat Bike Adapter Kit # APBK which will allow you to hold tires up to 4.8" wide. We also have the Access...
view full answer... - Bike Rack Recommendation for a 2023 Tesla Model Y with OEM Hitch ReceiverI do have a great bike rack recommendation that's not only functional but it also compliments the sleek look of your 2023 Tesla Model Y: - Kuat NV 2.0 Base Bike Rack # BA22B Kuat has done amazing work with this rack with how easy it is to use and the types of bikes it can accommodate as it can handle up to 60 lb bikes with up to 3.0" wide tires (5.0" tires with the Phat Bike Adapter Kit # APBK). We even have the Access Ramp # ANVBRB as an add-on to help make loading and unloading your...
view full answer... - Will I Have Trunk Access On My 2018 Lexus RX350 When Kuat NV 2.0 Bike Rack Is Installed?The trunk door / tailgate of your 2018 Lexus RX350 should be able to clear the Kuat NV 2.0 Bike Rack for 2 Bikes - 2" Hitches - Wheel Mount - Gunmetal Gray # NV22G. I attached a video in which we demonstrate this exact thing on a 2017 Lexus RX350 and you can see the Kuat NV 2.0 is far enough away for the trunk to open properly when bikes are still installed. This was able to be done because the bike rack was in the tilted back position. You would also be able to open the trunk properly...
view full answer... - Will the Thule EasyFold XT Work with My Factory Hitch on My 2021 Tesla Model Y?In order to know for sure if the Thule EasyFold XT # TH903202, we need to know whether there is less than 8 inches from the center of the hitch's pinhole to the outside of your rear bumper. In order to confirm this fit, I recommend measuring the center of your hitch pinhole to the front face of your bumper. If that measurement is less than 8 inches, then the EasyFold XT will fit. Another thing that is important to remember about the EasyFold XT is that the hitch's pinhole must be at least...
view full answer...
- 2-Bike Add-On & Access Ramp For A Kuat NV 2.0 Base Bike RackYes we do, it sounds like you're looking for the: -2-Bike Add-On for Kuat NV 2.0 Base Bike Rack for 2" Hitches # BA02B. This is the two-bike add-on you're needing for your Kuat NV 2.0 Base Bike Rack for 2 Bikes # BA22B. Additionally, since you did mention that you also wanted the access ramp, we also have that available: -Access Ramp for Kuat NV 2.0 Bike Rack # ANVBRB. included are a couple of videos for you to check out as well.
view full answer... - Recommended Electric Bike Rack for 2015 Ford FiestaI do have an option for you, but the Hollywood Rack SportRider SE # HLY74FR is actually for Class 2 or 3 hitches. Even thought it will fit a 1-1/4 hitch, yours is a Class 1 which will make it incompatible. Another option, especially if the bike is too heavy for you to carry, is the Kuat NV 2.0 for 1-1/4" Hitches # BA12B. You can purchase the Access Ramp # ANVBRB that you can attach to the bike rack so you can roll your bike up/down instead of lifting it. It does have a weight capacity...
view full answer... - Recommended Trailer Hitch for a 2021 Mazda CX-30 With Over 200 lbs Tongue Weight RatingWe do! For your application you can use the EcoHitch # EH55VR for your 2021 Mazda CX-30. This has the hidden crosstube design and is rated for 375 lbs tongue weight so the hitch itself can handle 2 e-Bikes and a carrier with no issues. It is worth noting that there doesn't seem to be a tongue weight rating for your CX-30 so you might want to check with your local dealer to see if they have any ratings they can give you. If you don't already have a bike rack then I recommend checking out...
view full answer...
- Will My 2-1/2 Wide Bike Tires Fit on the Ramp Included with the Yakima OnRamp # Y96FR?I have a great solution for you. The ramp on the Yakima OnRamp - 1-1/4" # Y96FR measures about 2 inches. However, I confirmed with Yakima that your bike with 2-1/2 inch tires will work just fine. They will just ride the side of the lips of the ramp when loading. If you want a ramp that fully accommodates the tires on your bike, I recommend the Kuat NV 2.0 Bike Rack for 2 Bikes - 1-1/4" Hitches - Wheel Mount # NV12G along with the Access Ramp for Kuat NV 2.0 Bike Rack # ANVBRB. With the...
view full answer... - How Sturdy Is the Kuat NV 2.0 Base 2-Bike Platform RackThe Kuat NV 2.0 Base 2-Bike Platform Rack part # BA22B or part # BA12B is one of the best bike rack options on the market. It has a 60 lb per bike weight capacity so most e-bikes will not be a problem and you can add a ramp, the Access Ramp for Kuat NV 2.0 Bike Rack part # ANVBRB for easy loading. In regards to stability, all bikes rack are going to have movement but since the Kuat NV 2.0 uses a solid one-piece shank, there will be far less play and the bike rack will be much sturdier....
view full answer... - Best Hitch Bike Rack for Carrying Giant E-BikesFor your Giant E-Bikes I'd recommend the Kuat NV part # NV22G for a very secure and easy to use bike rack with enough weight capacity as well. This grabs the bikes securely by the wheel/tire instead of using a frame clamp. To make loading the bikes easier we have the ramp kit part # ANVBRB as well. The NV also has a repair stand built into it in case you had to work on the bikes while out riding but if you preferred a version without that the NV Base part # BA22B is the same rack without...
view full answer... - Is The Thule T2 Pro X Compatible With Any Ramps For Heavy E-Bikes? I took a look at what we have for the Thule T2 Pro X Bike Rack for 2 Bikes # TH83GC, however there actually isn't an option to use a ramp with this bike rack. Instead, to use a ramp you'd have to use an entirely different bike rack. If you're interested in this option, I recommend taking a look at the: -Kuat NV 2.0 Base Bike Rack for 2 Bikes - 2" Hitches # BA22B, with the ramp # ANVBRB. This ramp will slide directly into the Kuat NV 2.0, and provide an easy loading solution for heavy...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Video by:
Andrew K
Edited by:
Tyler C
Expert Research:
Jameson C
Installed by:
Kathleen M
Installed by:
Cole B
Video Edited:
Chris R
Written by:
Matthew S
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Steve
10/13/2023
Still works fine. Not using it as much as expected. Still easier to lift the bike