Torx Head Screwdriver Bit for WLS100 Wall Liner Screw

See what our Experts say about this Redline Accessories and Parts

• Recommended Hardware to Attach the Full Size Locking Steel Flush Door Latch
  The Full Size Locking Steel Flush Door Latch part # L3980 can be mounted with a variety of different types of hardware. As you mentioned, pop rivets or carriage bolts would be the most secure. You could also use something like the Long Black Torx Wall Liner Screw part # WLS100 as torx bits are more of a speciality tool. The correct bit for this screw is part # TX425. If you have a metal door you could weld it on as well.
  view full answer...
• How Many 1 Inch Long Black Torx Wall Liner Screw are in a Pack
  The Redline 1" Long Black Torx Wall Liner Screw, part # WLS100, is sold singly. This way you can order just as many as you need. If you need a screwdriver bit for these screws you will want part # TX425.
  view full answer...
• Need Drill Bit to Remove a Torx Fastener
  It sounds like you are describing a Torx fastener, which has a star-like pattern. We do offer both Torx screws and screwdriver/drill bits in several sizes. Part # TX430-1 is a 1/4-inch TRX 30 size bit. Part # TX425 is a TRX 25 size bit.
  view full answer...
• Recommended Screws for Installation of Plywood on Enclosed Trailer Wall
  The 1" Long Black Torx Wall Liner Screw # WLS100 is the best option for the plywood installation. These screws are fine thread and made for metal studs. They have a tapping edge but often a starter or pilot hole should be drilled. You can then use the Torx Head Screwdriver Bit for WLS100 Wall Liner Screw # TX425 to snug the head flush.
  view full answer...
• What Tool Is Needed to Remove Screws from Flush Mount Rails on a 2018 Honda Pilot
  It looks like you will need a Torx Head screwdriver that looks like bits # TX425 or # TX430-1 but I am not sure what size. Once you remove the screws you can then install a roof rack on your 2018 Honda Pilot. If you don't already have a roof rack I highly recommend the Thule WingBar Evo roof rack. This includes 53" bars # TH711420 for black or # TH711400 for silver, along with the Podium Foot Pack # TH460R, and the Fit Kit # THKIT3132. This is a great roof rack that helps reduce wind noise...
  view full answer...
• How are the Long Black Torx Wall Liner Screws Measured
  The 1" Long Black Torx Wall Liner Screw part # WLS100 is measured from the head to the tip, so it is 1" long from the highest point to the lowest point. It uses a T25 bit like part # TX425. We do have the Long Black Torx Wall Liner Screws available in 1-1/2" long part # TFX150, 2-1/4" long part # TFX225, and 2-1/2" long part # TFX250 but these use a T30 bit like part # TX430-1.
  view full answer...

Do you have a question about this Accessories and Part?